
Others
| Symptom | Cause and/or corrective actions | 
The supplied Remote Commander does not work.
•COMMANDER is set to OFF in the menu system. m Set it to ON. (p. 32)
•Something is blocking the infrared rays. m Remove the obstacle.
•The battery is not inserted with the correct polarity. m Insert the battery with the correct polarity. (p. 113)
•The batteries are dead.
m Insert new ones. (p. 113)
| The CHARGE lamp flashes after you | • The camcorder is not malfunctioning. | 
| charge the battery pack installed in the | 
 | 
| camcorder. | 
 | 
Additional
No function works though the power is on.
•Disconnect the connection plug on the battery pack or on the AC power adaptor, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the RESET button on the back of the battery compatment lid using a 
information / Información
AC power adaptor
| Symptom | Corrective actions | 
| The VTR/CAMERA or CHARGE lamp | • Disconnect the AC power cord. After about 1 minute, | 
| does not light. | reconnect the AC power cord. (p. 7) | 
| The CHARGE lamp flashes. | • See the chart on the next page. | 
Continued to the next page
adicional
99