LG Electronics LRN3040N Series owner manual Record settings, Normal Schedule Recording

Installation

31

Record settings

Normal Schedule Recording

A Normal schedule recoding can be activated at preset times, in a repeating pattern on selected weekdays. The system can record according to a schedule set by the user. It can also record manually regardless of date and time. The recording can be made either continuously or triggered by events (Sensor and motion detection).

The recording schedule screen displays one day of the week showing the schedule of all channels over a 24-hour period. For each 1-hour cell block the recording method can be specified. The recording method for each block is shown in color for easy viewing.

Channel numbers

Time Line

Day of the Week

Recording mode

2. Select a recording mode.

•Gray (No recording): No schedule recording.

•Gold (Continuous recording): Recording starts automatically from the preset time.

•Red (Sensor event recording): Recording starts automatically when the sensor occurs within a designated time.

•Green (Motion event recording): Recording starts automatically when motion is detected within a designated time.

3

Installation

To Set a Recording Schedule for a Typical Day of the Week (Normal Schedule)

1. Select a day of the week.

•Yellow (Sensor+Motion recording): Recording starts automatically when the sensor signal has input or motion has been detected.

•Gold+Red (Continuous+Sensor event recording): Recording starts automatically from the preset time. When the sensor occurs within a designated time, changes the continuous recording mode to sensor event recording mode and recording starts automatically.

•Gold+Green (Continuous+Motion event recording): Recording starts automatically from the preset time. When the motion is detected within a designated time, changes the continuous recording mode to motion event recording mode and recording starts automatically.

•Gold+Yellow (Continuous+Sensor+Motion event recording): Recording starts automatically from the preset time. When the sensor signal has been input or motion has been detected, changes the continuous recording mode to sensor event recording mode or motion event recording mode and recording starts automatically.

NOTE

In case you set the motion recording setting on the channel of IP camera, the recording starts when Video content analysis event as well as Motion event is occurred.