JVC DR-MV1B Output And L-1 Input Setting, Select Setting, Regular video signals, set to Video

Filename [DR-MV1SEK_09Editing.fm]
DR-MV1SEK_00.book Page 74 Thursday, April 15, 2004 3:30 PM	Masterpage:Left+

74 EN EDITING

COMPONENT: If a connected appliance’s input is compatible with

Output/Input SetY/PB/PR signals, set to “COMPONENT”. You can obtain a high- quality Y/PB/PR picture. Switch the TV to the input that you can watch component video pictures.

●Turn on the TV and select the AV mode.

● Slide the TV/CABLE/SAT/DVD switch to DVD.			8 L-1 INPUT — VIDEO / S-VIDEO
			VIDEO: If a connected appliance’s output is compatible only with
			regular video signals, set to “VIDEO”.
VCR/DVD		SAT	S-VIDEO: If a connected appliance’s output is compatible with Y/C
1	2	3	signals, set to “S-VIDEO”. You can obtain a high-quality picture.
			(For connection, be sure to use a 21-pin SCART cable that is
4	5	6
7	8	9	compatible with the Y/C signal.)
	0		NOTES:
			● If “L-1 OUTPUT” is set to “SCART S-VIDEO”, “SCART RGB” or
ENTER		rtw e	“COMPONENT”, it is not possible to set “L-1 INPUT” to “S-VIDEO”.

SET UP	● If “L-2 SELECT” is set to “DECODER”, it is not possible to set “L-1
	INPUT” to “S-VIDEO”.
	● If “L-2 SELECT” is set to “DECODER”, it is only possible to set “L-1
	OUTPUT” to “SCART VIDEO”.
	● Component video signals are not output from the L-1 IN/OUT
	connector.
	● When Progressive scan mode is engaged, it is not possible to select
	the setting of “L-1 OUTPUT”. ( pg. 74)

L-1 Output And L-1 Input Setting

The L-1 IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set “L-1 OUTPUT” and “L-1 INPUT” to the appropriate mode depending on the type of appliance connected to the unit’s L-1 IN/OUT connector.

1 Press SET UP to access the Main Menu screen.

2 Press w e to select “FUNCTION SET UP”, then press ENTER.

3 Press w e to select “VIDEO IN/

OUT”, then press ENTER.

4 Press rt to select “L-1 OUTPUT” or “L-1 INPUT”, then press ENTER.

5 Press rt to select the appropriate setting, then press

ENTER.

6 Press SET UP to complete the setting.

NOTES: ● If “L-1 INPUT” or “L-1 OUTPUT”

is set to “S-VIDEO”, it is not

possible to output colour signals correctly from the VCR deck.

●When the progressive mode is set, be sure to set “L-1 OUTPUT” to “COMPONENT”. ( pg. 74)

●If “L-1 OUTPUT” is not set to “COMPONENT”, it is not possible to output images from the COMPONENT VIDEO OUT connector.

* The boldface settings below indicate the settings at your purchase.

8L-1 OUTPUT — SCART VIDEO / SCART S-VIDEO / SCART

RGB / COMPONENT

SCART VIDEO: If a connected appliance’s input is compatible only with regular video signals, set to “SCART VIDEO”.

SCART S-VIDEO: If a connected appliance’s input is compatible with Y/C signals, set to “SCART S-VIDEO”. You can obtain high- quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

SCART RGB: If a connected appliance’s input is compatible with RGB signals, set to “SCART RGB”. You can obtain a high-quality RGB picture.

L-2 Select Setting

Set “L-2 SELECT” to the appropriate mode depending on the type of appliance connected to the unit’s L-2 IN/DECODER connector.

1Perform steps 1 and 2 of “L-1 Output And L-1 Input Setting” on the left column.

2Press rt to select “L-2 SELECT”, then press ENTER.

3Press rt to select the

appropriate setting, then press

ENTER.

4 Press SET UP to complete the setting.

NOTES: ● If “L-2 SELECT” is set to

“S-VIDEO”, it is not possible to

output colour signals correctly from the VCR deck.

●If “L-2 SELECT” is set to “DECODER”, only the DVD deck operates properly.

* The boldface settings below indicate the settings at your purchase.

8L-2 SELECT — VIDEO / S-VIDEO / SAT VIDEO / SAT

S-VIDEO / DECODER

Select “VIDEO” or “S-VIDEO” to use this unit as the recording deck with the player connected to the L-2 IN/DECODER connector, or to use the satellite receiver connected to the L-2 IN/DECODER connector.

VIDEO: If a connected appliance’s output is compatible only with regular video signals, set to “VIDEO”.

S-VIDEO: If a connected appliance’s output is compatible with Y/C signals, set to “S-VIDEO”. You can obtain high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

Select “SAT VIDEO” or “SAT S-VIDEO” to view a satellite programme with the TV set while the unit is turned off. ( pg. 78) SAT VIDEO: If a connected satellite receiver’s output is compatible

only with regular video signals, set to “SAT VIDEO”. SAT S-VIDEO: If a connected satellite receiver’s output is

compatible with Y/C signals, set to “SAT S-VIDEO”. You can obtain a high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

DECODER: To use a decoder connected to the L-2 IN/DECODER connector.

Page 74

April 15, 2004 3:18 pm