JVC DR-MV1B Care And Handling Of Discs, Label side, Recording side, Storage, Maintenance of discs

Page 11

Filename [DR-MV1SEK_03DiscInfo.fm]
DR-MV1SEK_00.book Page 11 Thursday, April 15, 2004 3:30 PM	Masterpage:Right+
DR-MV1SEK_00.book Page 11 Thursday, April 15, 2004 3:30 PM
	DISC INFORMATION EN 11

Care And Handling Of Discs

How to handle discs When handling a disc, do not touch the surface of the disc.

Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be

picked up correctly, and such a

disc may cause the unit to malfunction.

Label side

Do not damage the label side, stick paper to or use any adhesives on its surface.

Recording side

Make sure that discs are not scratched and dirty on the recording side before use. Scratches and dirt on the recording side of a disc may hinder proper playback and recording. Also be careful that a DVD-RAM disc may get scratched or dirt when removed from cartridge then put back in after use.

Storage

Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the humidity or temperature is high. Avoid leaving discs in your car!

Maintenance of discs

If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the centre outwards.

If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any anti-static agents.

CAUTION:

Sometimes during playback, noise may appear or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.)

These symptoms are caused by the discs, not by the malfunction of the unit.

Page 11

April 15, 2004 11:28 am

Image 11

Contents DR-MV1S DR-MV1B MasterpageLeft0 Filename DR-MV1SEK02Safety.fmMains outlet April 15, 2004 1127 amTo mobile phone users MasterpageRight+Do not place the unit Do not block the unit’s ventilation openings or holesMasterpageLeft+ Some Do’s And Don’ts On The Safe Use Of EquipmentAbove ALL Operate the VCR deck while recording on the DVD deck Engage the DVD deck’s timer mode. pgEngage the VCR deck’s timer mode. pg Watch another programme while recording on the unitContents DVD-R About DiscsRecordable/playable Discs DVD-RAM DVD-RWUnplayable Discs Discs For Playback OnlyRegion Number DVD-RAM Recording Medium And FormatFile Structure Of Discs DVD Video Marks Recording side Maintenance of discsCare And Handling Of Discs Label sideApril 15, 2004 319 pm Front ViewFilename DR-MV1SEK04Name.fm Rear View C D EF GFront Display Panel On-Screen Display VCR deck On-Screen Display DVD deckHow To Use Remote ControlCheck Contents Basic Connection To connect to a TV with AV input connectorsWhen your TV’s Scart Connector acceptsBefore starting, make sure of the following Auto Set UpNumber Set Auto Channel Set/Auto Clock Set/Auto Guide ProgramSet/Auto Guide Program Number Set Preset DownloadCable pg , the unit will automatically perform Preset Download instead of the Auto Set Up in on page 19. AfterLink Functions DVD Deck Only Results Of Auto Set Up/Preset Download AppearingOn The Front Display Panel Enter On-screen Language SetMenu/Audio/Subtitle Language Set DVD deck only Deck Only Satellite Receiver Control Setting DVDInstalling Satellite Controller Setting Satellite Receiver’s Brand And ChannelBrand Name Code Letter Box Monitor Set DVD Deck OnlyPan&Scan/Letter Box Pan&ScanBasic Playback High-Speed Search Playback FeaturesSkip Search Resume FunctionStill Picture/Frame-By-Frame Playback Slow MotionSubtitle Selection Stop modeAngle Selection Checking The Time InformationPress Audio or w e to select Audio Language/Sound SelectionAudio Channel Selection Playback Control PBC FunctionPressing 2 or 6 allows you to locate the desired scenes Live Memory PlaybackTo Watch a Programme Previously Recorded While Recording Recording/playback Status DisplayRecording screen Overview Of Live Memory PlaybackDisplay During Live Memory Playback Buttons To Be Used During Live Memory Playback Basic Operation On The On-screen Bar Using The On-screen BarHow To Access The On-screen Bar Contents of the on-screen bar during playbackAudio CD/Video CD/SVCD/JPEG/MP3 Repeat PlaybackDuring playback DVD-RAM/RW/RTime Search Press Enter to clear 3D-ON from the screen Adjusting The Picture QualitySimulated Surround Effect While stopped Setting The Progressive Mode Programme PlaybackPerform steps 1 Select The Switching Interval Of The Slide ShowRandom Playback To Set Parental Lock For The First Time To Change The SettingsParental Lock To Temporarily Release Parental LockRecording Resume Function Recording ModeBasic Recording Watch Another Programme While Recording On The Unit Recording FeaturesInstant Timer Recording ITR Slide the TV/CABLE/SAT/DVD switch to TVRecording time Free Rate FunctionSelection Of The Audio Channel To Be Recorded On a Disc Disc spaceSatellite Receiver Users Timer ProgrammingVideo Plus+ Daily/Weekly RecordingPDC Recording Manual Timer ProgrammingPress PROG/CHECK to access the Programme Check screen Disc On-Disc Timer ProgrammingTo Timer-record The Programme With The Programmed How Discs Are Overwritten To cancel