POWER UP
(Applies to 27X and 35X models only.)
POWER UP ACTION
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS> ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA> <MOTION>
<AUTO TRACKING> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>
BACK
EXIT
POWER UP
POWER UP ACTION
BACK
EXIT
This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled.
The following settings are available:
NONE: No action.
AUTO (default): The dome resumes its prior activity or direction before the power outage occurred.
PRESET 1: Dome goes to preset 1.
PRESET 2: Dome goes to preset 2.
PRESET 3: Dome goes to preset 3.
PRESET 4: Dome goes to preset 4.
PRESET 5: Dome goes to preset 5.
PRESET 6: Dome goes to preset 6.
PRESET 7: Dome goes to preset 7.
PRESET 8: Dome goes to preset 8.
AUTO SCAN: Dome starts auto scan operation.
FRAME SCAN: Dome starts frame scan operation.
RANDOM SCAN: Dome starts random scan operation.
PATTERN 1: Dome runs pattern 1.
PATTERN 2: Dome runs pattern 2.
PATTERN 3: Dome runs pattern 3.
PATTERN 4: Dome runs pattern 4.
PATTERN 5: Dome runs pattern 5.
PATTERN 6: Dome runs pattern 6.
PATTERN 7: Dome runs pattern 7.
PATTERN 8: Dome runs pattern 8.
(Only 27X and 35X models allow PATTERN 2 through PATTERN 8.)
*This setting applies to Pressurized Spectra IV dome systems only.
33 |