Completing the installation administration 5
Verifying translations
5 Completing the installation administration
This section covers the following tasks:
•Verifying translations on page 57
•Setting daylight savings time rules on page 58
•Setting locations (if necessary) on page 59
•Verifying date and time on page 59
•Resolving alarms on page 60
•Enabling and disabling Ethernet switch ports on page 60
•Backing up files to the compact flash media (S8710 only) on page 61
•Backing up files to the PCMCIA flashcard (S8700 only) on page 63
•Telneting to media server on page 65
•Enabling alarms on page 65
•Registering the system on page 66
Verifying translations
1Type list configuration all and press Enter to view all the administered circuit packs in the system.
2Type list ipsi and press Enter to verify the location of the IPSI circuit packs.
3Check the administration status on the following items:
•list station
•
•
list
list
NOTE:
Even though you set the date, time, and time zone through the Web interface on the media server, you also must set the daylight savings time rules and locations and verify the date and time through SAT commands.
Installing and Configuring the Avaya S8700 or S8710 Media Server | 57 |
June 2004 |
|