LG Electronics LRN3040N Series owner manual Display settings, Storage, Sequence

Page 30

30Installation

NOTE

•If you register the IP camera for plug and connect, [HTTP Port] and [RTSP Port] number per each channel are assigned as below.

CH	HTTP Port	RTSP Port

1	1080	1554

2	2080	2554

3	3080	3554

4	4080	4554

	3	• If you connect the IP Camera which uses PoE for Plug and
	3	Connect port, it takes 2 or 3 minutes. Wait a moment.
	Installation	Connect port, it takes 2 or 3 minutes. Wait a moment.
	Installation	• The information of IP camera for Plug and Connect port is not

		initialized if you use the [Factory Default] function.
		• The IP camera for Plug and Connect port cannot be registered
		to the system doubly.

Storage

•Overwrite: Sets whether you use Overwrighting function.

•Full Warning: When the HDD has overflowed a warning message is displayed.

•Auto Delete: Sets the auto delete date. If you set the auto delete date, the recorded data will be deleted except the data within the selected date period of time. The Auto Delete function is activated every 35 minutes.

•Storage Saving : Saves the storage space by reducing the quality of the recorded data.

•Format: Initializes the HDD (Hard Disk Drive). All data on the HDD will be erased.

•E-SATA : Selects the E-SATA device.

•Insert: Uses the selected E-SATA storage for recording data.

•Eject: Uses the selected E-SATA storage for data back-up.

Display settings

OSD

•Channel Name: Mark up to display or remove the channel name in the channel window.

•Channel Status: Mark up to display or remove the channel status in the channel window.

•Channel FPS: Mark up to displays or removes the channel FPS (Frame Per Seconds) in the channel window.

•Font Size: Selects the font size of characters such as the channel name and playback time which displayed on the channel window.

•Position: Selects the position of characters such as the channel name and playback time which displayed on the channel window.

Sequence

You can view all the channels in sequence in the selected screen division mode. You cannot use sequence mode with the 4 split.

•Main Dwell Time: Selects the channel sequence time for main monitor.

Image 30

Contents Network Video Recorder Regulatory Information FCC Part Contact office for compliance of this productDisposal of your old appliance EEE Compliance with Directive. for Turkey onlyDisposal of waste batteries/accumulators Safety warnings and Cautions Safety Information Contents Output Buzzer Using the playback control menu Using the Protect functionEmergency Group Authority UserFeatures AccessoriesIntroduction Front Panel Rear PanelRemote Control Basic Connection Overview PrecautionsConnections Line inputConnecting Display device Connecting Audio deviceConnecting USB device Connecting E-SATA device Connecting NetworkConnecting IP Camera Alarm Input Connecting LKD1000 ControllerConnecting Alarm Input and Alarm Output Data Transmission/ReceptionAlarm device Installing the Hard Disk DriveAlarm Output Terminal NoReplacing the Hard Disk Drive Recommended HDDSystem Operation System ShutdownMain Monitor Screen Selecting the Split mode Moving the Channels PositionChanging the order of cameras Changing to a Picture in a Preset Position Preset SettingsTo Register Preset Positions To Clear the Preset PositionSetup for PTZ Cameras Using the Digital Zoom functionTo Tour The Preset Positions Export the recorded dataViewing the System Log List Viewing System Information Configuration menuUsing a mouse to set a menu Use the left mouse buttons to set the menuProperties System settingsSetting the Menu Using the Remote Control Buttons RemoteHow to register Ddns host name TCP/IPNetwork When you want to change Ddns host name Network StreamingDate/Time Controller Update Instant BackupDaily/Weekly backup Up to 2 TBStream Setting Device settingsMotion Setting Audio/Sensor settingTo register the IP device automatically To register the IP device manuallyDisplay settings StorageSequence Record settings Normal Schedule RecordingCopying from the Scheduled Data of the Day Copying the Recording ScheduleCopying from the Scheduled Data of the Channel Time you want to record. The color of the time block isMotion Event settingsSensor NotificationMail EmergencyOutput Group Authority User settingsWhich you want to enable this system e.g. lgecommunity or BuzzerSetup Wizard settings UserStep Set date and time Operation Instant RecordingSearch and Playback Using the calendar icon to select a dateInstant Playback Date and Time SearchExport Search Bookmark/Protect SearchButton Remote ControlFunctions Available During Playback Stops playbackHow to select Protect section Using the playback control menuUsing the Protect function How to release the Protect sectionSymptoms Cause & Solution If you observe any of the following symptoms You can reboot the system as followsRecommended External Device list Recommended DevicesRecommended USB Memory list Maker Model Name CapacitySupported function list for device Device Instant backupExport Configuration Import/Export Supported IP Camera Audio/Video CodecTime zones Timezone nameTimezone Factory Default Configuration Settings 1st level 2nd level 3rd level Default Value Factory DefaultDate Current Date YYYY/MM/DDDisplay Day Current day of the week OFF YES EventGroup ID Specifications Model LRN3040N Series