LG Electronics manual Commercial Mode Setup for Master STB1000, Set Installer Menu items

Page 40

Commercial Mode Setup for Master STB1000

This section describes how to set up a Master STB1000 when the EBL is in Pass-through Mode.

Note: Disconnect all Aux inputs. Under certain conditions, Auto Tuning (Channel Search) is disabled if there is an Aux input active.

Note: Refer to “FTG Mode of Operation” on pages 58 to 61 for information on configuring/editing FTG Channel Map and Installer Menu settings for an individual STB1000 in FTG Mode.

1.Set Installer Menu items.

This step provides specific instruction only on the Installer Menu items that should be set on a Master TV. Refer to pages 43 to 48 for detailed information on all Installer Menu items.

a)Make sure the STB1000/display panel is ON. Then, use the Installer Remote to enter the STB1000 Installer Menu: Press MENU repeatedly until the on-screen setup menus lock up, and then press 9-8-7-6+ ENTER.

b)Set Installer Menu item 117 FACT DEFAULT to 001 and press ENTER on the Installer Remote.

This exits the Installer Menu and then clears all Installer Menu custom settings, channel labels/icons, etc. and reloads the factory default settings. The value will change back to 0 after the internal STB controller (Protocol Translator Card [PTC]) has been restored to factory default condition. This step ensures that the STB Channel Memory will be the active channel lineup.

c)Re-enter the Installer Menu as described above, and set Installer Menu item 003 BAND/AFC, as appropriate.

Broadcast: Set to 000.

CATV: Set to 001 (default).

HRC: Set to 002.

IRC: Set to 003.

d)Set any other Installer Menu items that affect your TV program- ming network to the required configuration. For example, enable/ disable Aux sources, set a Start Channel, etc.

e)After you have adjusted all required Installer Menu item settings, press ENTER once on the Installer Remote to save your changes; then, press ENTER again to exit the menu.

2.Set up display features.

On-screen setup menus control the features of the display (see pages 15 to 38). Press MENU on the Installer Remote to access the setup menus, and then set Channel, Picture, Audio, Lock, Time, etc. options to the desired configurations. See also the Clonable Menu Features list on page 50.

Note: If desired, you can run Auto Tuning (see step 3) prior to completing this step.

LODGING PTC INSTALLER MENU

 

000

INSTALLER SEQ

000

 

 

 

 

 

 

 

UPN

000-000-000-000

ASIC 20E7

 

 

PTC

V1.00.00

STB V3.00.00

 

 

Typical STB1000 Installer Menu

 

 

 

 

 

117

FACT DEFAULT

001

 

 

 

 

 

003

BAND/AFC

00X

 

Adjust the settings for these

Installer Menu items.

CHANNEL

PICTURE

AUDIO

TIME

OPTION

LOCK

INPUT

USB

Set the display features to the desired

configuration for the end user.

(Continued on next page)

