Avaya S8710 manual Soc/Ren

Page 3

One or more of the following Mexican national standards, as applicable: NOM 001 SCFI 1993, NOM SCFI 016 1993, NOM 019 SCFI 1998.

The equipment described in this document may contain Class 1 LASER Device(s). These devices comply with the following standards:

•EN 60825-1, Edition 1.1, 1998-01

•21 CFR 1040.10 and CFR 1040.11.

The LASER devices used in Avaya equipment typically operate within the following parameters:

Typical Center Wavelength

Maximum Output Power

830 nm - 860 nm

-1.5 dBm

 

 

1270 nm - 1360 nm

-3.0 dBm

 

 

1540 nm - 1570 nm

5.0 dBm

Luokan 1 Laserlaite Klass 1 Laser Apparat

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposures. Contact your Avaya representative for more laser product information.

Electromagnetic Compatibility (EMC) Standards

This product complies with and conforms to the following international EMC standards and all relevant national deviations: Limits and Methods of Measurement of Radio Interference of Information Technology Equipment, CISPR 22:1997 and EN55022:1998.

Information Technology Equipment – Immunity Characteristics – Limits and Methods of Measurement, CISPR 24:1997 and EN55024:1998, including:

•Electrostatic Discharge (ESD) IEC 61000-4-2

•Radiated Immunity IEC 61000-4-3

•Electrical Fast Transient IEC 61000-4-4

•Lightning Effects IEC 61000-4-5

•Conducted Immunity IEC 61000-4-6

•Mains Frequency Magnetic Field IEC 61000-4-8

•Voltage Dips and Variations IEC 61000-4-11

Power Line Emissions, IEC 61000-3-2: Electromagnetic compatibility

(EMC) – Part 3-2: Limits – Limits for harmonic current emissions.

Power Line Emissions, IEC 61000-3-3: Electromagnetic compatibility

(EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems.

Federal Communications Commission Statement

Part 15:

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Part 68: Answer-Supervision Signaling

Allowing this equipment to be operated in a manner that does not provide proper answer-supervision signaling is in violation of Part 68 rules. This equipment returns answer-supervision signals to the public switched network when:

•answered by the called station,

•answered by the attendant, or

•routed to a recorded announcement that can be administered by the customer premises equipment (CPE) user.

This equipment returns answer-supervision signals on all direct inward dialed (DID) calls forwarded back to the public switched telephone network. Permissible exceptions are:

•A call is unanswered.

•A busy tone is received.

•A reorder tone is received.

Avaya attests that this registered equipment is capable of providing users access to interstate providers of operator services through the use of access codes. Modification of this equipment by call aggregators to block access dialing codes is a violation of the Telephone Operator Consumers Act of 1990.

REN Number

For MCC1, SCC1, CMC1, G600, and G650 Media Gateways:

This equipment complies with Part 68 of the FCC rules. On either the rear or inside the front cover of this equipment is a label that contains, among other information, the FCC registration number, and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.

For G350 and G700 Media Gateways:

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. The digits represented by ## are the ringer equivalence number (REN) without a decimal point (for example, 03 is a REN of 0.3). If requested, this number must be provided to the telephone company.

For all media gateways:

The REN is used to determine the quantity of devices that may be connected to the telephone line. Excessive RENs on the telephone line may result in devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed 5.0. To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. REN is not required for some types of analog or digital facilities.

Means of Connection

Connection of this equipment to the telephone network is shown in the following tables.

For MCC1, SCC1, CMC1, G600, and G650 Media Gateways:

Manufacturer’s Port

FIC Code

SOC/REN/

Network

Identifier

 

A.S. Code

Jacks

 

 

 

 

Off premises station

OL13C

9.0F

RJ2GX,

 

 

 

RJ21X,

 

 

 

RJ11C

 

 

 

 

DID trunk

02RV2-T

0.0B

RJ2GX,

 

 

 

RJ21X

 

 

 

 

CO trunk

02GS2

0.3A

RJ21X

 

 

 

 

 

02LS2

0.3A

RJ21X

 

 

 

 

Tie trunk

TL31M

9.0F

RJ2GX

 

 

 

 

Basic Rate Interface

02IS5

6.0F, 6.0Y

RJ49C

 

 

 

 

1.544 digital interface

04DU9-BN

6.0F

RJ48C,

 

 

 

RJ48M

 

 

 

 

 

04DU9-IKN

6.0F

RJ48C,

 

 

 

RJ48M

 

 

 

 

 

04DU9-ISN

6.0F

RJ48C,

 

 

 

RJ48M

 

 

 

 

