Oregon Scientific DS6639 user manual Connecting to External Devices, Connecting to a TV

ENGLISH

Slideshow Options

Settings	Descriptions
Start	Start Slideshow according to
	the specified Interval and
	Repeat options.
Interval	Specifies the amount of time
	the camera will display an image
	before moving on to the next
	image. The options are 3 sec.,
	5 sec., and 10 sec.
Repeat	When set to On, the slideshow
	immediately replays when the
	final image is displayed.

Slide

Start

Interval5s

RepeatOff

MENU Exit OK

An optional cradle with mini USB connector can be used with this product. Please contact your local distributor for more details about this option.

Pre-Installation Checklist

•	Pentium 166MHz	• 16-bit colour display at 800x600
•	64MBytes RAM	•	USB 1.1 interface
• 350MBytes Hard disk space		•	Windows 98/98SE/ME/2000/XP

•CD-ROM drive

Installing Drivers and Software

1.Insert the CD labelled “DS6639” into your CD-ROM drive. The installation will start automatically.

If the “autorun” feature is disabled on your PC, start the installation by running [x:\setup.exe] where “x:” is the drive letter of the CD-ROM drive.

FRANÇAIS ENGLISH

CONNECTING TO EXTERNAL DEVICES

CONNECTING TO A TV

You can playback the images and movies you have recorded on your TV. Connect your digital camera to the TV via the video cable included in the camera’s gift box.

Be sure to adjust the TV Out setting ( p.13) to correspond with your country’s system (PAL or NTSC) before connecting the camera to the TV.

Caution: Turn off the TV and digital camera before connecting the video cable.

1.Plug the video cable into the Video Socket of the camera ( p.3).

2.Connect the video cable’s yellow connector to the yellow AV input terminal of your TV. Refer to your TV’s manual for more information.

3.Turn the TV and camera on. Make sure to switch the TV to the appropriate AV channel display.

The OSD is automatically off when the camera is connected to a TV.

CONNECTING TO A WINDOWS-BASED PC

Use the USB cable included to connect to your Windows PC. This enables you to upload, download, edit, and playback pictures and movies onto your PC. However, the software must be installed first.

26

2.Follow the on-screen instruction to complete the installation of the camera drivers and software. When done, click on the [Finish] button on-screen to restart the PC.

Connecting the Camera to the PC

Only the images and movies stored in the camera’s current memory device (SD card or internal memory) will be visible on the PC.

The OSD is automatically off when the camera is connected to the PC.

1.Turn on your PC and allow your system’s Windows operating system to boot up.

2.Turn off your digital camera. Connect the camera and your PC via the USB cable. Refer to your PC’s manual to locate the USB connection on the PC.

3.Turn on your digital camera to any Mode. The device’s Status Lamp will blink. The camera will then appear as Removable Disk drive on your system’s [My Computer].

4.Double-click on the [Removable Disk] drive. Two folders, [DCIM] and [MISC], are now visible. Ignore the [MISC] file (it contains DPOF information) and double-click on the [DCIM] folder.

5.New subfolder is now visible - [100DSHOT]. The [100DSHOT] subfolder contains all the Economy, Standard, and High Quality images stored as .JPG files. Movie clips are also stored here as .AVI files which can be played using Windows Media Player.

6.You can double-click on the images and movies to view them (provided the appropriate Picture Viewer and Movie Player are installed). These files can also be deleted, copied, or moved like normal computer files.

27

ESPAÑOL

DS6639 Manual-Eng/Fre/Span (086-003300-060)