LG Electronics LRN3040N Series owner manual Viewing the System Log List

Page 21

Installation

21

NOTE

•Check the export device before you proceed.

•You can also use the COPY button on the remote control for export function.

•If you use the external device, the external device has to be formatted on this unit.

1.Connect the external device to the USB port on the front or the rear of the system.

2.Select the [Format] icon then press OK.

Confirm window is displayed after format is completed.

3.Select [OK] and press OK to close the window.

•Check the size of the selected data and free space of the external device. If the device does not have enough space, create space on the device or erase the previously stored data.

•Export can not be executed while the backup is in progress.

•You can search the exported data with the supplied viewer software.

•When you export the recorded data, the video data, audio data, the system log and event log data will also be exported.

•When you export the recorded data the export viewer program will also be exported in the [ExportViewer] folder of the device. The exported data file name is made automatically as the [Channel name_export date_export time.exp] type.

•Do not remove the USB device while the export is in progress, it may cause a malfunction.

•The warning message appears for the conditions listed below.

-- When the start date/time and end date/time are the same value.

-- When the start date/time is later than the end date/time. -- The export media does not have enough space.

-- When you set the time for data that does not exist.

•An external media has to be formatted on this unit to prevent a malfunction.

Viewing the System Log List

To view the system log list:

1.Press the LOG button or click the icon in the system control bar.

2.Set the [Start Date/Time] and [End Date/Time] to search.

•a/d/w/s: Moves to the options.

•w/s: Sets the selected option.

•OK: Selects option or confirms the setting.

3.Use a/dto see the previous or next log list.

4.Press the BACK button or click the [Close] button to exit the window.

NOTE

Refer to the following system log list.

No.

Log Message

 

 

1

Power On

 

 

2

Power Off

 

 

3

Login (Remote)

 

 

4

Logout (Remote)

 

 

5

Login (Local)

 

 

6

Logout (Local)

 

 

7

Configuration Changed

 

 

8

Configuration Imported

 

 

9

Factory Default Set

 

 

10

Power Recovery

 

 

11

Backup Started

 

 

12

Backup Finished

 

 

13

Backup Failed

 

 

14

Export Started

 

 

15

Export Finished

 

 

16

Export Failed

 

 

17

S/W Updated

 

 

18

HDD Damaged

 

 

19

HDD Added

 

 

20

HDD Deleted

 

 

21

HDD Formatted

 

 

22

HDD Changed

 

 

3

Installation

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Network Video Recorder Contact office for compliance of this product Regulatory Information FCC PartDisposal of your old appliance EEE Compliance with Directive. for Turkey onlyDisposal of waste batteries/accumulators Safety warnings and Cautions Safety Information Contents Emergency Using the playback control menu Using the Protect functionOutput Buzzer Group Authority UserFeatures AccessoriesIntroduction Rear Panel Front PanelRemote Control Connections PrecautionsBasic Connection Overview Line inputConnecting Display device Connecting Audio deviceConnecting USB device Connecting E-SATA device Connecting NetworkConnecting IP Camera Connecting Alarm Input and Alarm Output Connecting LKD1000 ControllerAlarm Input Data Transmission/ReceptionAlarm Output Installing the Hard Disk DriveAlarm device Terminal NoRecommended HDD Replacing the Hard Disk DriveSystem Operation System ShutdownMain Monitor Screen Selecting the Split mode Moving the Channels PositionChanging the order of cameras To Register Preset Positions Preset SettingsChanging to a Picture in a Preset Position To Clear the Preset PositionTo Tour The Preset Positions Using the Digital Zoom functionSetup for PTZ Cameras Export the recorded dataViewing the System Log List Using a mouse to set a menu Configuration menuViewing System Information Use the left mouse buttons to set the menuSetting the Menu Using the Remote Control Buttons System settingsProperties RemoteHow to register Ddns host name TCP/IPNetwork When you want to change Ddns host name Network StreamingDate/Time Controller Instant Backup UpdateUp to 2 TB Daily/Weekly backupMotion Setting Device settingsStream Setting Audio/Sensor settingTo register the IP device manually To register the IP device automaticallyDisplay settings StorageSequence Normal Schedule Recording Record settingsCopying from the Scheduled Data of the Channel Copying the Recording ScheduleCopying from the Scheduled Data of the Day Time you want to record. The color of the time block isSensor Event settingsMotion NotificationEmergency MailWhich you want to enable this system e.g. lgecommunity or User settingsOutput Group Authority BuzzerSetup Wizard settings UserStep Set date and time Instant Recording OperationInstant Playback Using the calendar icon to select a dateSearch and Playback Date and Time SearchBookmark/Protect Search Export SearchFunctions Available During Playback Remote ControlButton Stops playbackUsing the Protect function Using the playback control menuHow to select Protect section How to release the Protect sectionSymptoms Cause & Solution You can reboot the system as follows If you observe any of the following symptomsRecommended USB Memory list Recommended DevicesRecommended External Device list Maker Model Name CapacityExport Configuration Import/Export Device Instant backupSupported function list for device Supported IP Camera Audio/Video CodecTime zones Timezone nameTimezone 1st level 2nd level 3rd level Default Value Factory Default Factory Default Configuration SettingsYYYY/MM/DD Date Current DateDisplay Day Current day of the week Event OFF YESGroup ID Model LRN3040N Series Specifications
Top Page Image Contents