LG Electronics LRN3040N Series owner manual System Operation, System Shutdown, Main Monitor Screen

Page 17

Installation 17

System Operation

1.Turn on the unit. System booting will commence. The LG logo image will be displayed on the main monitor during the system booting.

2.When the booting is completed the live window will be

displayed. Click the icon on the system control bar or press the LOGIN button on the remote control to display the log-in window.

3.Select a user name by using the mouse or arrow and the OK button on the remote control. For the first time, you can select the ADMINISTRATOR user name only. You can register a new user with various access rights using the user setup menu.

4.Enter the password by using the virtual keyboard. (Note that the default administrator password is “000000”.)

5.Click the [OK] icon.

You can see the live screen and operate the system.

NOTE

If the system is turned off accidently and then turned on again, the system may take a long time to be rebooted.

System Shutdown

1.First, you must stop playback and exit the setup menu. In playback, press STOP.

2.Press and hold 1(POWER) button on the remote control until the beep sounds and the logout window will be displayed.

3.Enter the password by using the virtual keyboard.

4.Click the [OK] icon. The system will shutdown.

General Explanation of the Live Screen on the Main Monitor

Main Monitor Screen

AB C D E F G									H

AChannel Number

Displays the channel number.

BChannel Name

Displays the edited channel name.

CChannel FPS

Displays the channel FPS value.

DQuick Buttons

The Quick Buttons will appear when the mouse is moved to the camera's live screen. You can use the following functions by clicking it for the selected channel.

You can use the playback function.

You can use the digital zoom function.

You can control the PTZ Camera. (optional)

ECamera Status Icon

Displays the PTZ camera status.

Displays the input audio status.

Displays the IP camera status.

Gold “C” indicates continuous recording.

Gold “I” indicates Instant recording.

Red “S” indicates sensor triggered recording.

Green “M” indicates motion detection recording.

Gray “N” indicates the channel is not being recorded.

FSelected Channel

Displays the selected channel with red box.

3

Installation

Image 17

Contents Network Video Recorder Contact office for compliance of this product Regulatory Information FCC PartDisposal of waste batteries/accumulators Disposal of your old applianceEEE Compliance with Directive. for Turkey only Safety warnings and Cautions Safety Information Contents Emergency Using the playback control menu Using the Protect functionOutput Buzzer Group Authority UserIntroduction FeaturesAccessories Rear Panel Front PanelRemote Control Connections PrecautionsBasic Connection Overview Line inputConnecting USB device Connecting Display deviceConnecting Audio device Connecting IP Camera Connecting E-SATA deviceConnecting Network Connecting Alarm Input and Alarm Output Connecting LKD1000 ControllerAlarm Input Data Transmission/ReceptionAlarm Output Installing the Hard Disk DriveAlarm device Terminal NoRecommended HDD Replacing the Hard Disk DriveMain Monitor Screen System OperationSystem Shutdown Changing the order of cameras Selecting the Split modeMoving the Channels Position To Register Preset Positions Preset SettingsChanging to a Picture in a Preset Position To Clear the Preset PositionTo Tour The Preset Positions Using the Digital Zoom functionSetup for PTZ Cameras Export the recorded dataViewing the System Log List Using a mouse to set a menu Configuration menuViewing System Information Use the left mouse buttons to set the menuSetting the Menu Using the Remote Control Buttons System settingsProperties RemoteNetwork How to register Ddns host nameTCP/IP Date/Time Controller When you want to change Ddns host nameNetwork Streaming Instant Backup UpdateUp to 2 TB Daily/Weekly backupMotion Setting Device settingsStream Setting Audio/Sensor settingTo register the IP device manually To register the IP device automaticallySequence Display settingsStorage Normal Schedule Recording Record settingsCopying from the Scheduled Data of the Channel Copying the Recording ScheduleCopying from the Scheduled Data of the Day Time you want to record. The color of the time block isSensor Event settingsMotion NotificationEmergency MailWhich you want to enable this system e.g. lgecommunity or User settingsOutput Group Authority BuzzerStep Setup Wizard settingsUser Set date and time Instant Recording OperationInstant Playback Using the calendar icon to select a dateSearch and Playback Date and Time SearchBookmark/Protect Search Export SearchFunctions Available During Playback Remote ControlButton Stops playbackUsing the Protect function Using the playback control menuHow to select Protect section How to release the Protect sectionSymptoms Cause & Solution You can reboot the system as follows If you observe any of the following symptomsRecommended USB Memory list Recommended DevicesRecommended External Device list Maker Model Name CapacityExport Configuration Import/Export Device Instant backupSupported function list for device Supported IP Camera Audio/Video CodecTimezone Time zonesTimezone name 1st level 2nd level 3rd level Default Value Factory Default Factory Default Configuration SettingsYYYY/MM/DD Date Current DateDisplay Day Current day of the week Event OFF YESGroup ID Model LRN3040N Series Specifications