TechniSat DigiCorder S2 manual PIP function picture in picture, SFI functions allow you to

7.14 PIP function (picture in picture)

		Your receiver is equipped with a so-called PIP function. This
		allows you to view a second, smaller picture (PIP picture) wit-
		hin the larger main picture.
Main picture	PIP image >		Press the PIP key to switch on the picture in picture
			mode (Fig. 7-16).
			The current main picture, which can be sourced either
			from a TV programme or from a hard drive recording,
			will be displayed as a small (PIP) picture in the upper
			right corner, and the TV programme last viewed will be
			displayed as the main picture.
			The soundtrack of the main picture will always be
			reproduced when in PIP mode.
		>	Press the Back key to exchange the two pictures.
(Fig. 7-16)			The PIP picture will be displayed as the main picture,
			and vice versa.
	>		To switch off the picture in picture mode, press the
			PIP key again.

7.15Electronic Programme Guide SFI (SiehFern Info)

Your digital receiver features an electronic programme guide. This allows you to display programme information related to one or more programmes on your screen.

You can very quickly obtain an overview of the currently run- ning programmes, the programmes of the day or those of the following days.

The SFI functions allow you to:

-display information on programme contents on screen

-mark specific programmes that will then be automati- cally switched on when the programme begins

-programme timers

-search for and view programmes according to the pro- gramme type (genre).

36