40

206-4147

Image 40
Contents 206-4147 Rev a Copyright 2011, LG Electronics U.S.A., IncFor Customer Support/Service, please call Power Cord OverloadingAntenna Grounding According to NEC, ANSI/NFPA Cleaning GroundingDisconnect Device Outdoor Antenna GroundingTable of Contents Setup Checklist STB1000 Rear Panel STB1000 Rear and Front Panel OverviewSTB1000 Front Panel Reset STB1000 Jack Panel OverviewVentilation Ventilation / Mounting the STB1000Monitor/STB1000 Wall Mounting System STB1000 Jack Panel STB1000 Cabling ConnectionsSTB1000 Rear Panel IR Receiver IR Bracket STB1000 Installer Remote Installing Batteries in Installer RemoteInstaller Remote Control Typical Key Functions InputProCentric Interactive Menu Features Channel GuideInformation Remote HelpSTB1000 Setup Menus STB1000Channel Setup Options Auto Tuning Channel SearchView Digital Signal Strength Manual TuningEdit Channels / Channel Labels Channel LabelsAspect Ratio Picture Size Control Picture Setup OptionsAspect Ratio Options Preconfigured Picture Mode Options Picture ModeAdjustable Picture Mode Options Advanced Control Advanced Control OptionsRGB-PC Screen Settings Picture Reset / RGB-PC Screen SettingsScreen Resolution Screen Reset Screen Position, Size , and PhaseScreen Auto Configuration Menu Language / Audio Language Option SettingsAudio Language Turn Captions On/Off CaptionsDigital Caption Options Set ID / Demo Mode Demo ModeAudio Setup Options Auto Volume / Clear Voice II / BalanceClear Voice BalanceSound Mode Preset Sound Mode OptionsSecondary Audio Program SAP Setup TV SpeakerSet the STB Clock / STB On and Off Time Settings Time Setup OptionsSTB On and Off Time Settings Sleep Timer Lock System Overview / Enable or Disable the Lock System Lock Setup OptionsEnable or Disable the Lock System Set Password / Channel Blocking Set PasswordChannel Blocking Movie Rating / TV Rating-Children Movie Rating Mpaa for USA TV Rating-Children for USATV Rating-General TV Rating-General for USATV Rating-French for Canada Downloadable Rating / Input Block Input BlockSelect the Input Source Input SettingsInput Source Commercial Mode Setup Overview Installer MenuOverview CloningSet Installer Menu items Commercial Mode Setup for Master STB1000Set up display features Verify the STB1000 setup Run Auto Tuning Channel SearchLock the channel lineup Installer Menu Accessing the Installer MenuUsing the Installer Menu Exiting the Installer Menu and Activating UpdatesInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 073 through CH not AvbleDetailed Descriptions of Installer Menu Items Installer SequenceMute Disable Sleep TimerCaption Lock Poll RateTiming Pulse Auto CamportChksm Error Checksum Error Rear RGB EN. Rear RGB EnableYPrPb2 EN. HDMI2 Enable CH not Avble Channel Not AvailableAtsc Tune Mode Panel DelayPower Savings Atsc BandEditing/Adding Channel Icons and/or Labels To perform channel editing/labelingClonable Menu Features Cloning Overview / Clonable Menu FeaturesBefore you begin cloning Cloning Procedures Learn Setup from Master STB1000Teach Master STB1000 Setup to Target STB1000 USB Cloning NotesTLL-1100A Cloning Notes MPICable TLL-1100A Clone ProgrammerOptional Set the Clock Teach Master STB1000 Setup to Target STB1000 LT2002 Cloning Notes LT2002 CloneTo Execute ITEM, Press ON/OFF, POWER, or Enter Teach Master STB1000 Setup to Target STB1000 FTG Mode of Operation FTG Configuration OverviewSTB1000 TV-LINK CFGFTG Channel MAP Learn Configuration Utility Print MAPEDIT/ADD MAP WriteUpdate DeleteADD ExitInstaller Defaults FTG Installer Menu Configuration Utility OverviewIR Remote Access Remote Jack Pack Setup Remote Jack Pack Connections & SetupSTB Connections Digital Audio Optical Connections / Component Connections External Equipment SetupComponent Connections HDMI/DVI Connections / RGB Hookup to PC RGB Hookup to PCExternal Equipment PC RGBComposite Output from Composite ConnectionsRear Panel Checking the Software Versions Reference Upgrading STB Software using a USB Memory DeviceUpgrading TV/PTC Software Splash Screen Image File Guidelines Downloading a Splash Screen ImageRS-232 Null Configuration RS-232 Straight ConfigurationReference RS-232 Display Panel Requirements Pin Number DescriptionPanel Type Setting Monitor/Display Reference Display Panel Type SpecificationsDirect Access STB Reference STB1000 Aux Input ConfigurationReference STB1000 Camport Auto Sense Operation Camport AV in 2 Video Functionality ControlCamport Operation Stand-Alone Camport Operation FTG or PPVSTB Standby State STB Power On State Reference b-LAN Setup & OverviewLAN Power 001 Default Off RJP Model List Legacy Models Scaler Models Reference RJP Model List and Input Auto-sensing HierarchyRJP Input Auto-sensing Hierarchy Priority Video Audio Reference Programming the Installer Remote VCR Codes Reference Remote Control CodesBrand Codes DVD Codes Remote Control IR Codes Remote Control ConnectionReference IR Codes Code FunctionCode Function HexaTroubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckFTG Operation Troubleshooting Commercial Mode Check / FTG Operation TroubleshootingSymptom Possible Causes Solutions Symptom Possible Causes Possible Solutions Clone Programmer Clone Programmer TroubleshootingMaster and Target STBs Specifications Glossary of Terms Document Revision History Document Revision History / NotesDate Description February Revision a New document LG STB1000 HD Commercial Interface STB Warranty

STB1000 specifications

The LG Electronics STB1000 is a state-of-the-art set-top box designed to enhance the viewing experience for home entertainment systems. Combining cutting-edge technology with user-friendly features, the STB1000 delivers a seamless multimedia experience. One of its standout attributes is 4K Ultra HD resolution support, offering stunning visuals with vivid colors and improved clarity. This makes it an ideal choice for anyone looking to enjoy their favorite shows, movies, or sports events in the highest quality possible.

In addition to 4K support, the STB1000 boasts HDR capabilities, which enable a greater range of brightness and contrast levels. This feature ensures that dark scenes retain detail while bright areas shine with brilliance. By utilizing HDR10 and Dolby Vision formats, LG Electronics ensures that users can experience content as it was intended by filmmakers.

The STB1000 is also equipped with advanced audio technologies, including Dolby Atmos support. This immersive sound technology creates a multi-dimensional audio experience, making it feel like the content is enveloping the viewer. Coupled with various surround sound formats, this set-top box elevates home theater setups, allowing users to enjoy cinema-quality sound from the comfort of their living rooms.

Connectivity is another highlight of the STB1000. It features multiple HDMI ports, USB connections, and Ethernet support, enabling users to easily connect a variety of devices, from gaming consoles to external storage. Additionally, built-in Wi-Fi ensures hassle-free streaming from popular platforms such as Netflix, Amazon Prime, and Hulu without the need for cumbersome wires.

The device comes with an intuitive user interface that makes navigation simple and provides quick access to favorite apps and channels. Voice control functionality adds convenience, allowing users to search for content or control playback with simple voice commands.

Moreover, the STB1000 supports popular streaming protocols, making it compatible with a wide range of smart devices. This flexibility allows users to access content across multiple platforms, enhancing the overall entertainment ecosystem.

Overall, the LG Electronics STB1000 combines advanced display and audio technologies with practical features, delivering an exceptional home entertainment experience. Whether it's movie nights, binge-watching series, or enjoying video games, the STB1000 is equipped to meet diverse multimedia needs, making it a valuable addition to any home entertainment setup.