Panasonic HD3700H operating instructions CH1T4, Sdtosd

Page 69

AUDIO OUT SDI ASIGN menu

Key	Key designation		Description
F1	HD_TO_HD	Selects the channels whose signals are to be output to HD SDI
	CH1T4	embedded audio channels 1 through 4.
		CH1T4: The signals of CH1 through CH4 are output.
		CH5T8: The signals of CH5 through CH8 are output.
		OFF:	No signals are output.
F2	HD_TO_HD	Selects the channels whose signals are to be output to HD SDI
	CH5T8°	embedded audio channels 5 through 8.
		CH1T4: The signals of CH1 through CH4 are output.
		CH5T8: The signals of CH5 through CH8 are output.
		OFF:	No signals are output.

F3	——

F4	HD_TO_SD	Selects the channels whose signals are to be output to SD SDI
	CH1T4	embedded audio channels 1 through 4.
		CH1T4: The signals of CH1 through CH4 are output.
		CH5T8: The signals of CH5 through CH8 are output.
		OFF:	No signals are output.
F5–F7	——

F8	EXIT	Returns the VTR to the AUDIO OUT menu screen.

F9	SD_TO_HD	Selects the channels whose signals are to be output to HD SDI
	CH5T8°	embedded audio channels 5 through 8.
		CH1T4: The signals of CH1 through CH4 are output.
		OFF:	No signals are output.
F10	SD_TO_HD	Selects the channels whose signals are to be output to HD SDI
	CH1T4	embedded audio channels 1 through 4.
		CH1T4: The signals of CH1 through CH4 are output.
		OFF:	No signals are output.

F11–12	——

F13	SD_TO_SD	Selects the channels whose signals are to be output to SD SDI
	CH1T4	embedded audio channels 1 through 4.
		CH1T4: The signals of CH1 through CH4 are output.
		OFF:	No signals are output.

°This setting is not displayed when the digital sound is in the 4-channel format.

– 69 –

Image 69

Contents Software Operating InstructionsContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turn on the power Home menu is displayed Turning on the power∑ Display lamps Home menu displaysCH1 AES CH1 SERHD Free SD FreeDual ∑ Remaining tape time ∑ Setting mode display area∑ User file display ∑ Time code displays00 00 00 ∑ Setting the initial value for the time codePress the 4 cursor key Cue time now appears in reverse video ∑ Setting and checking the cue timeThis menu is displayed by pressing the following key Home Home menuKey Key designation Description ALL FreeSD SDI SD SDI OUT ∑ Pre-read editingThis menu is displayed by pressing the following keys Home Home SET UP menuFRAME11 FieldFine CoarsePreroll After pressing the F11 key, turn the Adjust controlF12 Still F13 Stby OFF∑ Reference Press the ENT key. The setting is now enteredCenter cursor key Cursor key∑ Programmed play function This menu is displayed by pressing the following key Video in menuRamp INT SGMULT-BST BlackVideo OUT HD menu F3 PR BLACK.LConvert This menu is displayed by pressing the following keys Video OUT HD SET UP menuLine Conv Serial SYS PhaseInterp OFFEemode Video OUT HD SET UP State menu∑ Selecting the TAPE/EE output signals Video OUT SET UP State menuVideo OUT SD menu Transfers the VTR to the Video OUT SD SET UP SDI menu Transfers the VTR to the Video OUT SD SET UP CompositeCmpst Menu screenVideo OUT SD SET UP Composite menu SYS SC Comb FIL1SYS H Line BLK2Through The E-E through mode AV minimum delay mode Video OUT SD SET UP Cmpst State menuOr Audio OUT F8 F12 Is established∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu FINE/COARSE With the 480/59.94p format1 Adjustment can be made fromWith the 480/59.94i format With the 576/50i format1ALL on Video OUT SET UP Line BLK video output line blanking menuALL OFF Line BLKMove the cursor and select the lines to be blanked ∑ Setting the line blankingVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Hdtosd Video OUT Convert menuSdtohd HdtohdFitv Video OUT Convert Hdtosd menuFith Standard Wide NarrowVideo OUT Convert Sdtohd menu ConverterSelects the frequency bandwidth of the up-converter output Video OUT Convert Hdtohd menu Controls the enhancement adjustment of the converter outputAudio in menu CUE PCMCH-MIX Audio in PCM Input Select menu Analog DigitalDigital CH6 Selection is made in line with the CH5 setting using Selects the signals of the analog CH2 inputF10 CH-6 ANA CH2Audio in CUE Input Select menu Mixes the playback signals TapeNo mixing This menu is displayed by pressing the following keys Audio Audio in SET UP menu∑ Switching the audio level meter scale ToneFr in increments of 1/10th of a frame Select Audio in CH-MIX Select menuCH-MIX on CH-MIX OFF∑ Mix-and-record ONotesN Sound output based on VTR’s mode and F6, F7 key statusesAudio OUT menu SDI Asign MonitorAudio OUT Monitor menu Moni ShtlVAR ADDAudio OUT SET UP menu JOG Proc F1 A/V PhaseVAR Proc PB FadeData The style is set to the data mode compressed audio PCM The style is set to the normal PCM audio modeTransfers the VTR to the Audio OUT SET UP State menu Dolby-E∑ Fade function F3-F7 Audio OUT SET UP State menuVideo OUT SET UP State menu Audio OUT SDI Asign menu Sdtosd CH1T4TC/CHR menu EXT LTC INTLTC VTCTC.ST TC.UBIntense ∑ Changing the superimposing position Time code displays CTL1 Control signal∑ Time code displays and VTR’s operating modes TCG∑ Error information displays Table of user bit settings