JVC DR-MV1B This function works only for the Nicam bilingual programme, During Power Save mode

Filename [DR-MV1SEK_10Subsidiary.fm]
DR-MV1SEK_00.book Page 81 Thursday, April 15, 2004 3:30 PM	Masterpage:Right+

SUBSIDIARY SETTINGS EN 81

RECORDING SET

8SAVE AS LIBRARY — OFF / ON

When this function is set to “ON”, the recording information is automatically stored in the library. For details, refer to “Modify Library Information” ( pg. 65).

8GREY BACK — OFF / ON

When this function is set to “ON”, the TV screen becomes all grey when receiving a channel not in use.

NOTE:

When you want to receive an unstable channel with poor signals, set this function to “OFF”.

8XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM

You can select the audio format when you record a programme in XP mode. When this function is set to “LINEAR PCM”, you can obtain a high-quality audio sound.

DOLBY DIGITAL: To record in Dolby Digital format.

LINEAR PCM: To record in Linear PCM format.

8DIMMER — BRIGHT / DIM

You can change the brightness of the front display panel. BRIGHT: Normally select this.

DIM: To dim the front display panel. (Blue lamp on the front display panel is turned off.)

8AUDIO REC — NICAM 1/MAIN / NICAM 2/SUB / MONO

You can select the desired NICAM audio channel to be recorded on a DVD-R/RW (Video mode) disc.

NICAM 1/MAIN: To record the main language of NICAM audio.

NICAM 2/SUB: To record the sub language of NICAM audio.

MONO: To record the standard (monaural) sound of NICAM audio.

NOTE:

This function works only for the NICAM bilingual programme.

8DIRECT REC — OFF / ON

When this function is set to “ON”, you can easily start recording the programme that you are watching on your TV. Press and hold 7 and press 4 on the remote control, or press 7 on the unit.

NOTES:

●Recording is not possible on the VCR deck.

●When you use the Direct Rec function, be sure to use a TV offering T-V LINK, etc. and connect a fully-wired 21-pin SCART cable between the unit and the TV. ( pg. 18)

●If “DIRECT REC” is set to “OFF”, the 7 button functions as described in “Basic Recording”( pg. 42, 54).

●During Direct Rec, “– –” appears on the front display panel.

●If a programme is recorded with the Direct Rec, the station name will not be registered in the library. “– – – –” will be displayed for the station name.

●Even if there is no power supply for more than 60 minutes, the unit keeps the setting.

DISPLAY SET

8SUPERIMPOSE — OFF / AUTO

When this function is set to “AUTO”, various operational indicators appear on the TV screen. Messages appear in the selected language. ( pg. 22)

OFF: To turn off superimposed indications.

AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.

NOTES:

●Even when “SUPERIMPOSE” is set to “OFF”, you can display the various operational indicators by pressing ON SCREEN. To clear the operational indicators, press ON SCREEN again.

●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting. ( pg. 81)

●When you select “AUTO”, during playback, the operation mode indicators may be disturbed depending on the type of disc being used.

8POWER SAVE — OFF / ON

When this function is set to “ON”, you can reduce the power consumption while the unit is turned off.

NOTES:

●During Power Save mode —

—the front display panel will be turned off.

—the Just Clock function ( pg. 86) does not work.

●Power Save does not work when —

—the unit is in the Timer mode.

—the unit’s power is turned off after timer-recording or Instant Timer Recording.

—the Automatic Satellite Programme Recording mode is engaged. ( pg. 50)

—“L-2 SELECT” is set to “DECODER”, “SAT VIDEO” or “SAT S-VIDEO”. ( pg. 74)

●It takes some time for the unit to complete initialisation after you turn on unit power, with “WAKE UP” blinking on the front display panel.

OTHERS

8RESUME — ON / OFF / DISC RESUME

When this function is set to “ON” or “DISC RESUME”, you can use the resume function. ( pg. 28)

ON: You can start playback from the resume point of the placed disc.

OFF: You cannot use the resume function.

DISC RESUME: The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected.

NOTE:

“DISC RESUME” setting works on DVD VIDEO, VCD, SVCD and already finalised DVD-R/DVD-RW (video mode) discs. For other types of discs, the function under “ON” setting will be applied even if “RESUME” is set to “DISC RESUME”.

Page 81

April 15, 2004 3:21 pm