LG Electronics LRN3040N Series owner manual Replacing the Hard Disk Drive, Recommended HDD

Page 16

16Installation

2. Detach the top case by sliding it after removing the screws. You	Replacing the Hard Disk Drive
must lift up the top case verticality.	Turn the power of the unit off and detach the power plug from the

	outlet.
	1.	Follow steps 1 to 3 described in “Installing the Hard Disk Drive”.
	2.	Remove the connector from the HDD.
	3.	Remove the screws from the hard disk drive on the bottom of
		the hard disk mounting bracket.
	4.	Replace the new HDD.
3. Remove the screws and detach the hard disk mounting brackets	5.	Follow steps 4 to 10 described in “Installing the Hard Disk Drive”.
from the unit.	6.	After replacing the hard disk drive, insert the power plug into
	6.
		the outlet and turn the power of the unit on. The new HDD is
3		detected and formatted.
Installation		NOTE
		NOTE
	• Do not use an electric screwdriver to fix them.
	automatically.
	• Make sure that each of the SATA cables is connected to the
		connector housing through its holes.
	• Do not stack them nor keep them upright.

	4. Attach the HDD onto the hard disk mounting brackets with four	Recommended HDD
		For the latest recommended HDD list, please visit
	screws.	For the latest recommended HDD list, please visit
	screws.	http://www.lgecommercial.com
		http://www.lgecommercial.com
		NOTE
		If you do not use the recommended HDD, the system may not be
		operated normally.

5.Attach the hard disk mounting brackets with the screws.

6.Connect the HDD power cable. You must use the supplied SATA power cable. The SATA power cable that used for normal PC is not compatible with this unit.

7.Connect the Serial SATA cable.

8.Connect the SATA cable of the HDD to the SATA connector of the main board.

9.Assemble the top case.

10.Fix the screws.

11.When you turn the power of the unit on, the new HDD is detected and formatted automatically.

Image 16

Contents Network Video Recorder Regulatory Information FCC Part Contact office for compliance of this productEEE Compliance with Directive. for Turkey only Disposal of your old applianceDisposal of waste batteries/accumulators Safety warnings and Cautions Safety Information Contents Using the playback control menu Using the Protect function EmergencyOutput Buzzer Group Authority UserAccessories FeaturesIntroduction Front Panel Rear PanelRemote Control Precautions ConnectionsBasic Connection Overview Line inputConnecting Audio device Connecting Display deviceConnecting USB device Connecting Network Connecting E-SATA deviceConnecting IP Camera Connecting LKD1000 Controller Connecting Alarm Input and Alarm OutputAlarm Input Data Transmission/ReceptionInstalling the Hard Disk Drive Alarm OutputAlarm device Terminal NoReplacing the Hard Disk Drive Recommended HDDSystem Shutdown System OperationMain Monitor Screen Moving the Channels Position Selecting the Split modeChanging the order of cameras Preset Settings To Register Preset PositionsChanging to a Picture in a Preset Position To Clear the Preset PositionUsing the Digital Zoom function To Tour The Preset PositionsSetup for PTZ Cameras Export the recorded dataViewing the System Log List Configuration menu Using a mouse to set a menuViewing System Information Use the left mouse buttons to set the menuSystem settings Setting the Menu Using the Remote Control ButtonsProperties RemoteTCP/IP How to register Ddns host nameNetwork Network Streaming When you want to change Ddns host nameDate/Time Controller Update Instant BackupDaily/Weekly backup Up to 2 TBDevice settings Motion SettingStream Setting Audio/Sensor settingTo register the IP device automatically To register the IP device manuallyStorage Display settingsSequence Record settings Normal Schedule RecordingCopying the Recording Schedule Copying from the Scheduled Data of the ChannelCopying from the Scheduled Data of the Day Time you want to record. The color of the time block isEvent settings SensorMotion NotificationMail EmergencyUser settings Which you want to enable this system e.g. lgecommunity orOutput Group Authority BuzzerUser Setup Wizard settingsStep Set date and time Operation Instant RecordingUsing the calendar icon to select a date Instant PlaybackSearch and Playback Date and Time SearchExport Search Bookmark/Protect SearchRemote Control Functions Available During PlaybackButton Stops playbackUsing the playback control menu Using the Protect functionHow to select Protect section How to release the Protect sectionSymptoms Cause & Solution If you observe any of the following symptoms You can reboot the system as followsRecommended Devices Recommended USB Memory listRecommended External Device list Maker Model Name CapacityDevice Instant backup Export Configuration Import/ExportSupported function list for device Supported IP Camera Audio/Video CodecTimezone name Time zonesTimezone Factory Default Configuration Settings 1st level 2nd level 3rd level Default Value Factory DefaultDate Current Date YYYY/MM/DDDisplay Day Current day of the week OFF YES EventGroup ID Specifications Model LRN3040N Series