JVC DR-MV1B manual Initialising DVD Deck Only, Other Problems, On-screen Message DVD Deck Only

Filename [DR-MV1SEK_10Subsidiary.fm]
DR-MV1SEK_00.book Page 93 Thursday, April 15, 2004 3:30 PM	Masterpage:Right+

TROUBLESHOOTING EN 93

Initialising (DVD Deck Only)

Malfunction occurs on the unit.

]Press 1 to turn off the unit, press and hold 1, then press 8 for two seconds or more.

Other Problems

The image of the TV broadcast appears distorted on the TV screen.

For RF/AV/S-VIDEO connection

]Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator ( ) lights off on the front display panel.

For component video connection

]Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator () lights up on the front display panel.

Whistling or howling is heard from the TV during camcorder recording.

●The camcorder’s microphone is too close to the TV.

]Position the camcorder so its microphone is away from the TV.

●The TV’s volume is too high. ]Turn the TV’s volume down.

When scanning channels, some of them are skipped over.

●Those channels have been designated to be skipped.

]If you need the skipped channels, restore them. ( pg. 84)

The channel cannot be changed.

●Recording or Live Memory recording* is in progress.

]Press 9 to pause recording, change the channel, then press 4 to resume recording.

* DVD deck only

Channel settings that were made manually seem to have changed or disappeared.

●After the manual settings were made, Auto Channel Set was performed.

]Perform “Clock Set” ( pg. 86).

On-screen Message (DVD Deck Only)

MEMORY IS FULL

NOTHING MORE CAN BE REGISTERED IN THE LIBRARY

IF YOU DELETE UNNECESSARY TITLE INFORMATION, YOU CAN THEN REGISTER ADDITIONAL INFORMATION

●The memory is full for registration for the Navigation system. The recording cannot be started even though the capacity for the recording is enough. ( pg. 65)

AVAILABLE MEMORY IS LOW

SOON YOU WILL NO LONGER BE ABLE

TO REGISTER INFORMATION IN THE LIBRARY

IF YOU DELETE UNNECESSARY TITLE INFORMATION, YOU CAN THEN REGISTER ADDITIONAL INFORMATION

●The remaining capacity of the memory is not enough for registration for the Navigation system. The recording cannot be started even though the capacity for the recording is enough. ( pg. 65)

DISC NOT REGISTERED IN THE LIBRARY

REGISTER DISC?

●A disc that is not registered in the library has been inserted. Register the disc as necessary. ( pg. 65)

INSERT DISC #XXXX

●Appears when a title that has been selected in the library is not contained in the loaded disc.

CAN NOT RECORD OR MAKE PLAY LIST

DELETE UNWANTED TITLES

●Recording and/or editing cannot be performed with a loaded DVD-RAM disc.

●The number of titles exceeds 99.

●The number of play lists exceeds 999.

SET CLOCK BEFORE TIMER PROGRAMMING

●To set the timer programme, the clock must be set in advance. ( pg. 86)

PROGRAMME FULL

DELETE UNWANTED TIMER PROGRAMME

●You can programme this unit to timer-record as many as 8 programmes. To programme more, you need to cancel a timer programme already set. ( pg. 49)

CAN NOT SET DISC TIMER PROGRAMMING WITH THIS DISC PREPARE A FORMATTED DISC AS DESCRIBED BELOW DVD-RAM

DVD-RW (VR MODE)

●On-Disc Timer Programming has been attempted when a disc that is not compatible with the function is loaded. ( pg. 47)

NO DISC INSERTED

●On-Disc Timer Programming has been attempted when a disc is not loaded, or loaded upside down. ( pg. 10, 47)

DISC NOT RECORDABLE

INSERT RECORDABLE DISC

●When a playback-only disc or a finalised disc is loaded, 7 has been pressed. ( pg. 7)

Page 93

April 15, 2004 3:21 pm