Toshiba 20AF46C, 14AF46C appendix Locking channels, To change your PIN code, To lock channels

16

EXIT

SET

ENTER

4.Use the Channel Number buttons (0–9) to enter your PIN code. If you are accessing the LOCK menus for the first time, select a four-digit number to be your PIN code. Press ENTER. The BLOCKING menu appears.

	CH
PICTURE AUDIO	SETUP OPTION
LOCK
CH LOCK	START
VIDEO LOCK	OFF
GAME TIMER	OFF
NEW PIN CODE	START
SELECT	ADJUST

5.You may now enable blocking. See “Locking channels” (below), “To change your PIN code” (below), “Locking video input” (page 17), or “Setting the GameTimerTM” (page 17) .

To change your PIN code:

1.Press MENU, then press a or b to display the OPTION menu.

2.Press c or d to highlight LOCK.

3.Press a or b to display the BLOCKING menu.

4.Use the Channel Number buttons (0–9) to enter your PIN code. Press ENTER. The BLOCKING menu appears.

5.Press c or d to highlight NEW PIN CODE and press a or b to display the NEW PIN CODE menu.

6.Use the Channel Number buttons (0–9) to enter a new code. Press ENTER.

7.Press EXIT to return to normal viewing.

Note:

If you forget your PIN code, press RECALL four times within five seconds from the BLOCKING menu. The PIN code will be released (BLOCKING RESET status restored).

Channel

Numbers

Recall

c d a b

Exit

Menu/

Enter

Using the TV’s Features

Locking channels

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.

To lock channels:
1.	Use the Channel Number buttons (0–9, 100) to display the
	television channel you wish to lock.					Channel
2.	Press MENU, then press a or b to display the OPTION menu.
						Numbers
3.	Press c or d to highlight LOCK.
4.	Press a or b to display the LOCK menu.
5.	Use the Channel Number buttons (0–9) to enter your PIN code,
	then press ENTER. The LOCK menu
	appears.		CH			c d a b
6.	Press c or d to highlight CH LOCK
		PICTURE AUDIO	SETUP	OPTION
	and press a or b to display the CH
		LOCK
	LOCK menu.
		CH LOCK	START
7.	Press a or b to select the following:	VIDEO LOCK	OFF
		GAME TIMER	OFF
	• SET– to set the channel as one to be					Exit
		NEW PIN CODE	START
	locked. Then press ENTER.	SELECT	ADJUST			Menu/
	• CLEAR– to clear all channels from					Enter
	the list of locked channels.
	Then press ENTER.		CH
8.	Repeat steps 1 through 7 to lock other	PICTURE AUDIO	SETUP	OPTION
						Note:
	channels. When you are finished	CH LOCK : CH 12
	locking channels, press EXIT to return	SET/CLEAR	SET CLEAR			After programming CH LOCK, change
		LOCKED CH	0	0	0
	to normal viewing.		0	0	0	channels before turning off the television.
		TV CABLE	0	0	0

If you try to tune a locked channel, the	SELECT
	END
TV will not display it, but will display the
nearest unlocked channel.

J3S00721A(E)_P14-22 16 26/12/05, 2:17 PM