LG Electronics STB1000 manual Advanced Control Options

Picture Setup Options (Cont.)

Advanced Control

Advanced Control

1.Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the PICTURE menu option. Then, press ENTER.

2.Use the Up/Down arrows to select Advanced Control under Picture Mode, and then press

ENTER.

3.In the Advanced Control pop-up window, use the arrow keys to select and/or adjust the appropriate settings (see descriptions below).

4.When you are finished, select Close and press ENTER to close the pop-up window and return to the Picture Menu.

5.Press MENU to return to TV viewing, or press RETURN to return to the previous menu level.

PICTURE		Move	Enter
Picture Mode	: Standard
	• Backlight	90
	• Contrast	Color Temperature
		90		►
	• Brightness	Dynamic Contrast
		50
	• Sharpness	Dynamic Color
		50
	• Color	Noise Reduction
		50
		Gamma
	• Tint	0 R	G
		Black Level
	• Advanced Control
	►	Eye Care
		Real Cinema
			►
			Close

Medium

Medium ►

Low

Medium

Medium

Low

Off

Off

Advanced Control Options

•Color Temperature: A Warm setting enhances hotter colors, such as red. A Cool setting enhances cooler colors, such as blue.

•Dynamic Contrast: Enables you to adjust contrast to improve the picture by making bright parts brighter and dark parts darker. Low, Medium, or High setting options. Set to “Off” to disable this feature.

•Dynamic Color: Enables you to enhance hue, saturation, and luminance so that red, blue, green, and white colors are more vivid, lively, rich, and clear. Low or High setting options. Set to “Off” to disable this feature.

•Noise Reduction: Enables you to reduce screen noise without compro- mising video quality. Low, Medium, or High setting options. Set to “Off” to disable this feature.

•Gamma: A Low setting brightens dark and middle gray level areas of the picture, a Medium setting expresses original picture levels, and a High setting darkens dark and middle gray level areas of the picture.

•Black Level: A Low setting darkens the reflection of the screen. A High setting brightens the reflection of the screen. This feature is available in the following modes: AV (NTSC-M), HDMI, or Component.

•Eye Care: If set to “On,” this feature adjusts the brightness of the screen to dim extremely bright pictures. Eye Care is disabled in the Intelligent Sensor, Vivid, and Cinema picture modes.

•Real Cinema: If set to “On,” this feature makes video clips recorded in film look more natural by eliminating judder effect.

•Color Gamut: The Standard setting displays the standard set of colors. The Wide setting increases the number of colors used. Maximize the use of color to increase color quality.

206-4147 21