TechniSat DigiCorder S2 manual Basic settings, Time difference to GMT hours, Country

6.2 Basic settings

To obtain the optimum benefit from your DVB receiver, you must still make some settings for your personal convenience and use.

>Press the Menu key to call up the Main Menu.

>Use the arrow keys up/down to mark the line

Settings.

>Confirm by pressing OK.

The sub-menu Settings will be displayed. (Fig. 6-2)

>Use the arrow keys up/down to mark the line Basic settings.

>Confirm by pressing OK. The menu Basic settings will be displayed. (Fig. 6-3)

>Use the arrow keys up/down to move the marker within the menu, and to change the individual posi- tions as indicated. When selecting a menu item, plea- se also note any messages displayed on screen. The following settings can be made:

6.2.1 Time difference to GMT (hours)

Your receiver is equipped with a clock. This is synchronised to Greenwich Mean Time via satellite.

If under Country (Point 6.2.2) you have selected the setting None, you must simply correct the time accordingly relative to your local time, using the arrow keys left/right. For Germany, this difference is +1 hour, and + 2 hours in sum- mer.

6.2.2 Country

This function allows the adjustments for the difference to GMT, as well as the change-over from standard to daylight savings (summer) time to be made automatically.

>Use the arrow keys left/right to enter your coun- try (location) in the line Country.

6.2.3 Remote control code

At this stage you must decide whether your receiver should be allocated to the remote control option SAT1 or SAT2.

>To do this, press the SAT1 resp. SAT2 as well as the OK key on the remote control simultaneously.

(Fig. 6-2)

(Fig. 6-3)

19