LG Electronics LRN3040N Series owner manual Operation, Instant Recording

Page 38

38Operation

4 Operation

Instant Recording

Panic Recording

4

Operation

Images from a camera will be recorded on the built-in hard disk. Ensure all the cameras are connected and that time and date have been set correctly.

Before you start recording, first check the repeat recording settings in the recording menu of the system setup, and then make the recording settings.

1.Press the REC button and then press the channel button you want to record. The recording type indicator turns gold on the selected channel screen of the monitor.

2.Press the REC button and then press the channel button you want to stop recording. If you stop instant recording, the recording mode will be changed into the scheduled recording mode (Continuous/ Sensor / Motion records). If the schedule is not set, the recording type indicator turns gray on the selected channel screen of the main monitor.

You can record the all channels at the same time. This function can operate video input channel only.

1.Press and hold the REC button until the Recording Type indicator turns gold on the all live channel screens.

All channels of system starts recording immediately.

2.Press and hold the REC button until the Recording Type indicator turns gray on the all live channel screens. All channels of system stops recording immediately.

NOTE

•External recording devices can be used as copy areas for images recorded on the hard disk. It is able to record images on the external recording devices directly.

•You can record instantly with the left mouse button.

1.Move the cursor to the desired channel screen on the main monitor.

2.Click the recording type indicator with the left mouse button and recording starts. Click it once again and the instant record stops and the recording type indicator will be changed into the scheduled recording mode (Continuous / Sensor / Motion record). If the schedule is not set, the recording type indicator turns gray.

•You can use the instant recording also for the channels scheduled such as sensor, motion or continuous.

•Once you stop instant recording, the recording type indicator will be changed to the scheduled recording mode.

•You can not record the Instant and Continuous recording in following conditions.

-- A HDD is not attached. -- A HDD is not formatted.

-- The channel has no video input for display. -- Overwrite is set to “OFF”.

-- The schedule (Sensor/Motion) record is not set.

•Priority of record.

Instant record > Sensor record > Motion record > Continuous record.

•The Warning message is displayed when the HDD problem occurs during the recording.

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Network Video Recorder Regulatory Information FCC Part Contact office for compliance of this productDisposal of waste batteries/accumulators Disposal of your old applianceEEE Compliance with Directive. for Turkey only Safety warnings and Cautions Safety Information Contents Output Buzzer Using the playback control menu Using the Protect functionEmergency Group Authority UserIntroduction FeaturesAccessories Front Panel Rear PanelRemote Control Basic Connection Overview PrecautionsConnections Line inputConnecting USB device Connecting Display deviceConnecting Audio device Connecting IP Camera Connecting E-SATA deviceConnecting Network Alarm Input Connecting LKD1000 ControllerConnecting Alarm Input and Alarm Output Data Transmission/ReceptionAlarm device Installing the Hard Disk DriveAlarm Output Terminal NoReplacing the Hard Disk Drive Recommended HDDMain Monitor Screen System OperationSystem Shutdown Changing the order of cameras Selecting the Split modeMoving the Channels Position Changing to a Picture in a Preset Position Preset SettingsTo Register Preset Positions To Clear the Preset PositionSetup for PTZ Cameras Using the Digital Zoom functionTo Tour The Preset Positions Export the recorded dataViewing the System Log List Viewing System Information Configuration menuUsing a mouse to set a menu Use the left mouse buttons to set the menuProperties System settingsSetting the Menu Using the Remote Control Buttons RemoteNetwork How to register Ddns host nameTCP/IP Date/Time Controller When you want to change Ddns host nameNetwork Streaming Update Instant BackupDaily/Weekly backup Up to 2 TBStream Setting Device settingsMotion Setting Audio/Sensor settingTo register the IP device automatically To register the IP device manuallySequence Display settingsStorage Record settings Normal Schedule RecordingCopying from the Scheduled Data of the Day Copying the Recording ScheduleCopying from the Scheduled Data of the Channel Time you want to record. The color of the time block isMotion Event settingsSensor NotificationMail EmergencyOutput Group Authority User settingsWhich you want to enable this system e.g. lgecommunity or BuzzerStep Setup Wizard settingsUser Set date and time Operation Instant RecordingSearch and Playback Using the calendar icon to select a dateInstant Playback Date and Time SearchExport Search Bookmark/Protect SearchButton Remote ControlFunctions Available During Playback Stops playbackHow to select Protect section Using the playback control menuUsing the Protect function How to release the Protect sectionSymptoms Cause & Solution If you observe any of the following symptoms You can reboot the system as followsRecommended External Device list Recommended DevicesRecommended USB Memory list Maker Model Name CapacitySupported function list for device Device Instant backupExport Configuration Import/Export Supported IP Camera Audio/Video CodecTimezone Time zonesTimezone name Factory Default Configuration Settings 1st level 2nd level 3rd level Default Value Factory DefaultDate Current Date YYYY/MM/DDDisplay Day Current day of the week OFF YES EventGroup ID Specifications Model LRN3040N Series
Top Page Image Contents