Avaya S8710 manual Translating the IPSIs, Starting terminal emulation

Translating the IPSIs 3

Starting terminal emulation

3 Translating the IPSIs

These steps are done by issuing SAT commands on a terminal emulation program such as Avaya Native Configuration Manager, Avaya Terminal Emulation, or HyperTerminal. You also can use Avaya Site Administration, part of the Avaya Integrated Management suite, which you can purchase from Avaya.

NOTE:

You must use Release 1.11 or a later version of Avaya Site Administration, to administer new features in Release 2.1 of Avaya Communication Manager.

NOTE:

For SAT commands you must be on the active media server.

Perform these tasks to customize the media server:

•Starting terminal emulation on page 43

•Inputing translations on page 44

•Resetting the media server on page 44

•Adding media gateways on page 44

•Administering the IPSIs on page 45

Starting terminal emulation

NOTE:

Avaya Native Configuration Manager, Avaya Terminal Emulation, and HyperTerminal are supported terminal emulation applications.

1On the services laptop, open a VT-100 terminal emulation session.

2Administer the terminal emulation port settings:

•9600 baud

•No parity

•8 data bits

•1 stop bit

•No flow control

•5023 for the port

3Log into the media server as craft.

Installing and Configuring the Avaya S8700 or S8710 Media Server	43
June 2004