Panasonic HD3700H ∑ Setting mode display area, ∑ Remaining tape time, ∑ User file display

Page 10

HOME menu displays

∑Setting mode display area

The displays appearing in this area indicate the modes which have been set.

CUT: Appears when the audio cut editing mode is set.

XFADE: Appears when the audio cross-fade editing mode is set.

VFADE: Appears when the audio V fade editing mode is set.

INTRP: Appears when the time code interpolation mode (in which the time code cannot be read out accurate- ly) is established.

DF:Appears when the drop frame mode is set.

F1/F2: Indicates the field numbers for VITC.

EMPHASIS: Appears when pre-emphasis is applied to the audio signals.

TRACK VAR: Appears when an adjustment has been made with the tracking deviated from the fixed position.

TRACK OPT: Appears when an optimizing adjustment has been made for the tracking.

∑Remaining tape time

This indicates the remaining tape time as the tape travels.

∑User file display

This indicates the number of file which is called when the power is switched on or the currently called user file. If there is a discrep- ancy between the contents of the user file displays and even one current setting, “¢” will appear in front of the file number.

∑Time code displays

These indicate the time code values.

CTL1: Normal control signal

CTL2: Control signal (which cannot be reset)

LTCR: LTC readout

LUBR: LTC user bit readout

VTCR: VITC readout

VUBR: VITC user bit readout

TCG: Value generated by generator

LUBG: Value of LTC user bit generated

VUBG: Value of VITC user bit generated

E-TC:External time code

E-UB:External user bit

∑Checking the value generated by generator

INPUT CHECK	Press the INPUT CHECK key. While the key is held down, the
	Press the INPUT CHECK key. While the key is held down, the
	value generated by the generator is displayed.

TCG

00 : 41 : 07 : 04

– 10 –

Image 10

Contents Operating Instructions SoftwareContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turning on the power Turn on the power Home menu is displayedCH1 AES Home menu displays∑ Display lamps CH1 SERSD Free HD FreeDual ∑ User file display ∑ Setting mode display area∑ Remaining tape time ∑ Time code displays∑ Setting the initial value for the time code 00 00 00∑ Setting and checking the cue time Press the 4 cursor key Cue time now appears in reverse videoHome menu This menu is displayed by pressing the following key HomeKey Key designation Description Free ALL∑ Pre-read editing SD SDI SD SDI OUTHome SET UP menu This menu is displayed by pressing the following keys HomeFine FieldFRAME11 CoarseF12 Still After pressing the F11 key, turn the Adjust controlPreroll F13 Stby OFFCenter cursor key Press the ENT key. The setting is now entered∑ Reference Cursor key∑ Programmed play function Video in menu This menu is displayed by pressing the following keyMULT-BST INT SGRamp BlackVideo OUT HD menu BLACK.L F3 PRConvert Video OUT HD SET UP menu This menu is displayed by pressing the following keysInterp Serial SYS PhaseLine Conv OFFVideo OUT HD SET UP State menu EemodeVideo OUT SET UP State menu ∑ Selecting the TAPE/EE output signalsVideo OUT SD menu Cmpst Transfers the VTR to the Video OUT SD SET UP CompositeTransfers the VTR to the Video OUT SD SET UP SDI menu Menu screenVideo OUT SD SET UP Composite menu SYS H Comb FIL1SYS SC Line BLK2Or Audio OUT F8 F12 Video OUT SD SET UP Cmpst State menuThrough The E-E through mode AV minimum delay mode Is established∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu With the 480/59.94i format With the 480/59.94p format1 Adjustment can be made fromFINE/COARSE With the 576/50i format1ALL OFF Video OUT SET UP Line BLK video output line blanking menuALL on Line BLK∑ Setting the line blanking Move the cursor and select the lines to be blankedVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Sdtohd Video OUT Convert menuHdtosd HdtohdFith Video OUT Convert Hdtosd menuFitv Standard Wide NarrowConverter Video OUT Convert Sdtohd menuSelects the frequency bandwidth of the up-converter output Controls the enhancement adjustment of the converter output Video OUT Convert Hdtohd menuAudio in menu PCM CUECH-MIX Audio in PCM Input Select menu Digital AnalogDigital F10 CH-6 Selects the signals of the analog CH2 inputCH6 Selection is made in line with the CH5 setting using ANA CH2Audio in CUE Input Select menu Tape Mixes the playback signalsNo mixing Audio in SET UP menu This menu is displayed by pressing the following keys AudioTone ∑ Switching the audio level meter scaleFr in increments of 1/10th of a frame CH-MIX on Audio in CH-MIX Select menuSelect CH-MIX OFF∑ Mix-and-record Sound output based on VTR’s mode and F6, F7 key statuses ONotesNAudio OUT menu Monitor SDI AsignAudio OUT Monitor menu VAR ShtlMoni ADDAudio OUT SET UP menu VAR Proc F1 A/V PhaseJOG Proc PB FadeTransfers the VTR to the Audio OUT SET UP State menu PCM The style is set to the normal PCM audio modeData The style is set to the data mode compressed audio Dolby-E∑ Fade function Audio OUT SET UP State menu F3-F7Video OUT SET UP State menu Audio OUT SDI Asign menu CH1T4 SdtosdTC/CHR menu LTC INTEXT LTC VTCTC.UB TC.STIntense ∑ Time code displays and VTR’s operating modes Time code displays CTL1 Control signal∑ Changing the superimposing position TCG∑ Error information displays Table of user bit settings