LG Electronics LRN3040N Series owner manual Network Streaming, Date/Time Controller

Page 25

Installation 25

When you want to change DDNS host name

function.

If you want to change the registered host name to new one, follow

• Daylight Saving Start: Select the Daylight Saving start time.

as shown below.

• Daylight Saving End: Select the Daylight Saving end time.

1.

Enter a new host name in the [Host Name] option.

 

2.

Press the [Update] button. The confirmation window will be

NTP

 

displayed to change your host name.

3.Click the [OK] button. When host name is properly changed, the changed host name will be displayed in the [Registered Host] option. If host name is not changed after updating, please check network connection.

Network Streaming

CH: Displays the channel number.

3

Installation

NTP: Marks up, if you want to synchronize the system's date and time with those of the time server called NTP. (Network Time Protocol) Specify the NTP server’s name.

Time Server: For most cases select public. The system will obtain the average time among 5 public servers (time.nist.gov, time-a. nist.gov, time-b.nist.gov, ntp.nasa.gov, clock.isc.org).

Private Time Server: Enter the private time server’s IP address or host name using the virtual keyboard.

Profile: Selects the profile of stream. The [Profile] option is activated in case of IP Camera only.

NOTE

If you need to adjust the image size to send to the client, set the stream option of the [IP Device-Profile1 or Profile2]. And then select the proper Profile from the [Network Streaming- Profile]. You can control the bandwidth value forward to client.

Sync. Interval: You can set synchronized intervals with the NTP time server to 1 day, 1 week, 1 month and 1 hour.

NTP Test: Select [NTP Test] to test the NTP server.

NOTE

If the NTP option is not set to this system, there can be a gap between the system time and actual time. Using NTP is recommended.

Date/Time

Controller

Date: Select the current year, month and day.

Time: Select the current time.

Date Format: Select the date display format.

Time Format: Select the time display format.

Time Zone: Select the time zone in the area where the system is installed.

Daylight Saving: Mark up if you want to use the daylight saving

IR Remote ID: Select the IR Remote ID for this unit. If you use multi systems set the IR Remote ID for each unit.

Remote Controller ID: Select the Remote Controller ID for this unit. If you use multi systems, set the Remote Controller ID for each unit. You can control the system by using the LKD1000 controller. (For more details refer to the LKD1000 owner’s manual.)

Image 25
Contents Network Video Recorder Contact office for compliance of this product Regulatory Information FCC PartEEE Compliance with Directive. for Turkey only Disposal of your old applianceDisposal of waste batteries/accumulators Safety warnings and Cautions Safety Information Contents Emergency Using the playback control menu Using the Protect functionOutput Buzzer Group Authority UserAccessories FeaturesIntroduction Rear Panel Front PanelRemote Control Connections PrecautionsBasic Connection Overview Line inputConnecting Audio device Connecting Display deviceConnecting USB device Connecting Network Connecting E-SATA deviceConnecting IP Camera Connecting Alarm Input and Alarm Output Connecting LKD1000 ControllerAlarm Input Data Transmission/ReceptionAlarm Output Installing the Hard Disk DriveAlarm device Terminal NoRecommended HDD Replacing the Hard Disk DriveSystem Shutdown System OperationMain Monitor Screen Moving the Channels Position Selecting the Split modeChanging the order of cameras To Register Preset Positions Preset SettingsChanging to a Picture in a Preset Position To Clear the Preset PositionTo Tour The Preset Positions Using the Digital Zoom functionSetup for PTZ Cameras Export the recorded dataViewing the System Log List Using a mouse to set a menu Configuration menuViewing System Information Use the left mouse buttons to set the menuSetting the Menu Using the Remote Control Buttons System settingsProperties RemoteTCP/IP How to register Ddns host nameNetwork Network Streaming When you want to change Ddns host nameDate/Time Controller Instant Backup UpdateUp to 2 TB Daily/Weekly backupMotion Setting Device settingsStream Setting Audio/Sensor settingTo register the IP device manually To register the IP device automaticallyStorage Display settingsSequence Normal Schedule Recording Record settingsCopying from the Scheduled Data of the Channel Copying the Recording ScheduleCopying from the Scheduled Data of the Day Time you want to record. The color of the time block isSensor Event settingsMotion NotificationEmergency MailWhich you want to enable this system e.g. lgecommunity or User settingsOutput Group Authority BuzzerUser Setup Wizard settingsStep Set date and time Instant Recording OperationInstant Playback Using the calendar icon to select a dateSearch and Playback Date and Time SearchBookmark/Protect Search Export SearchFunctions Available During Playback Remote ControlButton Stops playbackUsing the Protect function Using the playback control menuHow to select Protect section How to release the Protect sectionSymptoms Cause & Solution You can reboot the system as follows If you observe any of the following symptomsRecommended USB Memory list Recommended DevicesRecommended External Device list Maker Model Name CapacityExport Configuration Import/Export Device Instant backupSupported function list for device Supported IP Camera Audio/Video CodecTimezone name Time zonesTimezone 1st level 2nd level 3rd level Default Value Factory Default Factory Default Configuration SettingsYYYY/MM/DD Date Current DateDisplay Day Current day of the week Event OFF YESGroup ID Model LRN3040N Series Specifications