120A4 channel service unit

04DU9-DN

6.0Y

RJ48C

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 6HUYHU Copyright 2004, Avaya Inc All Rights Reserved SOC/REN Installation and Repairs Contents Configuring the hardware in the rack Connecting to the IPSIs Accessing the media server Using this documentation About This DocumentationAudience Terminology Physical dimensionsConventions GeneralCommands Downloading this documentation Downloading this book and updates from the WebRelated resources Safety labels and security alert labelsWithin the US Technical assistanceTrademarks Sending us commentsIntroduction Before you go on site Pre-installation informationDownloading license and Avaya authentication files Before you start the installation Equipment specificationsEquipment specifications Required hardware Documentation Connecting to the customer’s network Figure notes Connecting the USB modems Connecting to collocated serversConnecting to separated servers High level overview of installation process Testing the complete installation Completing the installation administrationConfiguring the hardware in the rack Configuring the Snmp modules in the UPS Security Alert Setting selected traps alarming Single control networkDuplicated control network Page Use the command set spanning disable Clearing the ARP cache on the laptop Configuring the media serverPowering up the media server Accessing the media serverSetting up Telnet Installing Avaya Communication Manager Using the Installation Wizard Click Launch Avaya Installation Wizard Click Execute Ping Configuring the modem Disconnecting from the media server Testing the media server LEDsRemastering the hard drive Configuring second media serverJune Starting terminal emulation Translating the IPSIsResetting the media server Inputing translationsAdding media gateways Adding Ipsi information Administering the IPSIsTranslating the IPSIs Administering the IPSIs S8700/S8710 MC Enabling Ipsi duplication duplicated control network onlyInstalling the translation file Setting alarm activation levelConnecting to the IPSIs Programming the Ipsi circuit packs Using Dhcp addressingSetting the switch ID Using static addressingConnecting directly to the Ipsi Type show control interface and press Enter LED display showing that the Ipsi has a static IP address Verifying that IPSIs are translatedVerifying connectivity to media server Upgrading Ipsi firmware version if necessaryEnabling control of IPSIs Verifying license status Reusing a TN2312AP/BP circuit packVerifying translations Completing the installation administrationType change daylight-savings-rules and press Enter Setting daylight savings time rulesVerifying date and time Setting locations if necessaryEnabling and disabling Ethernet switch ports Resolving alarmsBacking up files to the compact flash media S8710 only June Placing the flashcard in the media server Backing up files to the Pcmcia flashcard S8700 onlyJune To Inads via Snmp Enabling alarmsTelneting to media server To Inads via modemRegistering the system Installing the media gateways June Testing the TN2312BP Ipsi circuit pack Testing the media server installationSample Ipsi 01A test results screen-page Testing the license fileS8700 Media Server LEDs LED indicatorsTesting the media server LEDs Interpreting the test results Disc S8710 Media Server LEDsLEDs on back panel of S8710 Media Server LEDs on Avaya P333T Ethernet switch Avaya Ethernet switch LEDsIpsi LEDs Uninterruptible power supply LEDsTN2312BP circuit pack faceplate LED display on the Ipsi circuit pack-static address LED display indicating connectivity status-DHCP address Connecting to the media server directly Accessing the media serverCadlsrvr KLC Cadlsrv2 KLC Connecting to the media server remotely over the network Connecting to the media server remotely over a modemSetting up a dial-up connection Accessing the Maintenance Web Interface Dialing up to the media serverFinding the active media server IP address Logins Using the command line interfaceNetwork configuration Browser settings Connecting directly to the media serverConnecting remotely through the network Installing the media server hardware Troubleshooting an installationDhcp Configuring the media server hardwareInstalling the license and Avaya authentication files Troubleshooting an installation Index IndexJune Using Dhcp IP address, 50 using this documentation June

S8710 specifications

The Avaya S8710 is a robust and scalable communication platform designed to cater to the needs of medium to large enterprises. As a part of Avaya's portfolio, this solution is built to provide enhanced call control, unified communications, and superior customer service, all while ensuring flexibility and reliability.

One of its standout features is its support for VoIP (Voice over Internet Protocol), which allows businesses to leverage their existing data networks for voice communications. This feature not only reduces costs associated with traditional telephony but also ensures higher quality calls and advanced functionalities. It integrates seamlessly with various telecommunications technologies, making it an essential tool for modern enterprises.

The S8710's architecture is highly modular, allowing businesses to scale their operations easily. This modularity enables organizations to start with a basic configuration and expand as their needs grow. The system can support thousands of voice channels, making it ideal for large organizations with high call volumes.

Another significant characteristic of the Avaya S8710 is its support for a variety of endpoints, including traditional digital phones, analog devices, and advanced IP phones. This flexibility allows enterprises to implement a mix of old and new technologies as they transition to a more modern communication infrastructure. Additionally, the platform offers advanced features such as integrated conferencing, automatic call distribution, call prioritization, and intelligent call routing, enhancing the overall customer experience.

The S8710 also supports various deployment options including premise-based, cloud-based, or hybrid setups, providing organizations with the capacity to choose the model that best fits their operational needs. The system’s reliability is further strengthened by its built-in redundancy and failover capabilities, ensuring minimal disruptions during service outages.

For further enhancements, the Avaya S8710 integrates with Avaya's unified communications solutions, allowing for the convergence of voice, video, and data services. This integration facilitates better collaboration among teams, improved decision-making processes, and higher productivity levels.

In summary, the Avaya S8710 offers a comprehensive, adaptable communication solution for businesses looking to modernize their telecommunications infrastructure. Its rich set of features, robust technologies, and flexible deployment options make it a premier choice for organizations aiming for operational efficiency and enhanced customer engagement.
Top Page Image Contents