LG Electronics LRN3040N Series Using the Digital Zoom function, Export the recorded data

Page 20

20Installation

3

Installation

To Tour The Preset Positions

You can tour all preset positions.

1.Press the TOUR button or Click the uicon.

All registered preset positions in the camera will be selected and the camera position image will be switched on the active monitor.

2.You can stop the tour by pressing the TOUR button or clicking the uicon.

Setup for PTZ Cameras

You can adapt the camera to your requirements by setting up the respective items in menus.

1.Click the icon.

The setup menu appears in the selected window of the main monitor.

2.Use,,, , , , , and buttons to set the options.

NOTE

•Refer to the manuals of the PTZ camera for more details.

•Some PTZ cameras may not operated properly with this unit.

•You cannot control the other functions when the PTZ virtual remote control is displayed.

Using the Digital Zoom function

You can enlarge the current screen 2-4 times using the digital zoom function on one live channel with full screen mode or one channel playback with full screen mode.

1.Press ZOOM(+) button during viewing a live channel in full screen mode or playing back a channel in full screen mode.

2.You can use the zoom screen as following.

•You can move the position of the zoom screen by using the w/s/a/dbuttons.

•You can move the zoom screen by using the mouse. Drag & drop a point to the specific point to move the zoom screen.

3.Press BACK button to exit.

NOTE

The zoom function is deactivated when below case.

•When double click the left mouse button.

•Press the specific channel or function button on the remote control.

•Press the STOP button during the playback.

You can use some options by clicking the right button of the mouse in the digital zoom mode.

•Digital Zoom Control Guide: Shows the guide for using the mouse.

•Exit: Exits from the digital zoom mode.

Export the recorded data

This unit can manually copy recorded images and audio from built- in HDD to the external recording devices.

1.Press COPY or click the icon in the system control bar. The [Video Export] menu appears.

2.Set the [Start Date/Time] and [End Date/Time] to search.

•a/d/w/s: Moves to the options.

•w/s: Sets the selected option.

•OK: Selects option or confirms the setting.

3.Select the channel number and press OK. Repeat this step to select multi channels.

4.Select the one of file format on the drop-down list of the [File Format].

•Native: The Native file is saved with the extention of “*.exp”. The saved native file can playback using the Export Viewer program.

•AVI LG: To playing AVI LG file, you have to install the LG DVR Codec. If you install the LG Network Client, do not need to install the LG DVR Codec.

•AVI: If you select AVI file format, it can play on any media player.

5.Select [Export to] then press OK.

6.Use w/s to select a target device to export.

7.Press OK to confirm it.

8.Click the [Export] icon to start exporting. The exported data will be authorized by the unit before saving and it can only be played back with the exclusive player.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Network Video Recorder Regulatory Information FCC Part Contact office for compliance of this productDisposal of waste batteries/accumulators Disposal of your old applianceEEE Compliance with Directive. for Turkey only Safety warnings and Cautions Safety Information Contents Using the playback control menu Using the Protect function EmergencyOutput Buzzer Group Authority UserIntroduction FeaturesAccessories Front Panel Rear PanelRemote Control Precautions ConnectionsBasic Connection Overview Line inputConnecting USB device Connecting Display deviceConnecting Audio device Connecting IP Camera Connecting E-SATA deviceConnecting Network Connecting LKD1000 Controller Connecting Alarm Input and Alarm OutputAlarm Input Data Transmission/ReceptionInstalling the Hard Disk Drive Alarm OutputAlarm device Terminal NoReplacing the Hard Disk Drive Recommended HDDMain Monitor Screen System OperationSystem Shutdown Changing the order of cameras Selecting the Split modeMoving the Channels Position Preset Settings To Register Preset PositionsChanging to a Picture in a Preset Position To Clear the Preset PositionUsing the Digital Zoom function To Tour The Preset PositionsSetup for PTZ Cameras Export the recorded dataViewing the System Log List Configuration menu Using a mouse to set a menuViewing System Information Use the left mouse buttons to set the menuSystem settings Setting the Menu Using the Remote Control ButtonsProperties RemoteNetwork How to register Ddns host nameTCP/IP Date/Time Controller When you want to change Ddns host nameNetwork Streaming Update Instant BackupDaily/Weekly backup Up to 2 TBDevice settings Motion SettingStream Setting Audio/Sensor settingTo register the IP device automatically To register the IP device manuallySequence Display settingsStorage Record settings Normal Schedule RecordingCopying the Recording Schedule Copying from the Scheduled Data of the ChannelCopying from the Scheduled Data of the Day Time you want to record. The color of the time block isEvent settings SensorMotion NotificationMail EmergencyUser settings Which you want to enable this system e.g. lgecommunity orOutput Group Authority BuzzerStep Setup Wizard settingsUser Set date and time Operation Instant RecordingUsing the calendar icon to select a date Instant PlaybackSearch and Playback Date and Time SearchExport Search Bookmark/Protect SearchRemote Control Functions Available During PlaybackButton Stops playbackUsing the playback control menu Using the Protect functionHow to select Protect section How to release the Protect sectionSymptoms Cause & Solution If you observe any of the following symptoms You can reboot the system as followsRecommended Devices Recommended USB Memory listRecommended External Device list Maker Model Name CapacityDevice Instant backup Export Configuration Import/ExportSupported function list for device Supported IP Camera Audio/Video CodecTimezone Time zonesTimezone name Factory Default Configuration Settings 1st level 2nd level 3rd level Default Value Factory DefaultDate Current Date YYYY/MM/DDDisplay Day Current day of the week OFF YES EventGroup ID Specifications Model LRN3040N Series
Top Page Image Contents