TechniSat DigiCorder S2 manual Operation, Switching on and off, Programme selection

Accepting settings

To store the settings made in this menu to memory, please proceed as follows:

>Press the green function key Accept to store the changes made, and to return to the menu Settings.

alternatively:

>Press the red function key Back.

A query will be displayed, as per (Fig. 6-13).

>If you wish to accept the changes, use the arrow

	keys left/right to click on the field Yes, and confirm	(Fig. 6-13)
	by pressing OK.
	You will now return to the previous menu.
>	Press the TV/Radio key to return to normal opera-
	tion.
	Settings will not be saved.

7 Operation

7.1 Switching on and off

>Switch the digital receiver on by pressing the On/Standby either on the receiver or on the remote control.

>Press the key again to switch the receiver off again.

>The receiver is now in stand-by mode, and (if activa- ted in Point 6.2.4) the display panel will show the cur- rent time.

If the time is not shown, this must still be acquired by the receiver. To do this, switch the receiver on, and select a major channel such as ZDF for approx. 30 seconds, to automatically acquire the time.

7.2 Programme selection

7.2.1 Using the programme up/down keys

>Use the programme keys up/down either on the receiver or on the remote control to move up or down the list one programme slot at a time.

27