Panasonic HD3700H operating instructions Video OUT Convert Sdtohd menu, Converter

Page 44

VIDEO OUT CONVERT SD_TO_HD menu

(This menu appears when the AJ-UDC3700P HD-SD format converter board, an optional accessory, has been installed.)

This menu is displayed by pressing the following keys: VIDEO OUT ) F10 ) F2

F13

F12

F11

F10

F9

F1

F2

F3

F4

F5

F6

F7

F8

Key

Key designation

Description

F1

MODE

Selects the aspect ratio at which signals are output from the up-

converter.

FIT_V:

Changes the magnification by matching the input size

to the output size along the perpendicular axis. (The

aspect ratio remains the same.)

FIT_H:

Changes the magnification by matching the input size

to the output size along the horizontal axis. (The

aspect ratio remains the same.)

FIT_HV: Changes the magnification by matching the input size

to the output size along the horizontal and

perpendicular axes. (The aspect ratio may be

distorted.)

F2

RESPONSE

Selects the frequency bandwidth of the up-converter output

signals.

STANDARD:

WIDE:

NARROW:

F3

ENHANCE

Controls the enhancement adjustment of the up-converter output

signals.

6dB:

3dB:

1.5dB:

0dB:

F4–F7

——

F8

EXIT

Returns the VTR to the VIDEO OUT CONVERT menu screen.

F9–F13

——

– 44 –

Image 44

Contents Operating Instructions SoftwareContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turning on the power Turn on the power Home menu is displayedHome menu displays ∑ Display lampsCH1 AES CH1 SERDual HD FreeSD Free ∑ Setting mode display area ∑ Remaining tape time∑ User file display ∑ Time code displays∑ Setting the initial value for the time code 00 00 00∑ Setting and checking the cue time Press the 4 cursor key Cue time now appears in reverse videoHome menu This menu is displayed by pressing the following key HomeKey Key designation Description Free ALL∑ Pre-read editing SD SDI SD SDI OUTHome SET UP menu This menu is displayed by pressing the following keys HomeField FRAME11Fine CoarseAfter pressing the F11 key, turn the Adjust control PrerollF12 Still F13 Stby OFFPress the ENT key. The setting is now entered ∑ ReferenceCenter cursor key Cursor key∑ Programmed play function Video in menu This menu is displayed by pressing the following keyINT SG RampMULT-BST BlackVideo OUT HD menu Convert F3 PRBLACK.L Video OUT HD SET UP menu This menu is displayed by pressing the following keysSerial SYS Phase Line ConvInterp OFFVideo OUT HD SET UP State menu EemodeVideo OUT SET UP State menu ∑ Selecting the TAPE/EE output signalsVideo OUT SD menu Transfers the VTR to the Video OUT SD SET UP Composite Transfers the VTR to the Video OUT SD SET UP SDI menuCmpst Menu screenVideo OUT SD SET UP Composite menu Comb FIL1 SYS SCSYS H Line BLK2Video OUT SD SET UP Cmpst State menu Through The E-E through mode AV minimum delay modeOr Audio OUT F8 F12 Is established∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu With the 480/59.94p format1 Adjustment can be made from FINE/COARSEWith the 480/59.94i format With the 576/50i format1Video OUT SET UP Line BLK video output line blanking menu ALL onALL OFF Line BLK∑ Setting the line blanking Move the cursor and select the lines to be blankedVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Video OUT Convert menu HdtosdSdtohd HdtohdVideo OUT Convert Hdtosd menu FitvFith Standard Wide NarrowSelects the frequency bandwidth of the up-converter output Video OUT Convert Sdtohd menuConverter Controls the enhancement adjustment of the converter output Video OUT Convert Hdtohd menuAudio in menu CH-MIX CUEPCM Audio in PCM Input Select menu Digital AnalogDigital Selects the signals of the analog CH2 input CH6 Selection is made in line with the CH5 setting usingF10 CH-6 ANA CH2Audio in CUE Input Select menu No mixing Mixes the playback signalsTape Audio in SET UP menu This menu is displayed by pressing the following keys AudioFr in increments of 1/10th of a frame ∑ Switching the audio level meter scaleTone Audio in CH-MIX Select menu SelectCH-MIX on CH-MIX OFF∑ Mix-and-record Sound output based on VTR’s mode and F6, F7 key statuses ONotesNAudio OUT menu Monitor SDI AsignAudio OUT Monitor menu Shtl MoniVAR ADDAudio OUT SET UP menu F1 A/V Phase JOG ProcVAR Proc PB FadePCM The style is set to the normal PCM audio mode Data The style is set to the data mode compressed audioTransfers the VTR to the Audio OUT SET UP State menu Dolby-E∑ Fade function Audio OUT SET UP State menu F3-F7Video OUT SET UP State menu Audio OUT SDI Asign menu CH1T4 SdtosdTC/CHR menu INT EXT LTCLTC VTCIntense TC.STTC.UB Time code displays CTL1 Control signal ∑ Changing the superimposing position∑ Time code displays and VTR’s operating modes TCG∑ Error information displays Table of user bit settings