LG Electronics LRN3040N Series owner manual Daily/Weekly backup, Up to 2 TB

Page 27

Installation 27

Daily/Weekly backup

1.Connect the USB device for backup.

2.Select WEEKLY or DAILY on the schedule options.

3.Select the backup device.

4.Enter the date and/or time to start backup on the schedule start option.

5.Enter the day of week and/or time on the Time Range Start option.

6.Enter the day of week and/or time on the Time Range End option.

7.Select the [Estimation Size] icon and press OK.

8.Check the size of selected data and free space of USB device. If the USB device does not have enough space, change the USB device to a USB which has enough space or erase data of the connected USB device.

NOTE

•The backup function is not supported on the external USB CD-ROM driver.

•Available external device for backup.

Device

Capacity

 

 

USB HDD

Up to 2 TB.

 

 

E-SATA HDD

Up to 2 TB.

 

 

•Use the recommended external USB devices for preventing malfunction (See the page 45.).

•For the latest recommended HDD list, please visit http://www.lgecommercial.com

•An external media has to be formatted on this unit to prevent malfunction.

•You cannot use the [Estimate size], [Start Backup] and [Erase Media] options in backup progressing.

•Do not remove the external device while the backup is in progress, it may cause a malfunction.

•If you format the external media by using a PC with FAT32, the media may not be used on this unit.

•Check the size of the selected data and free space of the external device. If the device does not have enough space, create space on the device or erase the previously stored data.

1.Select the [Estimate Size] icon and press OK.

The size of the selected data and free space is displayed.

2.Select [OK] and press OK to close the window.

•You cannot stop the backup when the backup is in progress.

•The warning message will appear for the conditions listed below.

-- When the start time and end time are the same value. -- When the start time is later than the end time.

-- When you set the time for data that does not exist. -- When the start time and end time setting are wrong. -- A media does not have enough space.

-- When the selected USB device is disconnected.

•You can see the backup progress status on the system control bar.

•The estimated size of backup data is only the approximate size. So you must prepare sufficient space on the media to prevent lack of space.

•At the scheduled recording time, you can check the backup status on the system control bar.

•While export is in progress or searching the backup data from the external USB device, the scheduled backup will not be started. After the export or backup search is finished, scheduled backup will be restarted.

•When you set the schedule backup, the backup data size is estimated from the recording settings of the Setup menu. If the real recorded data size is over the estimated recording data size, the schedule backup may not be activated.

3

Installation

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Network Video Recorder Contact office for compliance of this product Regulatory Information FCC PartDisposal of your old appliance EEE Compliance with Directive. for Turkey onlyDisposal of waste batteries/accumulators Safety warnings and Cautions Safety Information Contents Group Authority User Using the playback control menu Using the Protect functionEmergency Output BuzzerFeatures AccessoriesIntroduction Rear Panel Front PanelRemote Control Line input PrecautionsConnections Basic Connection OverviewConnecting Display device Connecting Audio deviceConnecting USB device Connecting E-SATA device Connecting NetworkConnecting IP Camera Data Transmission/Reception Connecting LKD1000 ControllerConnecting Alarm Input and Alarm Output Alarm InputTerminal No Installing the Hard Disk DriveAlarm Output Alarm deviceRecommended HDD Replacing the Hard Disk DriveSystem Operation System ShutdownMain Monitor Screen Selecting the Split mode Moving the Channels PositionChanging the order of cameras To Clear the Preset Position Preset SettingsTo Register Preset Positions Changing to a Picture in a Preset PositionExport the recorded data Using the Digital Zoom functionTo Tour The Preset Positions Setup for PTZ CamerasViewing the System Log List Use the left mouse buttons to set the menu Configuration menuUsing a mouse to set a menu Viewing System InformationRemote System settingsSetting the Menu Using the Remote Control Buttons PropertiesHow to register Ddns host name TCP/IPNetwork When you want to change Ddns host name Network StreamingDate/Time Controller Instant Backup UpdateUp to 2 TB Daily/Weekly backupAudio/Sensor setting Device settingsMotion Setting Stream SettingTo register the IP device manually To register the IP device automaticallyDisplay settings StorageSequence Normal Schedule Recording Record settingsTime you want to record. The color of the time block is Copying the Recording ScheduleCopying from the Scheduled Data of the Channel Copying from the Scheduled Data of the DayNotification Event settingsSensor MotionEmergency MailBuzzer User settingsWhich you want to enable this system e.g. lgecommunity or Output Group AuthoritySetup Wizard settings UserStep Set date and time Instant Recording OperationDate and Time Search Using the calendar icon to select a dateInstant Playback Search and PlaybackBookmark/Protect Search Export SearchStops playback Remote ControlFunctions Available During Playback ButtonHow to release the Protect section Using the playback control menuUsing the Protect function How to select Protect sectionSymptoms Cause & Solution You can reboot the system as follows If you observe any of the following symptomsMaker Model Name Capacity Recommended DevicesRecommended USB Memory list Recommended External Device listSupported IP Camera Audio/Video Codec Device Instant backupExport Configuration Import/Export Supported function list for deviceTime zones Timezone nameTimezone 1st level 2nd level 3rd level Default Value Factory Default Factory Default Configuration SettingsYYYY/MM/DD Date Current DateDisplay Day Current day of the week Event OFF YESGroup ID Model LRN3040N Series Specifications
Top Page Image Contents