Sony BKDF-711, 702P Editor and GPI buttons, Fade-to-black and DSK section, Menu control section

DFS-700/700P

Chapter 2 Location and Function of

Parts and Controls

Control Panel

5 PATTERN/KEY PAD buttons			Changing labels
These function as shown in the following table,			You can change the labels on the buttons, using the
according to the selected mode.			supplied labels.
			For details of how to change the labels, see page A-63.
		Functions of the PATTERN/KEY PAD buttons
Button				Mode
	DIRECT	PATTERN	TRANS	USER PGM	SNAP SHOT	DIRECT RECALL
	PATTERN
0 to 9	Select the	Set the pattern	Set the	–	Specify a	Recall one of
	pattern shown	number.	transition time.		snapshot	snapshots 0 to 9.
	on the button.a)				number.
LAST X/INS	–	–	–	Add a key	Return to the	Return to the state
				frame.	state before	before recalling a
					recalling a	snapshot. (Press
					snapshot.	LAST X while
					(Press LAST X	holding down the
					while holding	ENTER button.)
					down the
					ENTER button.)
DEL	–	Delete the last	Delete the last	Delete a key	Delete the last	–
		character	character	frame.	character
		entered.	entered.		entered.
P IN P/RST	Select the	Reset the input	Reset the input	Initialize the	Reset the input	–
	pattern shown	value.	value.	parameters.	value.
	on the button.a)
UP	Increment the	Increment the	Increment the	Increment the	Increment the	Increment the
	pattern number.	pattern number.	transition time	key frame	snapshot	snapshot number.
			by one frame.	number.	number.
DOWN	Decrement the	Decrement the	Decrement the	Decrement the	Decrement the	Decrement the
	pattern number.	pattern number.	transition time	key frame	snapshot	snapshot number.
			by one frame.	number.	number.
ENTER	–	Confirm the	Confirm the	Change the key	Confirm the	Return to the state
		input value.	input value.	frame.	input value.	before recalling a
						snapshot. (Press
						LAST X while

holding down the ENTER button.)

3DSK (downstream keyer) button Press this button, turning it on, to insert the downstream key set by the DSK section buttons in the menu control section into the program output video. By pressing the SET button in the effect transition section, you can set the downstream key transition time.

6EDITOR and GPI buttons

1 EDITOR button

EDITOR

2GPI button

GPI

1EDITOR button

Press this button, turning it on, to accept control from an external editor connected to the EDITOR connector on the rear panel of the processor unit.

Press this button once again to turn it off; control is no longer accepted from the external editor.

2GPI button

Press this button, turning it on, to accept GPI signals input to the GPI/T 1 and 2 connectors on the rear panel of the processor unit.

Press this button once again to turn it off; GPI signals are no longer accepted.

2 DSK section

1 TITLE 2 DSK EDGE

		LUM	LUM	LUM	TRAIL
					SHADOW
1 TITLE section
		CRK	CRK	BORDER	BEVELD	3 EDGE
					EDGE	section
6 SET UP
button	SET UP	MASK	MASK	MASK	SOFT

5 SHIFT
button	SHIFT	CCR LIGHTING MATTES BORDER

4 CCR, LIGHTING, and MATTES buttons

1TITLE section

The title key function allows you to superimpose characters or graphics by cutting out part of the foreground video with a key source signal, and applying the effect to the background video.

There are two ways of using the key source signal: as a luminance key depending only on image intensity, or as a chroma key, based on a particular color.

Using the buttons in columns 1 and 2 of the TITLE section, you can insert two title keys (TITLE 2 requires the optional BKDF-711 board to be installed). To insert a title key, press the TITLE button in the effect transition section.

The TITLE 1 and TITLE 2 buttons include the following.

CRK (chroma key) button: Press this to use a chroma key to cut out the image. When pressed,

Chapter 2 Location and Function of Parts and Controls

–: Not used

a) For the pattern allocation, see pages 3-18 to 3-20.

5Fade-to-black and DSK section

1 DSK PVW button

DSK PVW

FADE

2 FADE TO BLACK button TO

BLACK

3 DSK button DSK

1DSK PVW (downstream keyer preview) button When this button is pressed, turning it on, the program output video is output from the preview output connectors with the downstream key inserted.

2FADE TO BLACK button

Press this button, turning it on, to change the entire program output video to a preset color (factory default: black). To set the color, press the MATTES button in the menu control section, and display the setting menu in the effect control section ((F1) SELECT-FTB).

By pressing the SET button in the effect transition section, you can set the fade-to-black transition time.

7Menu control section

For various effect settings, you press a particular button in the menu control section, to display a setting menu in the effect control section. Some buttons toggle on and off when pressed: in this case the corresponding effect is disabled when the button is off.

Displaying the menu for a button already lit Hold down the SHIFT button and press the button again. This leaves the button lit (and the effect enabled), while bringing up the menu in the effect control section. For the LUM and CRK buttons in the TITLE section, it is not necessary to hold down the SHIFT button.

this button lights, and portions of the foreground image of the designated color are cut out as the key source signal. When this button is lit, the LUM button is off.

You can carry out chroma keying simply, using the auto chroma key function.

LUM (luminance) button: Press this to use a luminance key to cut out the image. When pressed, this button lights, and portions of the foreground image are cut out based on the luminance level. When this button is lit, the CRK button is off.

1-9

2-6 Chapter 2 Location and Function of Parts and Controls

Chapter 2 Location and Function of Parts and Controls 2-7