LG Electronics LRN3040N Series Set date and time, Interface Select a LAN port you want to use

Page 37

Installation 37

Step 2	Step 4
Set date and time.	Set recording schedule.

•Date: Select the current year, month and day.

•Time: Select the current time.

•Date Format: Select the date display format.

•Time Format: Select the time display format.

•Time Zone: Select the time zone in the area where the system is installed.

•Daylight Saving: Mark up when you use the daylight saving function.

•Daylight Saving Start: Select the Daylight Saving start time.

•Daylight Saving End: Select the Daylight Saving end time.

Step 3

Set network address for LAN ports.

•Weekday: Sets the recording mode to weekday (Mon-Fri).

•Weekend: Sets the recording mode to weekend (Sat-Sun).

3

Installation

•Interface: Select a LAN port you want to use.

•DHCP: Select this option when a DHCP server is installed on the network to allow IP address assignment. With this setting, the IP address is assigned automatically.

•IP Address: Enter the IP address.

•Subnet Mask: Enter the subnet mask address.

•Gateway: Enter the gateway address.

•Primary DNS: Enter the Primary domain name server that translates the hostnames into IP address.

•Secondary DNS : Enter the Secondary DNS server address that backups the Primary DNS.

Image 37

Contents Network Video Recorder Contact office for compliance of this product Regulatory Information FCC PartEEE Compliance with Directive. for Turkey only Disposal of your old applianceDisposal of waste batteries/accumulators Safety warnings and Cautions Safety Information Contents Emergency Using the playback control menu Using the Protect functionOutput Buzzer Group Authority UserAccessories FeaturesIntroduction Rear Panel Front PanelRemote Control Connections PrecautionsBasic Connection Overview Line inputConnecting Audio device Connecting Display deviceConnecting USB device Connecting Network Connecting E-SATA deviceConnecting IP Camera Connecting Alarm Input and Alarm Output Connecting LKD1000 ControllerAlarm Input Data Transmission/ReceptionAlarm Output Installing the Hard Disk DriveAlarm device Terminal NoRecommended HDD Replacing the Hard Disk DriveSystem Shutdown System OperationMain Monitor Screen Moving the Channels Position Selecting the Split modeChanging the order of cameras To Register Preset Positions Preset SettingsChanging to a Picture in a Preset Position To Clear the Preset PositionTo Tour The Preset Positions Using the Digital Zoom functionSetup for PTZ Cameras Export the recorded dataViewing the System Log List Using a mouse to set a menu Configuration menuViewing System Information Use the left mouse buttons to set the menuSetting the Menu Using the Remote Control Buttons System settingsProperties RemoteTCP/IP How to register Ddns host nameNetwork Network Streaming When you want to change Ddns host nameDate/Time Controller Instant Backup UpdateUp to 2 TB Daily/Weekly backupMotion Setting Device settingsStream Setting Audio/Sensor settingTo register the IP device manually To register the IP device automaticallyStorage Display settingsSequence Normal Schedule Recording Record settingsCopying from the Scheduled Data of the Channel Copying the Recording ScheduleCopying from the Scheduled Data of the Day Time you want to record. The color of the time block isSensor Event settingsMotion NotificationEmergency MailWhich you want to enable this system e.g. lgecommunity or User settingsOutput Group Authority BuzzerUser Setup Wizard settingsStep Set date and time Instant Recording OperationInstant Playback Using the calendar icon to select a dateSearch and Playback Date and Time SearchBookmark/Protect Search Export SearchFunctions Available During Playback Remote ControlButton Stops playbackUsing the Protect function Using the playback control menuHow to select Protect section How to release the Protect sectionSymptoms Cause & Solution You can reboot the system as follows If you observe any of the following symptomsRecommended USB Memory list Recommended DevicesRecommended External Device list Maker Model Name CapacityExport Configuration Import/Export Device Instant backupSupported function list for device Supported IP Camera Audio/Video CodecTimezone name Time zonesTimezone 1st level 2nd level 3rd level Default Value Factory Default Factory Default Configuration SettingsYYYY/MM/DD Date Current DateDisplay Day Current day of the week Event OFF YESGroup ID Model LRN3040N Series Specifications