LG Electronics LRN3040N Series owner manual User settings, Output Group Authority, Buzzer

Page 35

Installation 35

	which you want to enable this system (e.g. lgecommunity or	User settings
	• Trap Community String: Specifies the SNMP trap community in
	public).
	Output	Group Authority
	Output	You can register a new user group with various access rights.

3

Installation

•Relay Off

-- ALARM ACKNOWLEDGE: Use the ALM.OFF button to stop alarm.

-- POST-ALARM TIME: The alarm is stopped after post-alarm time.

•System Alarm Out: Outputs the alarm (relay) signal via the selected alarm out terminal number when the system has some problem. If you do not use this function, select [NONE] option.

•HDD Fail Alarm Out: Outputs the alarm (relay) signal via the selected alarm out terminal number when the HDD is failed. If you do not use this function, select [NONE] option.

Buzzer

Marks up when you want to activate the selected option.

•Group ID: Select the group ID to assign authority.

-- GUEST: The GUEST group has the limited authority of the system. Users in this group are available to see the live image and to set the covert function of the channel.

-- ADMINISTRATOR: The ADMINISTRATOR group has the unlimited authority of the system. Users in this group are available to use all of the functions.

-- [Group 01] to [Group 08]: Users in this group are available to set the authority of the function manually.

NOTE

The GUEST and ADMINISTRATOR group are set initially for the authority. You cannot change the initial settings and group name (GUEST and ADMINISTRATOR).

•Group Name: If you select one of the group numbers from the Group ID option, you can register the group name. Enter the group name.

-- Setup, Search/Play, Export, PTZ, Power Off, Instant Record: Set the authority for the selected group. Mark up the option to activate it.

•Main Channel: Selects the channel to allow the operation for the group user. The LG logo is displayed on the covert channel(s).

•Sensor: Makes a sound when a sensor occurs.

•Motion : Makes a sound when a motion is detected.

•System: Makes a sound when the HDD has a bad sector.

NOTE

•Data cannot be saved in HDD which is occurred bad sector.

•When HDD has bad hold, can jot operate normally. Replace the HDD immediately .

Image 35

Contents Network Video Recorder Contact office for compliance of this product Regulatory Information FCC PartDisposal of waste batteries/accumulators Disposal of your old applianceEEE Compliance with Directive. for Turkey only Safety warnings and Cautions Safety Information Contents Group Authority User Using the playback control menu Using the Protect functionEmergency Output BuzzerIntroduction FeaturesAccessories Rear Panel Front PanelRemote Control Line input PrecautionsConnections Basic Connection OverviewConnecting USB device Connecting Display deviceConnecting Audio device Connecting IP Camera Connecting E-SATA deviceConnecting Network Data Transmission/Reception Connecting LKD1000 ControllerConnecting Alarm Input and Alarm Output Alarm InputTerminal No Installing the Hard Disk DriveAlarm Output Alarm deviceRecommended HDD Replacing the Hard Disk DriveMain Monitor Screen System OperationSystem Shutdown Changing the order of cameras Selecting the Split modeMoving the Channels Position To Clear the Preset Position Preset SettingsTo Register Preset Positions Changing to a Picture in a Preset PositionExport the recorded data Using the Digital Zoom functionTo Tour The Preset Positions Setup for PTZ CamerasViewing the System Log List Use the left mouse buttons to set the menu Configuration menuUsing a mouse to set a menu Viewing System InformationRemote System settingsSetting the Menu Using the Remote Control Buttons PropertiesNetwork How to register Ddns host nameTCP/IP Date/Time Controller When you want to change Ddns host nameNetwork Streaming Instant Backup UpdateUp to 2 TB Daily/Weekly backupAudio/Sensor setting Device settingsMotion Setting Stream SettingTo register the IP device manually To register the IP device automaticallySequence Display settingsStorage Normal Schedule Recording Record settingsTime you want to record. The color of the time block is Copying the Recording ScheduleCopying from the Scheduled Data of the Channel Copying from the Scheduled Data of the DayNotification Event settingsSensor MotionEmergency MailBuzzer User settingsWhich you want to enable this system e.g. lgecommunity or Output Group AuthorityStep Setup Wizard settingsUser Set date and time Instant Recording OperationDate and Time Search Using the calendar icon to select a dateInstant Playback Search and PlaybackBookmark/Protect Search Export SearchStops playback Remote ControlFunctions Available During Playback ButtonHow to release the Protect section Using the playback control menuUsing the Protect function How to select Protect sectionSymptoms Cause & Solution You can reboot the system as follows If you observe any of the following symptomsMaker Model Name Capacity Recommended DevicesRecommended USB Memory list Recommended External Device listSupported IP Camera Audio/Video Codec Device Instant backupExport Configuration Import/Export Supported function list for deviceTimezone Time zonesTimezone name 1st level 2nd level 3rd level Default Value Factory Default Factory Default Configuration SettingsYYYY/MM/DD Date Current DateDisplay Day Current day of the week Event OFF YESGroup ID Model LRN3040N Series Specifications