the programme When Programmes Overlap Each OtherCheck, Cancel And Change Programmes CancelAbout the Automatic Satellite Programme Recording Indicator on the front display panelCompact VHS Usable cassettes Full-Size VHSIndex Search Playback Features High-Speed SearchQuick Rewind a Little VHS Progressive Scan Next Function MemoryManual Tracking Soundtrack SelectionVCR recording lamp lights off on the unit Basic Recording Recording FeaturesLoad a cassette with the record safety tab intact Accidental erasure preventionRecording S.T. Picture SystemTo Record Nicam Stereo and Bilingual Programmes PlaybackPanel. Press Cancel & and input a valid PlusCode number You can use the remote control to enter the PlusCode numberPress VCR Timer # to engage the unit’s timer mode. VCR timer lamp lights up on the unit and the DVD deck isApril 22, 2004 509 pm OffRefer to steps 7 11 in Manual Timer Programming pg To cancel a programme Press Cancel & to cancel a programmePress VCR Timer # Limitations of registration Library Database DVD NaviAbout registration of information About editing of programmesModify Index When you want the pluralPress 8 to cancel pause mode after pressing Navigation Scan For Beginnings Of ProgrammesProtect Title Modify Programme NameModify Category Delete ProgrammeTo modify the points Modify Play List InformationDelete Unwanted Part Of The Programme Create Play ListAdd Scenes To a Play List Move ScenesDelete Play List Delete Unwanted Part From Play ListPlay Back Play List Delete Information Modify Library InformationScan For Programme From Library Register DiscOn completion of the playback of all the items Locating The Desired Group And TracksFor MP3 Playback For Jpeg PlaybackFor VCR deck Dubbing An Entire CassetteFor DVD deck Press VCR/DVD repeatedly so that the VCR lamp lights up on Locate the point from where you want to start dubbing, thenRecord Pause mode Prepare the VCR deck for dubbingPress and hold DUB for more than 2 seconds to start Dubbing An Entire DiscLoad a disc you want to dub Press DVD to select the dubbing directionPress and hold 9, then press 7 so that the VCR deck enters Dubbing a Part Of a Disc73 DUB MasterpageLeft+DV Dubbing DVD Deck Only Performing dubbing without using the DV Dubbing controllerEdit From a Camcorder When using your unit as the source player Compatible with the Y/C signal Output And L-1 Input SettingSelect Setting Regular video signals, set to VideoExample Dubbing to an MD Input SettingDigital Audio Dubbing 3 or 4. The remote control is preset to send 3 code signals Remote Control FunctionsTV Multi-Brand Remote Control Remote control 1/2/3/4 Code Switching65, 67, 74, 86 Satellite Receiver Multi-Brand Remote ControlSlide the TV/CABLE/SAT/DVD switch to CABLE/SAT Simple Connections Connecting To a Satellite ReceiverProgramme When you can’t switch the audio channel of a bilingualOthers pg Mode Set DVD DeckFilename DR-MV1SEK10Subsidiary.fm Utility pgThis function works only for the Nicam bilingual programme During Power Save modePower Save does not work when Lots of flat, same-coloured surfaces such as cartoons Auto Picture quality is adjusted automaticallyAccording to your preference. Normally select Auto Containing a lot of noiseAuto Channel Set Video Plus+ System SetupTuner Set Guide Program Number SetRepeat steps 4 9 as necessary Press SET UP to close the Confirmation screenManual Channel Set View the Confirmation screen. Scan Completed isSet Stations a Fine-Tuning Channels Already StoredDelete a Channel Change Station Channel PositionJust Clock function provides accurate time keeping through PDC signalScreen the default setting is OFF Clock SetFormat a DVD-RW Disc To be chosen when you want to record, erase, orFormat a Disc DVD Deck Only Format a DVD-RAM DiscFinalise a DVD-R/RW Disc Cancel The Finalisation Of a DVD-RW DiscAfter finalising For DVD-R/RW Video mode discs Finalise a Disc DVD Deck OnlyTo unlock tray Scan Mode SetTray Lock DVD Deck Only To lock trayGeneral Playback DVD DeckRecording DVD Deck TV is not set to the AV mode. Set the TV to the AV modePlayback VCR Deck Recording VCR DeckPower failure occurred Set date and time correctly. pg Timer Recording DVD DeckTimer Recording VCR Deck For RF/AV/S-VIDEO connection Other ProblemsInitialising DVD Deck Only On-screen Message DVD Deck OnlyDuring Live Memory playback, 8 has been pressed. pg Timer recording has finished during Live Memory playbackAn invalid PlusCode number has been input. pg Refers to individual chapters included in a title Glossary ENDimensions WxHxD Power requirementPower consumption TemperatureLanguage Code List Country/Area Code List for Parental Lock DR-MV1SEK00.book Page 99 Thursday, April 15, 2004 330 PM Station Name TV Station And ID ListTV Station Channel Number Guide Delete Programme Recording Mode Recording Resume FunctionSetting The Progressive Mode 26 41, 51MasterpageRight0 Memo EN104April 23, 2004 1015 am Filename DR-MV1SEK12Cov4.fm