Panasonic HD3700H ∑ Changing the superimposing position, Time code displays CTL1 Control signal

Page 73

TC/CHR menu

∑Changing the superimposing position

(1)Move the position using the cursor keys.

Center cursor key

Cursor keys

≥When a cursor key is held down, the cursor will move more quickly.

≥When the center cursor key is pressed, the superimposing re- turns to its initial position.

∑Time code displays and VTR’s operating modes

Display the time codes and VTR’s operating modes as required.

Time code displays
CTL1: Control signal 1	TCG:	Value generated by time code generator
CTL2: Control signal 2	LUBG: Value of LTC user bit generated
LTCR: LTC time code readout value	VUBG: Value of VITC user bit generated
LUBR: LTC user bit readout value	EXTC: External time code value
VTCR: VITC time code readout value	EXUB: External user bit value
VUBR: VITC user bit readout value

≥The colon (“:”) between the seconds and frames denotes the readout mode of the time code reader.

Hours	Minutes		Seconds		Frames
;	;	;			;
∑∑	: ∑∑	: ∑∑		:	∑∑. <Blinking display: Time code cannot be read out.


					[ ]: First field
					[. ]: Second field

				[: ]: Time code can be read out or TCG value is displayed.
				[	]: Time code cannot be read out.

[. ]: DF mode ON

[: ]: DF mode OFF

– 73 –

Image 73

Contents Software Operating InstructionsContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turn on the power Home menu is displayed Turning on the power∑ Display lamps Home menu displaysCH1 AES CH1 SERSD Free HD FreeDual ∑ Remaining tape time ∑ Setting mode display area∑ User file display ∑ Time code displays00 00 00 ∑ Setting the initial value for the time codePress the 4 cursor key Cue time now appears in reverse video ∑ Setting and checking the cue timeThis menu is displayed by pressing the following key Home Home menuKey Key designation Description ALL FreeSD SDI SD SDI OUT ∑ Pre-read editingThis menu is displayed by pressing the following keys Home Home SET UP menuFRAME11 FieldFine CoarsePreroll After pressing the F11 key, turn the Adjust controlF12 Still F13 Stby OFF∑ Reference Press the ENT key. The setting is now enteredCenter cursor key Cursor key∑ Programmed play function This menu is displayed by pressing the following key Video in menuRamp INT SGMULT-BST BlackVideo OUT HD menu BLACK.L F3 PRConvert This menu is displayed by pressing the following keys Video OUT HD SET UP menuLine Conv Serial SYS PhaseInterp OFFEemode Video OUT HD SET UP State menu∑ Selecting the TAPE/EE output signals Video OUT SET UP State menuVideo OUT SD menu Transfers the VTR to the Video OUT SD SET UP SDI menu Transfers the VTR to the Video OUT SD SET UP CompositeCmpst Menu screenVideo OUT SD SET UP Composite menu SYS SC Comb FIL1SYS H Line BLK2Through The E-E through mode AV minimum delay mode Video OUT SD SET UP Cmpst State menuOr Audio OUT F8 F12 Is established∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu FINE/COARSE With the 480/59.94p format1 Adjustment can be made fromWith the 480/59.94i format With the 576/50i format1ALL on Video OUT SET UP Line BLK video output line blanking menuALL OFF Line BLKMove the cursor and select the lines to be blanked ∑ Setting the line blankingVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Hdtosd Video OUT Convert menuSdtohd HdtohdFitv Video OUT Convert Hdtosd menuFith Standard Wide NarrowConverter Video OUT Convert Sdtohd menuSelects the frequency bandwidth of the up-converter output Video OUT Convert Hdtohd menu Controls the enhancement adjustment of the converter outputAudio in menu PCM CUECH-MIX Audio in PCM Input Select menu Digital AnalogDigital CH6 Selection is made in line with the CH5 setting using Selects the signals of the analog CH2 inputF10 CH-6 ANA CH2Audio in CUE Input Select menu Tape Mixes the playback signalsNo mixing This menu is displayed by pressing the following keys Audio Audio in SET UP menuTone ∑ Switching the audio level meter scaleFr in increments of 1/10th of a frame Select Audio in CH-MIX Select menuCH-MIX on CH-MIX OFF∑ Mix-and-record ONotesN Sound output based on VTR’s mode and F6, F7 key statusesAudio OUT menu SDI Asign MonitorAudio OUT Monitor menu Moni ShtlVAR ADDAudio OUT SET UP menu JOG Proc F1 A/V PhaseVAR Proc PB FadeData The style is set to the data mode compressed audio PCM The style is set to the normal PCM audio modeTransfers the VTR to the Audio OUT SET UP State menu Dolby-E∑ Fade function F3-F7 Audio OUT SET UP State menuVideo OUT SET UP State menu Audio OUT SDI Asign menu Sdtosd CH1T4 TC/CHR menu EXT LTC INTLTC VTCTC.UB TC.STIntense ∑ Changing the superimposing position Time code displays CTL1 Control signal∑ Time code displays and VTR’s operating modes TCG∑ Error information displays Table of user bit settings