LG Electronics LRN3040N Series owner manual Tcp/Ip, Network, How to register Ddns host name

Page 24

24Installation

TCP/IP v4

3

Installation

• Interface: Select a LAN port you want to use.

 

 

• DHCP: Select this option when a DHCP server is installed on the

 

network to allow IP address assignment. With this setting, the IP

 

address is assigned automatically.

 

• IP Address: Enter the IP address.

 

• Subnet Mask: Enter the subnet mask address.

 

• Gateway: Enter the gateway address.

 

• Primary DNS: Enter the Primary domain name server that

 

translates the hostnames into IP address.

 

• Secondary DNS : Enter the Secondary DNS server address that

 

backups the Primary DNS.

 

TCP/IP v6

•Interface: Select a LAN port you want to use.

•Auto: Select this option to assign the IP address automatically.

•IP Address: Enter the IP address.

•Subnet Prefix Length: Enter the Subnet Prefix length.

An IPv6 prefix indicates the portion of the address used for routing or identifying an address range.

•Gateway: Enter the gateway address.

•Primary DNS: Enter the Primary domain name server that translates the hostnames into IP address.

•Secondary DNS : Enter the Secondary DNS server address that backups the Primary DNS.

Network

•TCP/IP Port No.: Enter the TCP/IP Port number. You can watch the live surveillance image over the network with the PC Client program. The factory default TCP/IP port for transmission of video data is 9001 and audio data is 9003. However in some cases it is better to change this port number for added flexibility or security. You can edit this port between 1025 and 65535.

•Web Server Port No.: Enter the Web Sever Port number. You can watch the live surveillance image over the network with a web browser. Typically the TCP port used by HTTP is 80. However in some cases it is better to change this port number for added flexibility or security. You can edit this port to 80 or between 1025 and 65535.

•Audio Port No.: Enter the Audio Port number. You can edit this port between 1025 and 65535.

•Bandwidth Throttle: Select [All] or [Per User] to set the bandwidth value.

-- All: Set same bandwidth to all of users.

-- Per User: You can set the bandwidth value per each user. Select [User ID] from the left drop-down list. And then, set the bandwidth from right drop-down list

•RTSP Port : Enter the RTSP Port number. You can edit this port between 1 and 65535. Default Port number is 554.

•DDNS Service: Marks up to activate the DDNS function. This free service is very useful when combined with the LG DDNS Server. It allows the user to connect the IP device using the URL, rather than an IP Address. This also solves the problem of having a dynamic IP address.

•Host Name: Enter the host name you want to use.

You can not use the “www”, “mail”, “http”, “ftp”, “com”, “lg”, “lge”, “lgddns”, “lgeddns”, “ddns” for host name.

•Registered Host: The registered host name appears.

•Update: Register the host name you typed in [Host Name] to LG DDNS server.

How to register DDNS host name

When you use the DDNS function for the first time after you purchased LG DVR/NVR

1.Displays the DVR/NVR setup menu.

2.Select [System] > [Network] option.

3.Marks up for the [DDNS Service] option.

4.Enter the host name in the [Host Name] option.

5.Press the [Update] button. If host registration is properly completed, the host name will be displayed in the [Registered Host] option. If the host name is not registered after updating, please check network connection.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Network Video Recorder Regulatory Information FCC Part Contact office for compliance of this productDisposal of your old appliance EEE Compliance with Directive. for Turkey onlyDisposal of waste batteries/accumulators Safety warnings and Cautions Safety Information Contents Using the playback control menu Using the Protect function EmergencyOutput Buzzer Group Authority UserFeatures AccessoriesIntroduction Front Panel Rear PanelRemote Control Precautions ConnectionsBasic Connection Overview Line inputConnecting Display device Connecting Audio deviceConnecting USB device Connecting E-SATA device Connecting NetworkConnecting IP Camera Connecting LKD1000 Controller Connecting Alarm Input and Alarm OutputAlarm Input Data Transmission/ReceptionInstalling the Hard Disk Drive Alarm OutputAlarm device Terminal NoReplacing the Hard Disk Drive Recommended HDDSystem Operation System ShutdownMain Monitor Screen Selecting the Split mode Moving the Channels PositionChanging the order of cameras Preset Settings To Register Preset PositionsChanging to a Picture in a Preset Position To Clear the Preset PositionUsing the Digital Zoom function To Tour The Preset PositionsSetup for PTZ Cameras Export the recorded dataViewing the System Log List Configuration menu Using a mouse to set a menuViewing System Information Use the left mouse buttons to set the menuSystem settings Setting the Menu Using the Remote Control ButtonsProperties RemoteHow to register Ddns host name TCP/IPNetwork When you want to change Ddns host name Network StreamingDate/Time Controller Update Instant BackupDaily/Weekly backup Up to 2 TBDevice settings Motion SettingStream Setting Audio/Sensor settingTo register the IP device automatically To register the IP device manuallyDisplay settings StorageSequence Record settings Normal Schedule RecordingCopying the Recording Schedule Copying from the Scheduled Data of the ChannelCopying from the Scheduled Data of the Day Time you want to record. The color of the time block isEvent settings SensorMotion NotificationMail EmergencyUser settings Which you want to enable this system e.g. lgecommunity orOutput Group Authority BuzzerSetup Wizard settings UserStep Set date and time Operation Instant RecordingUsing the calendar icon to select a date Instant PlaybackSearch and Playback Date and Time SearchExport Search Bookmark/Protect SearchRemote Control Functions Available During PlaybackButton Stops playbackUsing the playback control menu Using the Protect functionHow to select Protect section How to release the Protect sectionSymptoms Cause & Solution If you observe any of the following symptoms You can reboot the system as followsRecommended Devices Recommended USB Memory listRecommended External Device list Maker Model Name CapacityDevice Instant backup Export Configuration Import/ExportSupported function list for device Supported IP Camera Audio/Video CodecTime zones Timezone nameTimezone Factory Default Configuration Settings 1st level 2nd level 3rd level Default Value Factory DefaultDate Current Date YYYY/MM/DDDisplay Day Current day of the week OFF YES EventGroup ID Specifications Model LRN3040N Series
Top Page Image Contents