LG Electronics LRN3040N Series owner manual Safety warnings and Cautions

Page 4

4Safety Information

1 SafetyInformation

Safety warnings and Cautions

The following are warnings and cautions for the safety of the users and for the prevention of any property damage. Please read the following carefully.

WARNING

•Turn off the system before installation. Do not plug in several electric devices to the same outlet. -- This may cause heating, fire, or electric shock.

•Do not place any liquid container on the system, such as water, coffee, or other beverage. -- If liquid is poured onto the system, it can cause a system breakdown or fire.

•Prevent the power cable from being severely bent or having pressure exerted on it by a heavy object. -- This may cause fire.

•Clean the dust around the system on a regular basis. When cleaning the system, always use a dry cloth. Do not use a wet cloth or other organic solvents.

-- This may damage the surface of the system and can cause a system breakdown or electric shock.

•Avoid any place with moisture, dust, or soot. -- This can cause fire or electric shock.

•When pulling the power cable from the plug, do so gently. Do not touch the plug with wet hands and avoid using the plug if the holes in the outlet are too loose.

-- This may cause fire or electric shock.

•Do not attempt to disassemble, repair, or modify the system on your own. It is extremely dangerous due to the high voltage running through the system.

-- This may cause fire, electric shock, or serious injury.

•Check for any danger signs such as a moist floor, a loosened or damaged power cable, or an unstable surface. If you encounter any problems, ask your dealer for assistance.

-- This may cause fire or electric shock.

•Keep a distance of at least 15 cm between the back of the system and the wall for the cables connected to the system otherwise, they may be bent, damaged, or cut.

-- This may cause fire, electric shock, or injury.

•Install the system in a cool place without direct sunlight and always maintain room temperature. Avoid candlelight and heat generating devices such as heaters. Keep the system away from places where many people pass.

-- This may cause fire.

•Install the system on a plain surface with sufficient air ventilation. Do not place the system on an elevated surface. -- This may cause system breakdown or serious injury.

•The power outlet must be placed on the ground, and the voltage range must be within 10 % of the voltage rate. Do not use the same outlet with a hair dryer, iron, refrigerator, or any heating appliances.

-- This may cause fire, over heating or electric shock.

•When the system’s battery is depleted, replace it with the same or equivalent type of battery specified by the manufacturer. Depleted batteries should be discarded according to the manufacturer’s instructions.

-- This may cause an explosion.

•If the system’s HDD exceeds its life span, you may not be able to recover any data stored inside the HDD. If the video on the system screen appears ‘damaged’ while playing a recording stored inside the system’s HDD, it must be replaced with a new one. Ask for an engineer’s assistance for HDD replacement from your dealer.

-- LG Electronics is not responsible for deleted data caused by user mishandling.

•PLEASE DO NOT MOUNT OR UN-MOUNT HDDs WHILE SYSTEM IS POWERED ON. -- This may cause system breakdown.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Network Video Recorder Regulatory Information FCC Part Contact office for compliance of this productEEE Compliance with Directive. for Turkey only Disposal of your old applianceDisposal of waste batteries/accumulators Safety warnings and Cautions Safety Information Contents Using the playback control menu Using the Protect function EmergencyOutput Buzzer Group Authority UserAccessories FeaturesIntroduction Front Panel Rear PanelRemote Control Precautions ConnectionsBasic Connection Overview Line inputConnecting Audio device Connecting Display deviceConnecting USB device Connecting Network Connecting E-SATA deviceConnecting IP Camera Connecting LKD1000 Controller Connecting Alarm Input and Alarm OutputAlarm Input Data Transmission/ReceptionInstalling the Hard Disk Drive Alarm OutputAlarm device Terminal NoReplacing the Hard Disk Drive Recommended HDDSystem Shutdown System OperationMain Monitor Screen Moving the Channels Position Selecting the Split modeChanging the order of cameras Preset Settings To Register Preset PositionsChanging to a Picture in a Preset Position To Clear the Preset PositionUsing the Digital Zoom function To Tour The Preset PositionsSetup for PTZ Cameras Export the recorded dataViewing the System Log List Configuration menu Using a mouse to set a menuViewing System Information Use the left mouse buttons to set the menuSystem settings Setting the Menu Using the Remote Control ButtonsProperties RemoteTCP/IP How to register Ddns host nameNetwork Network Streaming When you want to change Ddns host nameDate/Time Controller Update Instant BackupDaily/Weekly backup Up to 2 TBDevice settings Motion SettingStream Setting Audio/Sensor settingTo register the IP device automatically To register the IP device manuallyStorage Display settingsSequence Record settings Normal Schedule RecordingCopying the Recording Schedule Copying from the Scheduled Data of the ChannelCopying from the Scheduled Data of the Day Time you want to record. The color of the time block isEvent settings SensorMotion NotificationMail EmergencyUser settings Which you want to enable this system e.g. lgecommunity orOutput Group Authority BuzzerUser Setup Wizard settingsStep Set date and time Operation Instant RecordingUsing the calendar icon to select a date Instant PlaybackSearch and Playback Date and Time SearchExport Search Bookmark/Protect SearchRemote Control Functions Available During PlaybackButton Stops playbackUsing the playback control menu Using the Protect functionHow to select Protect section How to release the Protect sectionSymptoms Cause & Solution If you observe any of the following symptoms You can reboot the system as followsRecommended Devices Recommended USB Memory listRecommended External Device list Maker Model Name CapacityDevice Instant backup Export Configuration Import/ExportSupported function list for device Supported IP Camera Audio/Video CodecTimezone name Time zonesTimezone Factory Default Configuration Settings 1st level 2nd level 3rd level Default Value Factory DefaultDate Current Date YYYY/MM/DDDisplay Day Current day of the week OFF YES EventGroup ID Specifications Model LRN3040N Series
Top Page Image Contents