Example 1: 2 satellites
Astra 19,2° | Eutelsat 13° |
A | B | A | B |
Position | Position | ||
| 2/1 |
| 2/1 |
output | output | ||
Example 2: 4 satellites
Astra 19,2°/ | |
Eutelsat 13° | Türksat 42° |
>Press the OK key.
A selection table listing various satellites will now be displayed.
>Use the arrow keys to mark the desired satellite. Use the arrow keys up/down to move the marker up or down one line at a time, or use the arrow keys left/right to move the market backward or for- ward one page at a time.
If the desired satellite is not included in the list, please use one of the reserve slots, marked User 1 to User 13.
>Confirm by pressing OK.
The marked satellite will now be added to the menu Antenna settings at the previously marked posi- tion.
You can now adjust the settings in the menu Antenna set- tings, in this manner until the settings in this menu corre- spond to those of your receiving unit. For any switching crite- ria that you do not require, use the setting No satellite.
A B C D | A B C D |
4/1 | 4/1 |
output | output |
Example 3: 4 satellites (Quattro-LNBs)
Astra 19,2°/ | |
Eutelsat 13° | Türksat 42° |
Multiswitch | Multiswitch |
9/8 | 9/8 |
outputs | outputs |
A B A B
Option Option
output output
6.4.4 Additional settings/LNB properties
Once you have completed adjusting the switching matrix of your DVB receiver to the requirements of your receiving installation, you must still check and, where necessary, cor- rect the other settings for your receiving unit.
>Use the arrow keys left/right to move the marker to the column Configuration.
>Now, in the line in which you wish to check or change the settings, use the arrow keys up/down to mark the field Continue.
>Confirm by pressing OK.
A
The following settings/adjustments can be made:
LNB Type
>Use the arrow keys left/right to enter the type of LNB you are using. The options are Single LNB,
Quatro LNB, DisiCon 1 LNB, DisiCon 2 LNB, DisiCon 4 LNB,
SatCR LNB and a User LNB for manual entry of LNB data.
24