Toshiba 14AF46C, 20AF46C appendix Adding channels to the TV’s memory, Changing channels

ADJUST

SELECT

CABLE START ADD ERASE

PICTURE AUDIO

TV / CABLE CH PROGRAM ADD / ERASE

CH

SETUP OPTION

Adding channels to the TV’s memory

Your TV will stop on specific channels that are stored in the TV’s channel memory when you press Channel + or –. Use the steps below to set all active channels in your area automatically.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase specific channels manually.

To add channels automatically:

1.Press MENU, then press a or b to display the SETUP menu.

2.Press c or d until the TV/CABLE selection is highlighted.

3. Press a or b to highlight either TV		CH
	PICTURE AUDIO	SETUP OPTION
or CABLE, depending on which
			TV
you use.	TV / CABLE			CABLE
	CH PROGRAM		START
If you use an antenna, choose TV.	ADD / ERASE		ADD
If you use cable, choose CABLE.	SELECT		ADJUST

4.Press d to select CH PROGRAM.

5.Press a or b to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.

While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

6.When channel programming is complete, the message “COMPLETED” appears.

7.Press CH + or – to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1. Select the channel you want to add or erase.

If adding channels, you must select the channel to add using the Channel Number buttons.

2. Press MENU, then press a or b to

display the SETUP menu. 3. Press c or d to highlight ADD/

ERASE.

4. Press a or b to select ADD or ERASE, whichever function you

want to perform.

5.Repeat steps 1–4 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:

Press Channel ▲ or ▼ on the TV or CH + or – on the remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100) on the remote control.

For example, to select channel 125, press 100, 2, 5.

13

Channel

Numbers

Channel +/–

c d a b

Menu

Safeguards

Toshiba

your TV

Remote Control

your TV

Features

Important

Welcome to

Connecting

Using the

Setting up

Using the

TV’s

Appendix

J3S00721A(E)_P07-13 13 26/12/05, 2:16 PM