JVC DR-MV1B Angle Selection, Checking The Time Information, Subtitle Selection, To mark positions

Filename [DR-MV1SEK_05DVD Operation1.fm]
DR-MV1SEK_00.book Page 29 Thursday, April 15, 2004 3:30 PM	Masterpage:Right+
	OPERATIONS ON DVD DECK EN 29

Marking Positions To Play Back Again Later Angle Selection

It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position. Marking onto DVD-RAM/RW/R discs when recording is helpful to locate a start point when you play back the discs later.

To mark positions:

During playback, press MARK at positions you want to mark.

●“MARK” appears on the TV screen. You can easily locate the marked positions using 2 or 6 when you play back the disc.

To delete the marked positions: While paused, press 2 or 6 to locate a marked position you want to delete, then press MARK.

●Crossed “MARK” appears on the TV screen, and the marked position is deleted.

NOTE:

When a DVD-R/RW (Video mode) disc

is finalised, marked points marked before finalising will be deleted, and programmes will be divided automatically into “chapters” approximately every 5 minutes. ( pg. 88)

Checking The Time Information

You can check time information of a disc on the front display panel and the TV screen.

Press DISPLAY once to display the lastly displayed information. To changes the display, press DISPLAY repeatedly.

8DVD-RAM/DVD-R/DVD-RW During playback or recording

Clock time (front display panel only) ] Current title elapsed time ] Disc remaining time* ] (back to the beginning)

* only discs before finalising

● Clock time is displayed only when a recordable disc is played back.

In stop mode

●It is possible to check disc remaining time according to recording modes also by pressing REMAIN.

●In FR mode, it is possible to set recording time in detail. While the recording mode and the disc remaining time are displayed by pressing REMAIN, press rt to select “FR”, then press w e to select the desired recording time. ( pg. 44)

●It is not possible to switch the recording mode during playback or while recording.

8Video CD/SVCD/Audio CD During playback or in stop mdde

Total remaining time ] Current track elapsed time ] Current track remaining time ] Total elapsed time ] (back to the beginning)

NOTE:

When a PBC-compatible Video CD/SVCD disc is loaded, deactivate the PBC function. ( pg. 30)

You can enjoy a variety of scene angles if a DVD VIDEO disc contains “multi-angle” parts, where the same scene was shot from different angles.

“” appears automatically on the TV screen at the scene where angle is selectable, while it doesn’t appear when “SUPERIMPOSE” is set to “OFF”.

If the disc contains “multi-angle” parts, “” appears on the TV screen at the beginning of the “multi-angle” part.

1Press ANGLE during playback.

The angle selection display
appears on the TV screen.	When 3 scene angles are
2 Press ANGLE or w e to select contained.
your desired angle.

●Each time you press ANGLE or w e, the angle changes.

●When “X” appears on the TV screen, the current scene is not recorded from multiple angles. In addition, some discs prohibit angle selection.

●To clear the angle selection display, press ENTER. In addition, the angle selection display disappears automatically if no operation is done for 5 seconds.

Subtitle Selection

Some DVD VIDEO discs contain more than one subtitle language, from among which you can choose the desired subtitle language. “” appears automatically on the TV screen at the scene where subtitle language is selectable, while it doesn’t appear when “SUPERIMPOSE” is set to “OFF”.

“” appears on the TV screen at the beginning of the part where more than one subtitle language are recorded.

1 Press SUBTITLE during

playback. The subtitle selection	ENGLISH
display appears on the TV screen.	When 3 subtitle languages are
● Each time you press SUBTITLE,
	contained.
the subtitle display is switched on
and off.

2 Press w e to select your desired language.

●To clear the subtitle selection display, press ENTER.

NOTES:

●When “X” appears on the TV screen, no subtitle language is recorded.

●When the subtitle language won’t be changed with the procedure above, change the subtitle on a disc menu displayed by pressing MENU.

Page 29

April 15, 2004 11:41 am