JVC DR-MV1B Clock Set, Just Clock function provides accurate time keeping through, PDC signal

Filename [DR-MV1SEK_10Subsidiary.fm]
DR-MV1SEK_00.book Page 86 Thursday, April 15, 2004 3:30 PM	Masterpage:Left+

86 EN SUBSIDIARY SETTINGS

	Clock Set	NOTES:
		● Just Clock (when set to “ON”) adjusts the unit’s built-in clock every
		hour, except for 23:00, 0:00, 1:00 and 2:00.
		● Just Clock is not effective when:
IMPORTANT:		— the unit’s power is on.
If you performed Auto Set Up ( pg. 19) or Preset Download		— the unit is in the Timer mode.
( pg. 20), without ever having set the clock previously, the		— a difference of more than 3 minutes exists between the built-in
unit’s built-in clock is also set automatically.		clock’s time and the actual time.
Perform the following steps only if —		— the unit is in the Automatic Satellite Programme Recording
— Auto Clock Set has not been performed correctly by Auto Set		mode. ( pg. 50) (DVD deck only)
Up or Preset Download.		— the unit is in the Power Save mode. ( pg. 81)
OR		— “L-2 SELECT” is set to “SAT VIDEO” or “SAT S-VIDEO”.
— you want to change Just Clock setting. ( “Just Clock” in the		( pg. 74)
right column)		● If Just Clock is set to “ON”, the unit’s clock is automatically adjusted
		at the start/end of Summer Time.
		● Just Clock may not function properly depending on the reception
● Turn on the unit.
		condition.

●Turn on the TV and select the AV mode.

● Slide the TV/CABLE/SAT/DVD switch to DVD. Just Clock

			The Just Clock function provides accurate time keeping through
VCR/DVD			automatic adjustments at regular intervals, by reading data from a
		SAT	PDC signal.
1	2	3	The Just Clock option can be set to “ON” or “OFF” at the Clock Set
			screen (the default setting is “OFF”).
4	5	6
7	8	9	IMPORTANT:
	0
			If you turn off Just Clock, the accuracy of your unit’s built-in clock may
			be reduced, which could adversely effect timer recording. We
ENTER		rtw e	recommend you to keep Just Clock on. In cases where the clock setting
			data from a PDC signal is incorrect, however, you are advised to keep

SET UP Just Clock set to “OFF”.

1 Press SET UP to access the Main Menu screen.

2 Press w e to select “INITIAL SET UP”, then press ENTER.

3 Press w e to select “CLOCK SET”, then press ENTER.

4 Press rt to select “YEAR”,

then press ENTER. Press rt to set the year, then press ENTER.

●Repeat the same procedure to set the date and time. When you set the time, press and hold rt to change the time by 30 minutes.

●When you set the date, press and hold rt to change the date by 15 days.

5 Press rt to select “JUST CLOCK”, then press ENTER. Press rt to set to the desired mode, then press ENTER.

●The default setting is “OFF”.

●For the Just clock function, refer to “Just Clock” on the right column.

●If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments.

6 Press rt to select “TV PROGRAMME”, then press ENTER. Press rt to set the channel position to the number representing the station transmitting clock setting data, then press ENTER.

●The unit is preset to receive clock setting and adjustment data from channel position 1.

7 Press SET UP to start the clock operation.

Page 86

April 15, 2004 3:21 pm