LG Electronics LRN3040N Series owner manual To register the IP device automatically

Page 29

Installation 29

To register the IP device automatically

1.Click the [AUTO] button.

2.The search window will be displayed and start to search the IP device automatically. By stopping or restarting the search, click [Stop] or [Refresh] button.

3.Click the check box of desired device.

4.Enter the [User Name] and the [Password] and then click the [Add] button. When you select several channels, channels are assigned same ID and password.

5.Confirm the result of authentication on the [Verify] option.

•O: The verification is valid.

•X: The verification is invalid. Check the ID and password again.

•XX: Connection failed.

6.Click the check box of confirmed cameras. Selected cameras are registered channel in order.

7.Click the [CLOSE] button to exit the window.

NOTE

The information of search result such as model name, MAC and others may not be shown depending on security level or connection information.

To register the IP device manually

	1.	Click the [MANUAL] button.	3
	2.	Enter the IP address.	Installation
	3.	Click the check box of desired device.	Installation
	3.	Click the check box of desired device.
	4.	Enter the [User Name] and the [Password] and then click the
		[Add] button. When you select several channels, channels are
		assigned same ID and password.
	5.	Confirm the result of authentication on the [Verify] option.
	6.	Click the check box of confirmed cameras. Selected cameras are
		registered channel in order.
	7.	Click the [CLOSE] button to exit the window.

NOTE

•The Supported IP camera specifications.

Specification	Description

Driver	LGE, AXIS, ONVIF

Recording mode	Continuous, Instant, Motion,
	Sensor

Video Codec	H.264, MPEG4, MJPEG

Audio recording and	Support
playback

Resolution	CIF, Half D1(2CIF), D1(4CIF), UXGA,
	720p, 1080p (Up to 5M)

Stream	LGE (Master-0, Slave-0)
	ONVIF (The stream that is
	supported from camera)
	AXIS (H.264, MPEG4, MJPEG)

PTZ	Support

Sensor/Motion input	Support

•It takes time to search IP devices and the necessary time depends on the network environment.

Image 29

Contents Network Video Recorder Contact office for compliance of this product Regulatory Information FCC PartDisposal of waste batteries/accumulators Disposal of your old applianceEEE Compliance with Directive. for Turkey only Safety warnings and Cautions Safety Information Contents Emergency Using the playback control menu Using the Protect functionOutput Buzzer Group Authority UserIntroduction FeaturesAccessories Rear Panel Front PanelRemote Control Connections PrecautionsBasic Connection Overview Line inputConnecting USB device Connecting Display deviceConnecting Audio device Connecting IP Camera Connecting E-SATA deviceConnecting Network Connecting Alarm Input and Alarm Output Connecting LKD1000 ControllerAlarm Input Data Transmission/ReceptionAlarm Output Installing the Hard Disk DriveAlarm device Terminal NoRecommended HDD Replacing the Hard Disk DriveMain Monitor Screen System OperationSystem Shutdown Changing the order of cameras Selecting the Split modeMoving the Channels Position To Register Preset Positions Preset SettingsChanging to a Picture in a Preset Position To Clear the Preset PositionTo Tour The Preset Positions Using the Digital Zoom functionSetup for PTZ Cameras Export the recorded dataViewing the System Log List Using a mouse to set a menu Configuration menuViewing System Information Use the left mouse buttons to set the menuSetting the Menu Using the Remote Control Buttons System settingsProperties RemoteNetwork How to register Ddns host nameTCP/IP Date/Time Controller When you want to change Ddns host nameNetwork Streaming Instant Backup UpdateUp to 2 TB Daily/Weekly backupMotion Setting Device settingsStream Setting Audio/Sensor settingTo register the IP device manually To register the IP device automaticallySequence Display settingsStorage Normal Schedule Recording Record settingsCopying from the Scheduled Data of the Channel Copying the Recording ScheduleCopying from the Scheduled Data of the Day Time you want to record. The color of the time block isSensor Event settingsMotion NotificationEmergency MailWhich you want to enable this system e.g. lgecommunity or User settingsOutput Group Authority BuzzerStep Setup Wizard settingsUser Set date and time Instant Recording OperationInstant Playback Using the calendar icon to select a dateSearch and Playback Date and Time SearchBookmark/Protect Search Export SearchFunctions Available During Playback Remote ControlButton Stops playbackUsing the Protect function Using the playback control menuHow to select Protect section How to release the Protect sectionSymptoms Cause & Solution You can reboot the system as follows If you observe any of the following symptomsRecommended USB Memory list Recommended DevicesRecommended External Device list Maker Model Name CapacityExport Configuration Import/Export Device Instant backupSupported function list for device Supported IP Camera Audio/Video CodecTimezone Time zonesTimezone name 1st level 2nd level 3rd level Default Value Factory Default Factory Default Configuration SettingsYYYY/MM/DD Date Current DateDisplay Day Current day of the week Event OFF YESGroup ID Model LRN3040N Series Specifications