Installer Menu
Use the Installer Menu to set up or change operational settings.
Refer to the table starting on the next page for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing.
Accessing the Installer Menu
1.Make sure the STB1000/display panel is ON.
2.Using the Installer Remote, press MENU repeatedly until the
LODGING PTC INSTALLER MENU
000 INSTALLER SEQ 000
The Installer Menu opens with item 000 INSTALLER SEQ 000.
Using the Installer Menu
Items 000 ~ 119 are accessible only upon entering the Installer Menu. Refer to the table on pages 43 and 44 for an overview of Installer Menu items, including item numbers, functions, ranges, and default values. Installer Menu items not relevant to the STB1000 are not present on the Installer Menu; therefore, some numbers are missing. For example, item 006 will not appear.
Navigation within the Installer Menu
Use the Up/Down arrow keys on the Installer Remote to sequence through the available menu items, or access an item directly by keying in the line number and then pressing MENU. For example, to access the SLEEP TIMER option, which is item 015, press
Changing Installer Menu Settings
To change an Installer Menu item setting, use the Left/Right arrow keys on the Installer Remote, or enter a value directly. Press ENTER to save the new setting, or use the Up/Down arrow keys to navigate to a new Installer Menu item if you have additional items to edit.
Exiting the Installer Menu and Activating Updates
After you have adjusted all required Installer Menu item settings, press ENTER once on the Installer Remote to save your changes; then, press ENTER again to exit the Installer Menu. Any changes you make will be stored in
UPN | ASIC 20E7 | |
PTC | V1.00.00 | STB V3.00.00 |
Typical STB1000 Installer Menu
42 |