Ventilation / Mounting the STB1000

Ventilation

Monitor/STB1000 Wall Mounting System

STB1000 specifications

STB1000

Vent Holes

The STB1000 generates heat during operation and needs to be provided with adequate ventilation to assure continued reliable operation. See recommenda- tions below.

Proper clearance for air to ﬂow around the STB1000 must be provided.

Note: While accommodating STB1000 ventilation requirements, also be

sure proper ventilation is provided for the display panel. Refer to display panel installation documentation for ventilation requirements and speciﬁcations.

Note: In addition to the ventilation requirements indicated below, be sure to allow enough clearance (4 to 5 inches) for wiring clusters attached to the STB1000.

1.Ventilation holes on the top and bottom of the STB1000 are provided for ventilation cooling (see ﬁgures at right).

2.The vent holes should never be blocked or obstructed to airﬂow but have an unimpeded path through any enclosure back to room temperature air.

3.The unit and its venting, should not be installed near heat sources, such as radiators or heating ducts.

4.If the unit is placed in an enclosure, tests should be run to conﬁrm that the ambient temperature around the unit under normal expected operating condi- tions is stable and does not exceed 40 degrees Celsius (104° F). The ambient temperature can be determined by placing a thermometer near the air intake vents in the proposed enclosure and measuring the temperature every hour, under normal operating conditions, until two successive readings repeat.

If the temperature does not stabilize but keeps increasing above 40 degrees Celsius (104° F), ventilation is inadequate and needs to be improved.

5.Always provide adequate air space between the ventilation areas and adja- cent structures.

Vertical Installation (Wall Mount) Using Supplied Angled L-Brackets

Angled brackets are provided so that the STB1000 can be mounted on a ﬂat vertical surface, like a wall. Install the angled brackets with the screws provided. Then, mount the STB1000 on the wall using appropriate screws.

Note: The brackets are designed to be mounted to typical 16-inch spaced wall studs. Do not mount the STB1000 on a weak wall surface. If wall studs are not available, use another appropriate fastening system.

The display panel and STB1000 can be mounted to a wall using an optional monitor/interface STB wall mounting system. For further information on the mounting system, contact your LG dealer.

AC IN

AC OUT

IR RECEIVER	INT	PILLOW	SPEAKER	ANT	60Hz
IN		PILLOW	SPEAKER	AC 120V~	60Hz
AUDIO OUT		PILLOW		AC 120V~

STB1000

Vent Holes

	STB1000
STATUS	POWER

	STB1000
STATUS	POWER

206-4147

SERVICE ONLY

VIDEO L/MONO

The LG Electronics STB1000 is a state-of-the-art set-top box designed to enhance the viewing experience for home entertainment systems. Combining cutting-edge technology with user-friendly features, the STB1000 delivers a seamless multimedia experience. One of its standout attributes is 4K Ultra HD resolution support, offering stunning visuals with vivid colors and improved clarity. This makes it an ideal choice for anyone looking to enjoy their favorite shows, movies, or sports events in the highest quality possible.

In addition to 4K support, the STB1000 boasts HDR capabilities, which enable a greater range of brightness and contrast levels. This feature ensures that dark scenes retain detail while bright areas shine with brilliance. By utilizing HDR10 and Dolby Vision formats, LG Electronics ensures that users can experience content as it was intended by filmmakers.

The STB1000 is also equipped with advanced audio technologies, including Dolby Atmos support. This immersive sound technology creates a multi-dimensional audio experience, making it feel like the content is enveloping the viewer. Coupled with various surround sound formats, this set-top box elevates home theater setups, allowing users to enjoy cinema-quality sound from the comfort of their living rooms.

Connectivity is another highlight of the STB1000. It features multiple HDMI ports, USB connections, and Ethernet support, enabling users to easily connect a variety of devices, from gaming consoles to external storage. Additionally, built-in Wi-Fi ensures hassle-free streaming from popular platforms such as Netflix, Amazon Prime, and Hulu without the need for cumbersome wires.

The device comes with an intuitive user interface that makes navigation simple and provides quick access to favorite apps and channels. Voice control functionality adds convenience, allowing users to search for content or control playback with simple voice commands.

Moreover, the STB1000 supports popular streaming protocols, making it compatible with a wide range of smart devices. This flexibility allows users to access content across multiple platforms, enhancing the overall entertainment ecosystem.

Overall, the LG Electronics STB1000 combines advanced display and audio technologies with practical features, delivering an exceptional home entertainment experience. Whether it's movie nights, binge-watching series, or enjoying video games, the STB1000 is equipped to meet diverse multimedia needs, making it a valuable addition to any home entertainment setup.