Pelco C3463M-B Preset 83 to 87 Reserved, Preset 92 to 93 Scan limit stops Preset 94 Reserved

Page 35

The Spectra IV SL dome system, which includes 23X models, has 64 preset positions. The presets that can be configured are numbered 1 to 32 and 35 to 64.

The Spectra IV SE dome system, which includes 27X and 35X models, has 256 preset positions. The presets that can be configured are numbered 1 to 32, 35 to 82, and 100 to 256.

NOTE: The number of available presets may be limited by the head-ins, controllers, and DVRs that are connected to your dome system.

Each of the user-definable presets can be configured to use pan, tilt, camera settings, and motion detection.

The following presets are predefined for specific functions:

Preset 33: Flip command; pans the dome drive 180 degrees

Preset 34: Pan zero command; directs the dome drive to the factory-determined zero reference point

Preset 83 to 87: Reserved

Preset 88: IR filter IN (color)

Preset 89: IR filter OUT (black-white)

Preset 90 to 91: Manual limit stops

Preset 92 to 93: Scan limit stops

Preset 94: Reserved

Preset 95: Select main configuration menu

Preset 96: Stop a scan

Preset 97: Random scanning

Preset 98: Frame scanning

Preset 99: Start auto scanning

NOTE: For American Dynamics™ controllers with only 32 presets, switch SW2-1 on the dome drive to the ON position. When SW2-1 is ON, several presets change (refer to Table D).

Table D. Presets for American Dynamics Controllers

	Spectra IV Presets	American Dynamics
	Spectra IV Presets	Controller Presets
		Controller Presets

	88	21

	89	22

	90	23

	91	24

	92	25

	93	26

	95	28

	96	29

	97	30

	98	31

	99	32

If the limit stops are turned off, presets 23 to 26 can be used as regular presets.

C3463M-B (2/11)

35

Image 35

Contents Spectra IV SL and Spectra IV SE Series Page Contents Field Align Page Description Switch Settings InstallationSW2 Switches 6 to 8 Baud Settings SW2 Switches 4 and 5 Serial Port SettingsAddress Dome DriveQuick Operation Guide Quick Configuration GuideOperation Extended Coaxitron or RS-485 Mode Preset 95 Accessing Main MenuDigital Sentry DS Controlpoint Endura WorkstationDigital Sentry System Software 23X LowLight Day/Night Menu Tree Password Edit the Password Dome SettingsLine Sync Presets AlarmsPatterns Zones Alert Current Reading Clear Password27X LowLight Day/Night Menu Tree Label PositionEvent Edit Event Power UP Line Sync Presets Motion Detection35X LowLight Day/Night Menu Tree Azimuth Elevation Zoom Custom Camera Settings Spectra Language Reset Camera Cycle Camera Power Reboot System ExitLanguage System Information DIP Switch InformationRestore Factory Defaults Back Exit Display SetupExit Display Setup Preset Label Alert Message Title Text Save and Exit Cancel HelpLabel Positions EventAuto Focus Dome SettingsCamera Type of LightingPT Focus Lock Zoom LimitZoom Speed LOW Light LimitLow Light Focus IR CUT FilterAuto IR Level Auto Iris Advanced Camera SettingsShutter Speed AGC LimitElectronic Image Stabilization Auto SharpnessAuto White Balance Backlight CompensationField Align OFF Low lux noise reduction is disabledLOW LUX Noise Reduction Video LevelAuto Flip Motion SettingsLOW Light Sharpness Minimum Focus DistanceLimit Stops Preset Freeze FramePark Time Scan SpeedAuto Tracking Power UP Start Time Line Sync Zoom Presets Lost ActionAuto Tracking Azimuth ZeroZoom Display SetupSensitivity Start TimeBack Exit Power UP Power UP Action Power UPPower UP Action Back Exit Presets Preset Number PresetsTable C. Stored Presets by Back Box Model Back Exit Line Sync Line Sync PhasePreset 96 Stop a scan Preset 83 to 87 ReservedPreset 92 to 93 Scan limit stops Preset 94 Reserved Preset 95 Select main configuration menuSpace Label for Preset Preset NumberAbcdefghij Cancel Klmnopqrst Uvwxyz Edit Detection Areas Enable Motion DetectionMotion Detection Aux Time Activate Aux CommandEdit Schedule Back Exit PatternsBack Exit Patterns Clear Zone Back Exit ZonesBack Exit Zones Zone Number Edit Zone LabelTo set a window blanking area Enable Window Reverse Clear Window Back ExitWindow Blanking Clear Window DisabledReverse Blanked Area Blank ALL ABOVE/BLANK ALL belowBlank All Above Blank All Below Alarms C3463M-B 2/11 Dwell Time Secs Edit Schedule Back Exit Back Exit AUX AUX 1 Mode Toggle Dwell Time Secs AUX 2 ModeAUX Edit Title Text Title TextBack Exit Title Text System Condition Alert Message AlertRepeat ACK ActionCurrent Reading Reset AlertNone default Not activated Activate AUXBack Abcdefghij Cancel Klmnopqrst Exit Uvwxyz PasswordBack Exit Password Enable Password Edit PasswordClock Follow the instructions in for Fixed DATE, adding Week Holiday EventEvent Type Back Exit Event Event Type Event LabelEdit Event Event LabelEdit Event Label Edit Holiday Clear EventList Event HolidayMonth January DAY Back Exit Clear HolidayList Holidays Edit Holiday OccurrenceUse this page to record scheduled events Example Preset Weekend 1100 AM Sat-SunScheduled Events Reboot System Reset, Cycle Power, RebootReset Camera Cycle Camera PowerSoftware/Language File Upload Maintenance Zoom Speed 4.2/5.8 seconds Horizontal Angle of View SpecificationsSignal Format 23X ModelsDD427 27X ModelsDD4CBW35 35X ModelsAppendix Table F. Switch Settings for SW1 Pelco P-Type ControlSpectra Switch Setting Address Table G. Switch Settings for SW1 Pelco D-Type Control 1Table G. Switch Settings for SW1 Pelco D-Type Control 2 Table G. Switch Settings for SW1 Pelco D-Type Control 3 Table G. Switch Settings for SW1 Pelco D-Type Control 4 Table G. Switch Settings for SW1 Pelco D-Type Control 5 Table G. Switch Settings for SW1 Pelco D-Type Control 6 Product Warranty and Return Information