Appendix A: UT1L Multipin Wiring Guide and Chart
1
2
3
4
SWITCHCRAFT TA3F
MANUFACTURER | MODEL | PIN 1 | PIN 2 | PIN 3 |
AKG | C410 | SHIELD | WHITE | JUMP TO PIN 2 |
RED | ||||
AUDIO TECHNICA | AT831 | YELLOW x 2 | RED x 2 | JUMP TO PIN 2 |
SHIELD | ||||
AUDIO TECHNICA | ATM75 | YELLOW x 2 | RED x 2 | JUMP TO PIN 2 |
SHIELD | ||||
AUDIO TECHNICA | ATPRO8HE | YELLOW x 2 | N/C | RED x 2 |
SHIELD | ||||
AUDIO TECHNICA | ATPRO35X | YELLOW x 2 | RED x 2 | JUMP TO PIN 2 |
SHIELD | ||||
AUDIO TECHNICA | MT350 | SHIELD | WHITE | JUMP TO PIN 2 |
CROWN | CM311(E) | SHIELD | RED | JUMP TO PIN 2 |
WHITE | ||||
SONY | ECM44 | SHIELD | RED | JUMP TO PIN 2 |
WHITE | ||||
SONY | ECM55 | SHIELD | RED | JUMP TO PIN 2 |
WHITE | ||||
SONY | ECM77 | SHIELD | RED | JUMP TO PIN 2 |
WHITE | ||||
SONY | ECM144 | SHIELD | WHITE | JUMP TO PIN 2 |
SENNHEISER | MKE2 | SHIELD | RED | JUMP TO PIN 2 |
BLUE | ||||
SENNHEISER | MKE40 | SHIELD | RED | JUMP TO PIN 2 |
BLUE | ||||
SENNHEISER | MKE48 | SHIELD | RED | JUMP TO PIN 2 |
BLUE | ||||
SAMSON | ECM40 | SHIELD | WHITE | JUMP TO PIN 2 |
COUNTRYMAN | ISOMAX | SHIELD | WHITE | JUMP TO PIN 2 |
|
|
|
|
|
GUITAR |
| SHIELD | N/C | AUDIO |
|
|
|
|
|
PIN INFORMATION | SWITCHCRAFT | GROUND | +Vdc | AUDIO |
TA3F | ||||
|
|
|
|
|
Procedure for wiring UT1L connector: Unscrew rubber boot 1 and pass wire through 1 and 2. Solder wire to 3 after removing from 4 (use chart above). Reinsert 3 to 4 with attached wire (3 is keyed to fit 4). Plug 2 into 3 again (2 is keyed to 3) and crimp wire. Rescrew rubber boot 1 to 4.
43