LG Electronics LRN3040N Series owner manual Safety Information

Page 5

Safety Information

5

 

 

CAUTION

Please beware of the following precautions before installing the system.

•Avoid positioning the product in any place where the unit may come into contact with moisture, dust, or soot.

•Avoid placing in direct sunlight or near heating appliances.

•Keep the product away from electric sparks or magnetic substances.

•Do not place any conductive material through the ventilation grills.

•Keep the system turned off before installation.

•Ensure enough space is left for cable connections.

•Place the system on a solid surface with sufficient air ventilation. Avoid any surface that vibrates.

•Placing the system near electronic devices such as a radio or a TV may cause the product to breakdown.

•Do not disassemble the product without seeking assistance from LG Electronics.

•Prevent any substances from being inserted into the system. -- This may cause system breakdown.

•Install the system in a place with sufficient air ventilation.

-- Keep at least 15 cm distance between the back of the system and the wall, and at least 5 cm distance between the side of the system and the wall.

•Do not install the system in a place with high magnetic, electric wave, or wireless devices such as a radio or a TV. -- Do not install the system in a place with magnetic objects, electric frequencies, or vibration.

•Do not place any heavy object on the system. -- This may cause system breakdown.

•Install the system on a stable, level surface. -- The system may not operate properly.

•Install the system in a place with appropriate moisture and temperature levels.

-- Avoid installing the system in a place with high (over 40 °C) or low (under 0 °C) temperature.

•The system can be damaged from a strong impact or vibration. Avoid throwing objects within the vicinity of the system.

•Avoid direct sunlight or any heating appliances.

-- Recommended operating temperature is over 0 °C (32 °F).

•Ventilate the air inside the system operation room, and tighten the system cover firmly.

-- System breakdown may be caused by an inappropriate environment. It is recommended to use AVR (Automatic Voltage Regulator) for a stable power supply. It is recommended to coil the core-ferrite around the connector of the system to avoid electromagnetic interference.

•The outlet must be placed on the ground.

•If there is strange sound or smell, unplug the power cable immediately and contact the service center. -- This may cause fire or electric shock.

•In order to maintain stable system performance, have your system checked regularly by the service center. -- LG Electronics is not held responsible for system breakdown caused by user mishandling.

-- There is a risk of explosion if a battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

•Use the mouse which is supplied from this unit.

-- Otherwise, the system may not operate properly.

•Do not connect more than 3 ea of PoE+ IP camera at once. (Up 9 to 2 ea available) -- The system may not operate properly.

•Do not overturn the product during use.

1 SafetyInformation

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Network Video Recorder Contact office for compliance of this product Regulatory Information FCC PartDisposal of waste batteries/accumulators Disposal of your old applianceEEE Compliance with Directive. for Turkey only Safety warnings and Cautions Safety Information Contents Emergency Using the playback control menu Using the Protect functionOutput Buzzer Group Authority UserIntroduction FeaturesAccessories Rear Panel Front PanelRemote Control Connections PrecautionsBasic Connection Overview Line inputConnecting USB device Connecting Display deviceConnecting Audio device Connecting IP Camera Connecting E-SATA deviceConnecting Network Connecting Alarm Input and Alarm Output Connecting LKD1000 ControllerAlarm Input Data Transmission/ReceptionAlarm Output Installing the Hard Disk DriveAlarm device Terminal NoRecommended HDD Replacing the Hard Disk DriveMain Monitor Screen System OperationSystem Shutdown Changing the order of cameras Selecting the Split modeMoving the Channels Position To Register Preset Positions Preset SettingsChanging to a Picture in a Preset Position To Clear the Preset PositionTo Tour The Preset Positions Using the Digital Zoom functionSetup for PTZ Cameras Export the recorded dataViewing the System Log List Using a mouse to set a menu Configuration menuViewing System Information Use the left mouse buttons to set the menuSetting the Menu Using the Remote Control Buttons System settingsProperties RemoteNetwork How to register Ddns host nameTCP/IP Date/Time Controller When you want to change Ddns host nameNetwork Streaming Instant Backup UpdateUp to 2 TB Daily/Weekly backupMotion Setting Device settingsStream Setting Audio/Sensor settingTo register the IP device manually To register the IP device automaticallySequence Display settingsStorage Normal Schedule Recording Record settingsCopying from the Scheduled Data of the Channel Copying the Recording ScheduleCopying from the Scheduled Data of the Day Time you want to record. The color of the time block isSensor Event settingsMotion NotificationEmergency MailWhich you want to enable this system e.g. lgecommunity or User settingsOutput Group Authority BuzzerStep Setup Wizard settingsUser Set date and time Instant Recording OperationInstant Playback Using the calendar icon to select a dateSearch and Playback Date and Time SearchBookmark/Protect Search Export SearchFunctions Available During Playback Remote ControlButton Stops playbackUsing the Protect function Using the playback control menuHow to select Protect section How to release the Protect sectionSymptoms Cause & Solution You can reboot the system as follows If you observe any of the following symptomsRecommended USB Memory list Recommended DevicesRecommended External Device list Maker Model Name CapacityExport Configuration Import/Export Device Instant backupSupported function list for device Supported IP Camera Audio/Video CodecTimezone Time zonesTimezone name 1st level 2nd level 3rd level Default Value Factory Default Factory Default Configuration SettingsYYYY/MM/DD Date Current DateDisplay Day Current day of the week Event OFF YESGroup ID Model LRN3040N Series Specifications
Top Page Image Contents