LG Electronics LRN3040N Series PTZ Camera Control, Preset Settings, To Register Preset Positions

Page 19

Installation 19

PTZ Camera Control

You can control the cameras connected via Network.

1.Select the PTZ camera channel on the main monitor you want to control.

2.Press PTZ or click the icon that appears when the mouse is moved to PTZ camera's screen.

Virtual PTZ remote control is displayed on the main monitor.

3.Use each item to control the PTZ camera.

Button

Function

 

 

 

Displays the PTZ control guide.

 

 

 

Displays the setup menu of the PTZ

 

camera.

 

 

 

Minimizes PTZ virtual remote control.

 

 

 

Removes the PTZ virtual remote

 

control.

 

 

 

Use to pan/tilt the camera.

 

 

 

You can select the Pan/Tilt/Zoom

 

speed.

 

 

 

You can adjust the camera zoom.

 

 

 

You can adjust the focus of a camera

 

manually.

 

 

 

You can adjust the iris of a camera

 

manually.

 

 

 

Displays or disappear the preset

 

control options in the virtual PTZ

 

remote control

 

 

 

Displays the Selected Preset number.

 

 

 

To input the preset number.

 

 

y

To register preset positions.

 

r

To delete a memorized preset

position.

t

To move the camera to the preset

position.

u

To start a preset tour.

 

 

Confirm the preset position.

 

 

NOTE

You can use some options by clicking the right button of the mouse in PTZ camera control mode.

•PTZ Control Guide: Shows the guide for using the mouse.

•Exit: Exits from the PTZ camera control mode.

Preset Settings

Preset position is the function to register camera monitoring positions (preset positions) associated with position numbers. By entering the position numbers, you can move cameras to the preset positions.

NOTE

•To activate this function, you need to register the preset positions of the PTZ cameras.

•ONVIF preset may not be operated properly with this unit.

To Register Preset Positions

1.Move the camera to a point you wish by using the ,,, buttons.

2.Press SET or click the yicon.

3.Select the preset number you wish to register.

4.Press OK or click the icon. The position and its number are memorized.

5.Repeat steps 1 to 4 to add additional positions.

NOTE

Preset numbers from 0 to 255 are available on this unit but the actual preset range differs depending on PTZ cameras.

Changing to a Picture in a Preset Position

The following function is available only with cameras provided with the preset function. The preset function makes the combination camera move to the programmed preset position. It is necessary to program preset positions for the combination camera beforehand.

1.Press the MOVE button or click the ticon.

2.Use number buttons to enter the memorized preset position’s

index number then press OK or click the icon. The camera moves to the preset position and the picture of the camera in that position appears on the monitor.

To Clear the Preset Position

You can clear a memorized preset position.

1.Press the CLEAR button or Click the ricon.

2.Use number buttons to enter the memorized preset index

number then press OK or Click the icon to clear the preset positions.

NOTE

This function may not be available depending on PTZ cameras.

3

Installation

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Network Video Recorder Contact office for compliance of this product Regulatory Information FCC PartEEE Compliance with Directive. for Turkey only Disposal of your old applianceDisposal of waste batteries/accumulators Safety warnings and Cautions Safety Information Contents Group Authority User Using the playback control menu Using the Protect functionEmergency Output BuzzerAccessories FeaturesIntroduction Rear Panel Front PanelRemote Control Line input PrecautionsConnections Basic Connection OverviewConnecting Audio device Connecting Display deviceConnecting USB device Connecting Network Connecting E-SATA deviceConnecting IP Camera Data Transmission/Reception Connecting LKD1000 ControllerConnecting Alarm Input and Alarm Output Alarm InputTerminal No Installing the Hard Disk DriveAlarm Output Alarm deviceRecommended HDD Replacing the Hard Disk DriveSystem Shutdown System OperationMain Monitor Screen Moving the Channels Position Selecting the Split modeChanging the order of cameras To Clear the Preset Position Preset SettingsTo Register Preset Positions Changing to a Picture in a Preset PositionExport the recorded data Using the Digital Zoom functionTo Tour The Preset Positions Setup for PTZ CamerasViewing the System Log List Use the left mouse buttons to set the menu Configuration menuUsing a mouse to set a menu Viewing System InformationRemote System settingsSetting the Menu Using the Remote Control Buttons PropertiesTCP/IP How to register Ddns host nameNetwork Network Streaming When you want to change Ddns host nameDate/Time Controller Instant Backup UpdateUp to 2 TB Daily/Weekly backupAudio/Sensor setting Device settingsMotion Setting Stream SettingTo register the IP device manually To register the IP device automaticallyStorage Display settingsSequence Normal Schedule Recording Record settingsTime you want to record. The color of the time block is Copying the Recording ScheduleCopying from the Scheduled Data of the Channel Copying from the Scheduled Data of the DayNotification Event settingsSensor MotionEmergency MailBuzzer User settingsWhich you want to enable this system e.g. lgecommunity or Output Group AuthorityUser Setup Wizard settingsStep Set date and time Instant Recording OperationDate and Time Search Using the calendar icon to select a dateInstant Playback Search and PlaybackBookmark/Protect Search Export SearchStops playback Remote ControlFunctions Available During Playback ButtonHow to release the Protect section Using the playback control menuUsing the Protect function How to select Protect sectionSymptoms Cause & Solution You can reboot the system as follows If you observe any of the following symptomsMaker Model Name Capacity Recommended DevicesRecommended USB Memory list Recommended External Device listSupported IP Camera Audio/Video Codec Device Instant backupExport Configuration Import/Export Supported function list for deviceTimezone name Time zonesTimezone 1st level 2nd level 3rd level Default Value Factory Default Factory Default Configuration SettingsYYYY/MM/DD Date Current DateDisplay Day Current day of the week Event OFF YESGroup ID Model LRN3040N Series Specifications
Top Page Image Contents