TechniSat DigiCorder S2 manual 106

Page 106

Problem	Possible cause		Solution

Time not displayed in stand-by	Time not acquired	Set to major channel, e.g. ZDF for
mode		approx 30 secs.

Receiver cannot be operated	Receiver blocked	>	Press on/standby key on recei-
		ver or remote control for approx. 5
		secs.

Receiver cannot be switched on or	Receiver blocked	Perform flash resert. Note! All perso-
operated		nal settings will be lost.
		>	Disconnect mains power.
		>	Simultaneously press standby
			and programme up key on
			receiver and keep them pres-
			sed down.
		>	While standby and programme
			up key are depressed, recon-
			nect mains power.
		>	Keep keys pressed down
			approx. 5 secs. until display *
			“FLAS” appears.

USB device not recognised	USB device formated in incorrect file	Format USB device in file system
	system	FAT32

No hard drive recordings possible	Hard drive is full	Delete existing recording(s)

Deleting hard drive recordings not	File system of hard drive damaged	Check hard drive (Point 8.3.5)
possible

Second encrypted programme can-	The two programmes selected are	Select two programmes located on
not be viewed.	not located on the same transponder	the same transponder

	CI dual decoding not switched on	Switch on CI dual decoding
		(see Point 6.5.3)

	The CI module used is not compati-	Use a CI module with “Dual Decrypt”
	ble with “Dual Decrypt”	capability

106

Image 106

Contents DigiCorder S2 DiSEqCContents Operation Playback Changing basic programmingUse with a rotating antenna Remote control IllustrationsVCR Dear customer Please read this first Disposal adviceImportant notes on operation Safety notes NelOperating breaks HinweisConnecting the DVB receiver VCRExternal unit Mains power connectionConnection to a television set Appliance with S-Video input Hosiden Video cassette recorder VCRHi-Fi amplifier USB socket Initial installationSerial interface RS Operating languageAntenna configuration Country settingAntenna signals Software updatingProgramme/channel search/ISIPRO Operating language SettingsEnding the installation assistant Loading SFI dataTime difference to GMT hours Basic settingsRemote control code CountryAudio/Video settings Audio/Video settingsAccepting settings Stand-by clockVCR Scart mode Language Audio signalsTV Scart mode Picture formatAccepting/storing settings Antenna settingsAntenna settings Setting the switching matrix Switching DiSEqC on and offAntenna signals DiSEqC on or offAdditional settings/LNB properties LNB TypeTest Transponder Symbol rateSignal level/quality Transponder frequencySeveral Favourites lists Special functionsRotating antenna Display time Information BannerOperation Switching on and offUsing the programme up/down keys Programme selectionUsing the Navigator programme list Using the numeric keysSelecting a list Calling up blocked programmes InfoboxOption channels Receiving encrypted programmesSpecial functions OptionSimultaneous reception of two encrypted pro- grammes Volume controlSelecting a starting time Option keyPress the key Language selection Dolby Digital AC3 modeSelecting a different language Dolby DigitalDisplay clock and programme information TV/Radio switchingReturn to last programme previously selec- ted Additional programme informationTransponder information Using the videotext decoder of your televi- sion setUsing the internal videotext decoder Freeze frameStop mode Sub-titlesElectronic Programme Guide SFI SiehFern Info PIP function picture in pictureSFI functions allow you to Acquiring downloading SFI data Interrupting the download procedureCalling up the Electronic Programme Guide Now Table with current programme con Tents NextSFI functions MoreSFI Info SFI timer programming Timer settings pre- and post-run time Deleting the SFI timer eventDelete timer Timer pre-run time resp. Timer post-run timeSFI overview by programme type Genre Display SFI overview of other channelsHard drive operation Sleep TimerEnding SFI mode GamesInstant recording Timer-controlled recordingRecording Timeshift recordingInstant recording Starting a recording manually Ending a recording manuallyEnd recording automatically Video recorder timer Timer recordingsHard drive timer Channel-switching timerDate Manual programming of timerManage timer StartRepeat Timer overviewSaving data to memory Programming a new timer event Changing timer programmingDelete timer programming Timer overviewTimeshift-Funktion TimePlayback function Setting markers while recordingPlaying back recordings Reproducing hard drive recordings Fast forward and rewind Pause/Freeze frameTimes Slow motion Display Playback modeJogshuttle-Funktion Single frame progressJumping to markers Setting markersEnd playback session Skipping titles/tracks Playing MP3 files On-screen controlsPause Display control Switching folder levelsLanguage select key Skipping titles Function Display Screen2.3 MP3 playback modes Viewing picturesDelete Managing the hard driveManaging recordings Show next/previous pictureEdit Setting a markerParental control Going to any spot of the recordingRenaming a marker Deleting a markerSkip to marker Delete markerDeleting a section Extracting a sectionSplitting a recording Renaming a recording Enlarging a videoManaging music/pictures CopyingMoving Marking a blockDeleting Sampling MP3 files/showing picture filesMarking blocks Copying recordingsExporting Copy recordingsPreview Hard drive maintenanceHard drive information Checking the hard drive Configuring the Favourites listChanging the basic programming Formating the hard driveSelect a Favourites list Calling up the programme list managerSelect Total list Add Adding programmes to the Favourites listMarking blocks Use the arrow keys left/right to mark Yes or No Deleting from the Total listRemove Key RemoveSorting programmes SortUpdating time Programming the electronic programme guideUpdating Start categoryProgrammes SFI channelSelecting TV channels/programmes GenresSelecting radio channels/programmes PIN query mode Parental controlChanging the PIN Selecting a TV channelProgramme search/scan Selecting radio stations/programmesAutomatic scan Search modeSatellite scan Transponder scan SatelliteLines PCR PID, Audio PID and Video PID Manual searchArrow keys left/right to select the field Yes, During the search After the searchActivate factory default setting Service settingsDelete all programmes Update programme list automatically UpdateUpdating the programme list Isipro Deleting programmes Update programme list manuallyAdapting programmes Adding a TV resp. radio programmeUpdating software Encryption system System configurationCopying settings Manual initialisation of the CI moduleEast and West limits Use with a rotating antenna DiSEqCDeleting existing limits Set East limit Setting the East limitSetting the West limit Set West limitGeo-positioning Setting a satellite position 50,2Adjusting the satellite antenna Setting a user-defined satellite position User satellitePositioning antenna manually Test transponder/LNB configurationAutomatic fine adjustment Autofocus Satellite listCurrent satellite list Saving a satellite positionReference position Deleting a satellite positionTurning to a satellite position Technical terms Modulation at 22 KHz Software updateLNB/LNC Low Noise Block converter Parabolic dishSupply current TransponderUniversal LNB Intermediate frequencyTechnical data Videotext Output digitalVideo parameters Output VHS Hosiden socketPower supply Mains adapter plug Power consumption TimerRemote control system Number of programmesTroubleshooting guide Problem Possible cause Solution106 Annexure Co-ordinates of selected German cities City/town Degrees longitude E Degrees latitude NCo-ordinates of selected German cities Co-ordinates of selected German cities Index PIN Using the programme list Switching on and offProgramme selection Using the programme up/down keys Volume control