Configuring second media server
Configuring second media server
The procedures for this installation are the same as for configuring the first media server. Repeat tasks Clearing the ARP cache on the laptop on page 33 through Disconnecting from the media server on page 40 for the second media server.
Remastering the hard drive
CAUTION:
This task is not part of the ordinary configuration process and erases any information on the drive. Do not perform this task unless you are updating from a release prior to Release 2.1 of Avaya Communication Manager.
NOTE:
This step upgrades the server, loading the RP software onto the backup partition. The currently running release remains on the other partition, just as it always does during an upgrade.
1Insert the CD containing the software into the
2Under Server Configuration and Upgrades, click Install New Software Release.
3Select from the menu the file from the CD
On the page asking about installing the license file, select either statement and click Continue. The license file is replaced later in the upgrade process.
On the page asking about installing the Avaya authentication files, select Do not update authentication information and click Continue.
4Select Reboot when you get to that Web page.
After the system reboots, which takes about 3 minutes, the RP software redirects the system to boot from the
5Close the browser.
Installing and Configuring the Avaya S8700 or S8710 Media Server | 41 |
June 2004 |
|