Panasonic HD3700H operating instructions Free, All

Page 15

HOME menu

Key

Key designation

 

Description

F8

SET UP

Transfers the VTR to the HOME SET UP menu screen.

 

 

 

 

F9–F10

——

 

 

F11

PREAD A°

This is used during insert editing in the AUTO or MANUAL EDIT

 

For setting audio pre-read

mode when the already recorded digital signals are to be read in

 

to ON or OFF

advance and used as the editing source. To set the item to ON,

 

(SD mode only)

press the F together with the F11 or F12 key. To set it to OFF,

 

 

press the F11 or F12 key on its own. When ON is selected as

 

 

the setting, refer to the section on pre-read editing (next page).

F12

PREAD V°

ON: The digital signals are read in advance (pre-read).

 

For setting video pre-read

OFF: The digital signals are not read in advance (pre-read).

 

to ON or OFF

 

Simultaneous playback is possible during editing.

 

(SD mode only).

If OFF is selected by the F11 or F12 key, vibration may occur

 

 

when EE has been selected on the STATE screen. (This

 

 

happens only when the input and output of the same channel

 

 

have been connected.)

 

 

If ON has been set for either of these items, the up-converter

 

 

picture will be muted.

 

 

 

 

F13

REC INH

FREE:

Enables recording.

 

For setting the record

NRML.REC: Prohibits normal recording; enables editing. (The

 

inhibit mode.

 

REC INHIBIT lamp blinks at long intervals.)

 

 

ALL:

Prohibits all recording. (REC INHIBIT lamp

 

 

 

glows.)

 

 

The CASSETTE REC INHIBIT mode which is set using the

 

 

recording inhibit pins on the cassette tape takes precedence

 

 

over this key’s setting.

 

 

 

 

°The above functions can be set only when the 480/59.94i system format is selected.

– 15 –

Image 15
Contents Software Operating InstructionsContents Test IC Card Error LOG Menu screen transitions Multi CUE Multi CUE SET UP Assemble Manual Edit S T A G Turn on the power Home menu is displayed Turning on the powerCH1 SER Home menu displays∑ Display lamps CH1 AESHD Free SD FreeDual ∑ Time code displays ∑ Setting mode display area∑ Remaining tape time ∑ User file display00 00 00 ∑ Setting the initial value for the time codePress the 4 cursor key Cue time now appears in reverse video ∑ Setting and checking the cue timeThis menu is displayed by pressing the following key Home Home menuKey Key designation Description ALL FreeSD SDI SD SDI OUT ∑ Pre-read editingThis menu is displayed by pressing the following keys Home Home SET UP menuCoarse FieldFRAME11 FineF13 Stby OFF After pressing the F11 key, turn the Adjust controlPreroll F12 StillCursor key Press the ENT key. The setting is now entered∑ Reference Center cursor key∑ Programmed play function This menu is displayed by pressing the following key Video in menuBlack INT SGRamp MULT-BSTVideo OUT HD menu F3 PR BLACK.LConvert This menu is displayed by pressing the following keys Video OUT HD SET UP menuOFF Serial SYS PhaseLine Conv InterpEemode Video OUT HD SET UP State menu∑ Selecting the TAPE/EE output signals Video OUT SET UP State menuVideo OUT SD menu Menu screen Transfers the VTR to the Video OUT SD SET UP CompositeTransfers the VTR to the Video OUT SD SET UP SDI menu CmpstVideo OUT SD SET UP Composite menu Line BLK2 Comb FIL1SYS SC SYS HIs established Video OUT SD SET UP Cmpst State menuThrough The E-E through mode AV minimum delay mode Or Audio OUT F8 F12∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu With the 576/50i format1 With the 480/59.94p format1 Adjustment can be made fromFINE/COARSE With the 480/59.94i formatLine BLK Video OUT SET UP Line BLK video output line blanking menuALL on ALL OFFMove the cursor and select the lines to be blanked ∑ Setting the line blankingVideo OUT SD SET UP SDI State menu Video OUT SET UP State menu Hdtohd Video OUT Convert menuHdtosd SdtohdStandard Wide Narrow Video OUT Convert Hdtosd menuFitv FithVideo OUT Convert Sdtohd menu ConverterSelects the frequency bandwidth of the up-converter output Video OUT Convert Hdtohd menu Controls the enhancement adjustment of the converter outputAudio in menu CUE PCMCH-MIX Audio in PCM Input Select menu Analog DigitalDigital ANA CH2 Selects the signals of the analog CH2 inputCH6 Selection is made in line with the CH5 setting using F10 CH-6Audio in CUE Input Select menu Mixes the playback signals TapeNo mixing This menu is displayed by pressing the following keys Audio Audio in SET UP menu∑ Switching the audio level meter scale ToneFr in increments of 1/10th of a frame CH-MIX OFF Audio in CH-MIX Select menuSelect CH-MIX on∑ Mix-and-record ONotesN Sound output based on VTR’s mode and F6, F7 key statusesAudio OUT menu SDI Asign MonitorAudio OUT Monitor menu ADD ShtlMoni VARAudio OUT SET UP menu PB Fade F1 A/V PhaseJOG Proc VAR ProcDolby-E PCM The style is set to the normal PCM audio modeData The style is set to the data mode compressed audio Transfers the VTR to the Audio OUT SET UP State menu∑ Fade function F3-F7 Audio OUT SET UP State menuVideo OUT SET UP State menu Audio OUT SDI Asign menu Sdtosd CH1T4TC/CHR menu VTC INTEXT LTC LTCTC.ST TC.UBIntense TCG Time code displays CTL1 Control signal∑ Changing the superimposing position ∑ Time code displays and VTR’s operating modes∑ Error information displays Table of user bit settings