Nikon 3300, 3367 Using an Optional Lens Hood, Other Settings, Lens Care, Attaching a Lens Hood

■Using an Optional Lens Hood

Lens hoods protect the lens and block stray light that would otherwise cause flare or ghosting.

Attaching a Lens Hood

•Align the lens hood lock mark (—{) with the focal length mark () on the lens (e).

•Vignetting may occur if the hood is not correctly attached.

•The hood can be reversed and mounted on the lens when not in use.

■Other Settings

Use the camera to:

• Adjust aperture

• Control focus

• Vibration Reduction (NORMAL/ACTIVE/OFF) This lens supports both normal and active vibration reduction.

■Lens Care

•When using an optional lens hood, do not pick up or hold the lens or camera using only the

hood.

•Keep the CPU contacts clean.

•Use a blower to remove dust and lint from the lens surfaces. To remove smudges and fingerprints, apply a small amount of ethanol or lens cleaner to a soft, clean cotton cloth or lens- cleaning tissue and clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass with your fingers.

•Never use organic solvents such as paint thinner or benzene to clean the lens.

•The lens hood or NC filters can be used to protect the front lens element.

•Attach the front and rear caps when the lens is not in use.

•If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.

11