TechniSat DigiCorder S2 manual Hard drive operation, Sleep Timer, Games, Ending SFI mode

>To display the programme content of a specific day, press the corresponding numeric key.

7.15.8 Ending SFI mode

>Press the Menu or the TV/Radio key to return to normal operation.

7.16 Sleep Timer

>Press the Sleep timer key once or several times to set the switching-off time of the receiver in the range of 15 minutes to 2 hours.

At the end of the time selected the receiver will switch automatically to stand-by mode.

7.17 Games

Your receiver is equipped with games you can play on screen, using the remote control.

To start the games, proceed as follows:

>Press the OK key to open the navigator.

>Press the red function key Category to open an additional window.

>Use the arrow keys up/down to mark the line Games and confirm by pressing OK.

A list of the available games will now be displayed.

>Use the arrow keys left/right to select the desired game, and confirm by pressing OK.

>You can now proceed to play the game, using the remote control. Please note any messages displayed on screen.

8 Hard drive operation

Your PVR receiver (PVR=Personal Video Recorder) is equipped with an integrated hard disk drive. There is no pro- vision for this drive to be exhanged other than by an authori- sed TechniSat retailer/technician. Due to the availability of the hard drive, you no longer require an external storage medium (e.g. a video recorder). The recording capacity is dependent on the size of the hard drive and on the volume of data of the broadcast material.

Where these are available from the provider, the recording will include the actual audio and video data, as well as any sub-titles, videotext data and additional sound channels bro- adcast. These can be called up when you play back the recording, as described in Points 7.5, 7.12 and 7.13.

43